All Products
Showing 1-20 of 60 products
Elecrow ThinkNode M1 - LoRa Meshtastic Transceiver with 1.54" EPD Screen, GPS & nRF52840 (915MHz)
·
ThinkNode M1 — Off-Grid Meshtastic Communication Device The Elecrow ThinkNode M1 is a compact, fully integrated LoRa transceiver designed for off-grid mesh networking. Pre-loaded with Meshtastic firmware, it enables secure, decentralised communication without any internet or cellular infrast...
ThinkNode M2 Meshtastic (LoRa) Signal Transceiver Powered By ESP32-S3 With 1.3” OLED Display - (Without Battery)
Elecrow ThinkNode-M2 is a high-performance LoRa signal transceiver. It uses the ESP32-S3 module as the main processor and supports Bluetooth. Users can easily configure and monitor the device through their mobile phones. M2 is pre-installed with Meshtastic firmware and equipped with an SX1262 wi...
DFRobot DFR1195 ESP32-S3 LoRaWAN Dev Board with Display
·
This ESP32-S3 development board is built for long-range IoT prototyping using LoRa, LoRaWAN and Meshtastic. It can be used for one-to-one LoRa links, one-to-many LoRa communication, standard LoRaWAN networks, or Meshtastic mesh networking.The board is designed to be approachable for makers and de...
ThinkNode M5 Walkie-Talkie Pro- Meshtastic (LoRa) Signal Transceiver |ESP32-S3 | 1.54” Screen | GPS Function-915 MHz
The Elecrow ThinkNode M5 is a high-performance LoRa communication device powered by the ESP32-S3 processor. Pre-installed with Meshtastic firmware and featuring the SX1262 wireless chip, it efficiently sends and receives LoRa signals for off-grid mesh networking. With its compact, integrated des...
ThinkNode M7 Meshtastic Wireless Communication Gateway, Support PoE Power, Powered By ESP32-S3 and LR1110
This ThinkNode M7 is a high-performance gateway based on the ESP32-S3 module and LR1110 LoRa chip, deeply adapted for the LoRa protocol. The device features an Xtensa 32-bit LX7 dual-core processor with a clock speed of up to 240MHz, providing powerful computing capabilities. It also integrates 2...
CrowPanel Advance 3.5"-HMI ESP32 AI Display for Meshtastic 480x320 Artificial Intelligent IPS Touch Screen with case
The CrowPanel Advance 3.5" is a Meshtastic-ready HMI touchscreen display powered by an ESP32-S3 with an onboard SX1262 LoRa module. It features a 480 × 320 IPS capacitive touch panel, integrated AI voice interaction via microphone and speaker, and a replaceable wireless module design for flexible...
8-Channel 915MHz LoRa Gateway Kit with GPS HAT for Raspberry Pi 4
·
This kit brings a RAK Wireless LoRa concentrator and GPS HAT together with the accessories needed to build a Raspberry Pi powered LoRa gateway. It is made for IoT projects where Wi-Fi range is not enough, or where mobile coverage is limited or unavailable.The HAT supports multi-channel, multi-nod...
SX1278 LoRa Module 433M 10KM Ra-02 Wireless Spread Spectrum Transmission Socket for Smart Home DIY
Ra-02 is a wireless transmission module based on SEMTECH's SX1278 wireless transceiver. It adopts advanced LoRa spread spectrum technology, with a communication distance of 10,000 meters. It has strong ability of anti-jamming and has the function of air wake-up Consumption. The SX1278 RF modul...
LoRaSerial 915MHz Enclosed Kit
·
This kit gives you a pair of enclosed serial radio modems for sending serial data from one point to another over LoRa. It is designed for applications that need simple, reliable data reporting beyond typical WiFi or Bluetooth® range.The radios use a 1 Watt 915MHz transceiver and an open-source pr...
IoT Node for LoRaWAN® Development Board
·
This development board is designed to make building a LoRaWAN® IoT end node much less fiddly. It combines Digi X-ON™ onboarding with the SparkFun Qwiic ecosystem, so you can connect supported Qwiic sensors and get data moving to the cloud quickly.The board ships with firmware installed that can c...
LoRa 1W 915MHz Breakout - 915M30S
·
This breakout is built around the EBYTE 915M30S module, giving you a 1W (30dBm) LoRa transceiver for long-range, low-data-rate wireless projects. LoRa is well suited to links over long distances, low-power sleep operation and data rates around ~500bps.The board is designed to connect to any platf...
SX1278 LoRa Module 433M 10KM
This AI-Thinker LoRa module is built on the Semtech SX1278 chip and operates at 433 MHz with a communication range of up to 10 km. Using Semtech's patented LoRa modulation technology, it achieves an exceptional sensitivity of −148 dBm with +20 dBm (100 mW) transmit power, delivering long-range, l...
Gravity LoRaWAN Node Module EU868 - SX1262
·
This Gravity node module is a long-range, low-power wireless communication module for outdoor IoT sensor projects. It is based on the Semtech SX1262 RF chip, uses LoRa modulation, and operates on the EU868 frequency band for Europe and other regions that use this band.The module can work in LoRa ...
LoRaWAN RA-08H Development Board Integrated RP2040 with 1.8 “ LCD for Long Range Communication
Lora technology and Lora devices have been widely used in the field of the Internet of Things (IoT), and more and more people are joining and learning Lora development, making it an indispensable part of the IoT world. To help beginners learn and develop Lora technology better, we have designed ...
DFRobot Gravity LoRaWAN Node Module US915 (SX1262)
·
This compact wireless node module is designed for long-distance, low-power outdoor IoT projects. Built around the Semtech SX1262 and LoRa modulation, it operates on the 915 MHz US915 band and supports both direct LoRa communication and LoRaWAN networking.It can be used for point-to-point links or...
LoRa Transceiver Module (RFM95CW)
The RFM95CW is an ultra-low-power LoRa transceiver module covering 137–1020 MHz. It delivers sensitivity down to -148 dBm, making it well suited for long-range wireless communication in IoT, remote sensing, and telemetry applications. With a 1.8–3.7V operating range and sleep currents as low as ...
SX1262 LoRa Node Module for Raspberry Pi Pico, LoRaWAN, 915Mhz
SX1262 LoRa Node Module For Pico LoRaWAN Protocol Support Features At A Glance The Pico-LoRa-SX1262-XXXM is LoRa node expansion module designed for Raspberry Pi Pico based on SX1262 with better performance than the SX127X series. The LoRa modulation technology solves the balancing prob...
DFRobot DFR1120-868 LoRaWAN Control Terminal - EU868, RS485, 4km
·
Build remote monitoring and control systems around a single DIN-rail RTU for EU868 LoRaWAN networks. This 868MHz control terminal is designed for industrial IoT, smart agriculture, building automation and environmental monitoring where long-range wireless telemetry and local device control are ne...
LoRa MESH Radio Module - 433MHz
LoRa MESH Radio Module is a high performance, low power, long-range micro-power RF module, using a distributed ad-hoc network communication mode, embedded wireless MESH MANET protocols, users do not need to do anything modified to present devices, protocols, nor need for secondary development...
Fermion BMV080 Fanless PM1/PM2.5/PM10 Air Quality Sensor
·
This ultra-compact particulate matter sensor breakout is built around the Bosch BMV080 sensing unit, using laser-based light scattering with a fanless measurement principle. It can monitor PM1, PM2.5 and PM10 mass concentrations while avoiding the noise, dust build-up and mechanical wear associat...
