All Products
Showing 1-20 of 60 products
LPG Gas Sensor - MQ-6
A simple-to-use MQ-6 gas sensor for detecting liquefied petroleum gas (LPG) — primarily propane and butane — in the air. The sensor detects concentrations from 200 to 10,000 ppm with high sensitivity and fast response time. The MQ-6 outputs an analog resistance that varies with gas concentration...
Gravity: Arduino Propane Gas Sensor (MQ6)
INTRODUCTION This is an Arduino Propane Gas Sensor. It uses MQ6 probe to detect iso-butane, propane and liquefied petroleum gas (LPG). It is less sensitive with alcohol, cooking fumes and cigarette smoke. It can be used in gas leakage detecting equipment in...
Gas Sensor Breakout
This breakout board provides a convenient PCB adapter for MQ-series gas sensors (MQ-3, MQ-4, MQ-6, MQ-7, and MQ-8). It converts the sensor's oversized, oddly-spaced pins into a standard breakout format that's easy to wire up to a microcontroller. Connect 5 V, ground, and a load resistor to an AD...
Gravity Factory-Calibrated Laser Methane CH4 Sensor
·
This lab-grade methane sensor is designed for quantitative CH₄ measurement in research settings, using TDLAS technology to report methane concentration in %LEL rather than the broad estimates typical of MQ-style gas sensors.It is factory calibrated and intended for reliable data collection in com...
Pololu Carrier for MQ Gas Sensors (Bare PCB Only)
This carrier board is designed to work with any of the MQ-series gas sensors, simplifying the interface from 6 to 3 pins—ground, power and analog voltage output—that are broken out with a 0.1" spacing, making the board compatible with 0.1" headers and standard breadboards and perfboards. This bo...
High Power 100mW 2.4G Wireless Transceiver Module RF Communication NRF24L01P+PA
AS01-ML01DP5 is a 2.4GHZ100mW, high speed (maximum air speed up to 2Mbps) high stability, industrial grade wireless transceiver integrated digital transmission module. Module uses nRF24L01P RF chip and RFX2401C power amplifier chip, built in LNA, the receiving sensitivity of 10dBM, working in the...
Octopus Smoke Sensor MQ-2 Brick OBMQ2
An analogue gas sensor module based on the MQ-2 sensor, part of the Octopus Electronic Bricks series for plug-and-play integration with Arduino and compatible boards. Detects a wide range of combustible gases and smoke with high sensitivity and fast response time. Detectable Gases LPG, i-butane...
Threshold Formaldehyde HCHO Detection Sensor (0-20ppm)
·
##Introduction This formaldehyde gas sensor differs from most gas sensors on the market as it does not provide specific gas concentration data. Instead, it detects whether the surrounding environment exceeds or falls below a fixed threshold. It operates on a wide voltage range of 5-24V, with high...
Alcohol sensor for Arduino
An alcohol sensor module for Arduino with both digital (TTL) and analog output. It detects alcohol vapour in the 10–1000 PPM range, with analog output voltage increasing proportionally with concentration. The module also responds to LPG, natural gas, city gas, and smoke. The board features a pow...
Adafruit MiCS5524 CO, Alcohol and VOC Gas Sensor Breakout
The Adafruit MiCS-5524 Gas Sensor Breakout is a robust MEMS sensor from SGX Sensortech for detecting carbon monoxide, natural gas leaks, alcohol, and volatile organic compounds (VOCs). It provides a simple analogue voltage output that increases in proportion to the concentration of detected gas —...
ZMOD4450 Refrigeration Air Quality Gas Sensor Module
·
The ZMOD4450 is a compact gas sensor module for detecting gases associated with food ripening or rotting. It is intended for refrigeration air quality (RAQ) applications such as food storage and shipping, including humid and dusty environments where water spray, condensation or immersion may be p...
Gravity: Arduino Hydrogen Gas Sensor (MQ8)
This is an Arduino hydrogen gas sensor. It has high sensitivity to Hydrogen (H2) and less sensitivity to alcohol, LPG,cooking fumes . Hydrogen gas is highly flammable and will burn in air at a very wide range of concentrations The sensitivity is able to be adjusted by the potentiome...
AGS02MA I2C TVOC Gas Sensor
The AGS02MA is a compact MOX-based TVOC (Total Volatile Organic Compounds) gas sensor with an I2C interface. It features a built-in ADC that outputs gas resistance and parts-per-billion (ppb) readings — higher ppb values indicate more organic compounds in the air. This is a simple, inexpensive s...
Adafruit BME688 - Temperature, Humidity, Pressure and Gas Sensor
The BME688 from Bosch delivers comprehensive environmental sensing in a single compact package. This precision sensor measures temperature, humidity, barometric pressure, and VOC gas levels, all accessible over I2C or SPI. The BME688 is a drop-in replacement for the BME680, adding a programmable...
AGS02MA TVOC Gas Sensor
The AGS02MA is a MEMS-based TVOC (Total Volatile Organic Compounds) gas sensor with a calibrated digital signal output. It detects a range of polluting gases including ethanol, ammonia, sulfides, benzene vapours, and smoke, making it suitable for air quality monitoring applications. This sensor ...
Methane Gas Sensor MQ-4
This semiconductor gas sensor detects the presence of methane (CNG) gas at concentrations from 300 ppm to 10,000 ppm, a range suitable for detecting gas leaks. The sensor’s simple analog voltage interface requires only one analog input pin from your microcontroller.
Gravity: Arduino Gas Sensor (MQ2)
INTRODUCTION This is a generic Arduino gas sensor. It has MQ2 probe which is able to detect LPG, i-butane, propane, methane ,alcohol, Hydrogen, smoke.It can be used in gas leakage detecting device in consumer and industry markets. It has a high sensitivity and fast response time. ...
MQ-2 smoke sensor module
This is the MQ-2 smoke sensor module. It is sensitive to flammable gases such as LPG, propane, and methane. Find our tutorial here It has four pins:AO: Analog OutputDO: Digital OutputGND: In electronics, we define a point in a circuit to be a kind of zero volts or 0V reference point, on whi...
Analog CO/Combustible Gas Sensor(MQ9)
The MQ-9 is an analog gas sensor module with high sensitivity to carbon monoxide (CO), methane, propane, and LPG. It uses an SnO2 sensing element that changes conductivity in the presence of target gases, making it suitable for both domestic and industrial gas leak detection. The sensor operates...
Gravity: Arduino LPG Gas Sensor (MQ5)
The Gravity MQ5 gas sensor is highly sensitive to LPG, natural gas, and town gas, with lower sensitivity to alcohol, cooking fumes, and cigarette smoke. The analogue output is proportional to gas concentration, and sensitivity can be adjusted via the on-board potentiometer. Gravity interface for ...
