All Products
Showing 1-20 of 60 products
Methane CNG Gas Sensor - MQ-4
This is a simple-to-use compressed natural gas (CNG) sensor, suitable for sensing natural gas (composed of mostly Methane [CH4]) concentrations in the air. The MQ-4 can detect natural gas concentrations anywhere from 200 to 10000ppm. This sensor has a high sensitivity and fast response time. Th...
Fermion: MEMS Methane CH4 Gas Detection Sensor (Breakout, 1-10000ppm)
Fermion: MEMS Methane CH4 Gas Detection Sensor employs state-of-the-art micro-electromechanical system (MEMS) technology, endowing the sensor with compact dimensions (13x13x2.5mm), low power consumption (<20mA), minimal heat generation, short preheating time, and swift response recovery. The sens...
Gravity Factory-Calibrated Laser Methane CH4 Sensor
·
This lab-grade methane sensor is designed for quantitative CH₄ measurement in research settings, using TDLAS technology to report methane concentration in %LEL rather than the broad estimates typical of MQ-style gas sensors.It is factory calibrated and intended for reliable data collection in com...
Gas Sensor Breakout
This breakout board provides a convenient PCB adapter for MQ-series gas sensors (MQ-3, MQ-4, MQ-6, MQ-7, and MQ-8). It converts the sensor's oversized, oddly-spaced pins into a standard breakout format that's easy to wire up to a microcontroller. Connect 5 V, ground, and a load resistor to an AD...
Methane Gas Sensor MQ-4
This semiconductor gas sensor detects the presence of methane (CNG) gas at concentrations from 300 ppm to 10,000 ppm, a range suitable for detecting gas leaks. The sensor’s simple analog voltage interface requires only one analog input pin from your microcontroller.
Gravity: Arduino LPG Gas Sensor (MQ4)
INTRODUCTION This is an Arduino CH4 gas sensor. It uses MQ4 probe which is able to detect nature gas, CH4. It is less sensitivity in detecting alcohol, cooking fumes, and cigarette smoke. The sensitivity can be adjusted by the potentiometer. The output is ...
Gravity: MEMS Gas Sensor (CO, Alcohol, NO2 & NH3) - I2C - MiCS-4514
This is a 3.3/5V compatible MEMS gas concentration sensor from DFRobot. This sensor supports the detection of various gas concentrations like CO, C2H5OH (Alcohol), H2, NO2, NH3, and integrates various gas concentration conversion formulas in the code to facilitate the testing and use o...
Fermion: MEMS Gas Sensor - MiCS-5524 (Breakout)
A compact MEMS gas sensor breakout based on the MiCS-5524, capable of detecting concentrations of multiple gases including carbon monoxide (CO), methane (CH4), ethanol (C2H5OH), propane (C3H8), butane (C4H10), hydrogen (H2), hydrogen sulfide (H2S), and ammonia (NH3). The breakout provides analog...
Pololu Carrier for MQ Gas Sensors (Bare PCB Only)
This carrier board is designed to work with any of the MQ-series gas sensors, simplifying the interface from 6 to 3 pins—ground, power and analog voltage output—that are broken out with a 0.1" spacing, making the board compatible with 0.1" headers and standard breadboards and perfboards. This bo...
High Power 100mW 2.4G Wireless Transceiver Module RF Communication NRF24L01P+PA
AS01-ML01DP5 is a 2.4GHZ100mW, high speed (maximum air speed up to 2Mbps) high stability, industrial grade wireless transceiver integrated digital transmission module. Module uses nRF24L01P RF chip and RFX2401C power amplifier chip, built in LNA, the receiving sensitivity of 10dBM, working in the...
Octopus Smoke Sensor MQ-2 Brick OBMQ2
An analogue gas sensor module based on the MQ-2 sensor, part of the Octopus Electronic Bricks series for plug-and-play integration with Arduino and compatible boards. Detects a wide range of combustible gases and smoke with high sensitivity and fast response time. Detectable Gases LPG, i-butane...
Adafruit MiCS5524 CO, Alcohol and VOC Gas Sensor Breakout
·
The Adafruit MiCS-5524 Gas Sensor Breakout is a robust MEMS sensor from SGX Sensortech for detecting carbon monoxide, natural gas leaks, alcohol, and volatile organic compounds (VOCs). It provides a simple analogue voltage output that increases in proportion to the concentration of detected gas —...
Dual Gas CO and CH4 Detection Sensor - MQ-9B
The MQ-9B is a CO and CH₄ gas detection sensor form Winsen. The sensing material of the MQ-9B is SnO2, which has a low conductivity in clean air. It detects carbon monoxide (1.5V) by method of cycling high and low temperature. The sensor’s conductivity gets higher with the CO and CH₄ gas concentr...
AGS02MA TVOC Gas Sensor
The AGS02MA is a MEMS-based TVOC (Total Volatile Organic Compounds) gas sensor with a calibrated digital signal output. It detects a range of polluting gases including ethanol, ammonia, sulfides, benzene vapours, and smoke, making it suitable for air quality monitoring applications. This sensor ...
AGS02MA I2C TVOC Gas Sensor
The AGS02MA is a compact MOX-based TVOC (Total Volatile Organic Compounds) gas sensor with an I2C interface. It features a built-in ADC that outputs gas resistance and parts-per-billion (ppb) readings — higher ppb values indicate more organic compounds in the air. This is a simple, inexpensive s...
MQ-2 smoke sensor module
This is the MQ-2 smoke sensor module. It is sensitive to flammable gases such as LPG, propane, and methane. Find our tutorial here It has four pins:AO: Analog OutputDO: Digital OutputGND: In electronics, we define a point in a circuit to be a kind of zero volts or 0V reference point, on whi...
Gravity: Arduino CO/Combustible Gas Sensor (MQ9)
The Gravity MQ-9 gas sensor detects carbon monoxide (CO) and combustible gases including methane and propane. It uses a semiconductor SnO2 sensing element that cycles between high and low temperatures — detecting CO at low temperature (1.5V) and combustible gases at high temperature (5.0V). With...
Gravity: Arduino Gas Sensor (MQ2)
INTRODUCTION This is a generic Arduino gas sensor. It has MQ2 probe which is able to detect LPG, i-butane, propane, methane ,alcohol, Hydrogen, smoke.It can be used in gas leakage detecting device in consumer and industry markets. It has a high sensitivity and fast response time. ...
Analog CO/Combustible Gas Sensor(MQ9)
The MQ-9 is an analog gas sensor module with high sensitivity to carbon monoxide (CO), methane, propane, and LPG. It uses an SnO2 sensing element that changes conductivity in the presence of target gases, making it suitable for both domestic and industrial gas leak detection. The sensor operates...
Sensor ELECFREAKS PlanetX MQ2
·
The gas sensor is an essential sensor for environmental detection. ELECFREAKS PlanetX MQ2 Sensor can be used for smoke detection, the greater the smoke is, the greater the voltage value will be. It is able to detect the leakage of flammable gases, such as LPG, isobutane, propane, methane, alcohol...
