All Products
Showing 1-20 of 100 products
Adafruit Power Relay FeatherWing
·
The Adafruit Power Relay FeatherWing lets you switch high-power loads — lamps, fans, solenoids, small appliances, and more — directly from any Feather microcontroller board. With a switching capacity of up to 10A at 120 VAC or 5A at 240 VAC (resistive loads), it can handle up to 1,200 watts. The...
Adafruit 8x16 LED Matrix FeatherWing w/o Matrices
·
Create a compact 8×16 LED matrix display for any Feather board with this FeatherWing driver. The HT16K33 I2C driver handles all multiplexing for two 0.8" mini 8×8 LED matrices (128 LEDs total), controlled over just two I2C pins. Works with any Adafruit Feather board. The FeatherWing is perfect f...
Adafruit 4-Digit 7-Segment LED Matrix Display FeatherWing - FeatherWing Only - no matrices!
·
The Adafruit 4-Digit 7-Segment LED Matrix Display FeatherWing makes it easy to add a numeric display to any Feather project. The HT16K33 driver handles all LED multiplexing over I2C, so your Feather only needs two shared pins — leaving all other GPIO free for sensors, buttons, and additional disp...
NeoPixel FeatherWing - 4x8 RGB LED Add-on For All Feather Boards
·
The NeoPixel FeatherWing adds a 4×8 matrix of 32 individually addressable RGB LEDs to any Adafruit Feather board. Using Feather stacking headers or female headers, the wing connects directly on top or bottom of your Feather for a compact, colourful display. Only one pin is required to control al...
8-Channel PWM or Servo FeatherWing Add-on For All Feather Boards
·
The 8-Channel PWM or Servo FeatherWing adds 8 channels of 12-bit PWM output to any Adafruit Feather board via I2C. It uses an onboard PWM driver with a built-in clock, so it runs independently without tying up your microcontroller — unlike the TLC5940 family, no continuous signal is needed. The ...
Adafruit TFT FeatherWing - 3.5 480x320 Touchscreen for Feathers
·
The Adafruit TFT FeatherWing is a 3.5" colour display with a 480×320 resolution, bright 6-LED white backlight, and a built-in resistive touchscreen. It plugs directly into any Adafruit Feather board, giving you a high-resolution colour display with touch input and a microSD card slot for image st...
Adafruit CRICKIT FeatherWing for any Feather
·
The Adafruit CRICKIT FeatherWing is a robotics and electronics driver board that plugs into any Feather mainboard. It adds motor drivers, servo outputs, capacitive touch inputs, NeoPixel control, and an audio amplifier — all managed over I2C via the Adafruit seesaw co-processor, so it only uses t...
Adafruit 4-Digit 7-Segment LED Matrix Display FeatherWing - Blue
·
Add a bright, easy-to-read numeric display to your Feather project with the Adafruit 4-Digit 7-Segment FeatherWing in blue. This combo pack includes the HT16K33-based FeatherWing backpack and a matching 0.56" tall blue 7-segment display with decimal points and a centre colon for clock displays. ...
Adafruit 4-Digit 7-Segment LED Matrix Display FeatherWing - Red
·
Add a bright, easy-to-read numeric display to your Feather project with the Adafruit 4-Digit 7-Segment FeatherWing in red. This combo pack includes the HT16K33-based FeatherWing backpack and a matching 0.56" tall red 7-segment display with decimal points and a centre colon for clock displays. Th...
Adafruit 4-Digit 7-Segment LED Matrix Display FeatherWing - White
·
Add a bright, easy-to-read numeric display to your Feather project with the Adafruit 4-Digit 7-Segment FeatherWing in white. This combo pack includes the HT16K33-based FeatherWing backpack and a matching 0.56" tall white 7-segment display with decimal points and a centre colon for clock displays....
Adafruit 4-Digit 7-Segment LED Matrix Display FeatherWing - Yellow
·
Add a bright, easy-to-read numeric display to your Feather project with the Adafruit 4-Digit 7-Segment FeatherWing in yellow. This combo pack includes the HT16K33-based FeatherWing backpack and a matching 0.56" tall yellow 7-segment display with decimal points and a centre colon for clock display...
Adafruit 0.54 Quad Alphanumeric FeatherWing Display - Blue
·
The Adafruit 0.54" Quad Alphanumeric FeatherWing Display in blue adds a bright, 4-character 14-segment LED display to any Feather board. Each character can display letters, numbers, and symbols, making it ideal for clocks, status indicators, sensor readouts, and more. Driven by the HT16K33 I2C m...
Adafruit 0.54 Quad Alphanumeric FeatherWing Display - Green
·
The Adafruit 0.54" Quad Alphanumeric FeatherWing Display in green adds a bright, 4-character 14-segment LED display to any Feather board. Each character can display letters, numbers, and symbols, making it ideal for clocks, status indicators, sensor readouts, and more. Driven by the HT16K33 I2C ...
Adafruit 0.54 Quad Alphanumeric FeatherWing Display - Red
·
The Adafruit 0.54" Quad Alphanumeric FeatherWing Display in red adds a bright, 4-character 14-segment LED display to any Feather board. Each character can display letters, numbers, and symbols, making it ideal for clocks, status indicators, sensor readouts, and more. Driven by the HT16K33 I2C ma...
Adafruit 4x4 Trellis Feather Acrylic Enclosure + Hardware Kit
·
This laser-cut acrylic enclosure kit turns your 4×4 NeoTrellis setup into a handheld device with an elegant black and white design and beautifully diffused button illumination. Designed to house any Adafruit Feather board (except FONA) alongside the NeoTrellis RGB Driver PCB. The enclosure inclu...
Adafruit 8x8 Trellis Feather M4 Acrylic Enclosure + Hardware Kit
·
This laser-cut acrylic enclosure kit turns your 8×8 NeoTrellis setup (four 4×4 NeoTrellis boards) into a handheld device with an elegant black and white design and beautifully diffused button illumination. Designed to house any Adafruit Feather board (except FONA) alongside four NeoTrellis RGB Dr...
Adafruit TFT FeatherWing - 3.5" 480x320 Capacitive Touchscreen
·
The Adafruit TFT FeatherWing is a 3.5" colour display with a 480×320 resolution, bright white-LED backlight, and a built-in multi-touch capacitive touchscreen that detects up to 5 simultaneous finger presses. It plugs directly into any Adafruit Feather board, making it an easy way to add a high-r...
ESP32-S2 Feather with w.FL Antenna Connector
·
This Feather-format development board combines Espressif’s ESP32-S2 Wi-Fi microcontroller with native USB, 4 MB of flash and 2 MB of PSRAM for compact IoT builds. It is well suited to Arduino or CircuitPython projects where you want low-cost 2.4 GHz Wi-Fi and plenty of memory for larger data buff...
Adafruit HUZZAH32 – ESP32 Feather Board
·
The Adafruit HUZZAH32 ESP32 Feather Board brings the powerful Espressif ESP32 dual-core processor into the Adafruit Feather form factor. With WiFi, Bluetooth Classic, and BLE support, a built-in USB-to-serial converter, automatic bootloader reset, and LiPo battery charging, it's a fully featured ...
Adafruit HUZZAH32 – ESP32 Feather Board (pre-soldered)
·
The Adafruit HUZZAH32 ESP32 Feather Board brings the powerful Espressif ESP32 dual-core processor into the Adafruit Feather form factor. With WiFi, Bluetooth Classic, and BLE support, a built-in USB-to-serial converter, automatic bootloader reset, and LiPo battery charging, it's a fully featured ...
