All Products

SKU: AF-5401

Introducing the ProS3 - The Ultimate Pro ESP32-S3 Development Board The ProS3 ships with the latest version of CircuitPython with ESP32-S3 support. It also ships with the UF2 bootloader, so you can easily update your ProS3 with the latest CircuitPython firmware, whenever you desire. Just plug you...

SKU: AF-4028

Get started with CircuitPython using this all-in-one starter kit built around the Adafruit ItsyBitsy M4 Express. The ItsyBitsy M4 packs a 120 MHz ATSAMD51 Cortex M4 processor with floating point support, 512 KB flash, and 192 KB RAM into a compact, breadboard-friendly form factor — more than enou...

SKU: AF-3505

The Adafruit Metro M0 Express brings 32-bit ARM power to the familiar Metro/UNO shield-compatible form factor. Powered by the ATSAMD21G18 ARM Cortex M0+ processor at 48 MHz, it offers 256 KB flash and 32 KB RAM — a massive upgrade over the ATmega328-based Metro. Designed from the ground up for Ci...

SKU: AF-5778

The Adafruit Matrix Portal S3 is the next-generation plug-and-play controller for HUB-75 RGB LED matrix panels. Powered by the ESP32-S3 with built-in WiFi and Bluetooth LE, it plugs directly into the back of any compatible matrix — no soldering or wiring required. Just attach power and start codi...

SKU: AF-6080 · MPN: ADA6080

Built around Raspberry Pi’s RP2350 processor, this Cytron robotics controller is made for beginner and intermediate builders who want to create more advanced robots while spending less time on the supporting electronics.The board integrates a 4-channel brushed DC motor driver, servo outputs, GPIO...

SKU: AF-6475 · MPN: ADA6475

Make an internet-connected RGB matrix display without the usual wiring fuss. This board plugs straight into the back of a compatible HUB75 RGB matrix, giving you an easy way to build colourful signs, clocks, status panels and data dashboards with CircuitPython or Arduino.This version uses a u.FL ...

SKU: AF-5651

An I2C breakout board for the RDA5807M FM radio chip, designed by ScoutMakes as a beginner-friendly introduction to electronics and wireless communications. Tune into FM stations, display RDS data (station and song names), and control everything from an Arduino or CircuitPython sketch. The board...

SKU: AF-4745

The Adafruit Matrix Portal is a plug-and-play controller for HUB-75 RGB LED matrix panels. Powered by an ATSAMD51 (Cortex M4) with an ESP32 WiFi coprocessor, it plugs directly into the back of any compatible matrix — no soldering or wiring required. Just attach power and start coding in CircuitPy...

SKU: AF-5600

The Adafruit Metro M7 with microSD is powered by the NXP iMX RT1011 ARM Cortex M7 processor running at 500 MHz — the fastest Metro board available. With 8 MB of QSPI flash, 128 KB SRAM, a built-in microSD card slot, and the standard Metro/UNO shield-compatible form factor, this board delivers exc...

SKU: AF-3500

The Adafruit Trinket M0 is a tiny but powerful microcontroller board built around the ATSAMD21E18 32-bit Cortex M0+ processor. It shares the same compact form factor and pinout as the original Trinket, but with a massive upgrade in processing power, memory, and connectivity — including native USB...

SKU: AF-3857

The Feather M4 Express is built around the ATSAMD51J19, a 120 MHz Cortex M4 processor with hardware floating point and DSP instructions, 512 KB flash, and 192 KB RAM. It ships with CircuitPython pre-loaded — plug it in and it appears as a small USB drive with main.py ready to edit. No installs, I...

SKU: AF-3403

The Feather M0 Express is Adafruit's CircuitPython-optimised Feather, built around the ATSAMD21G18 ARM Cortex M0+ processor. It combines the standard Feather M0 platform with 2 MB of SPI flash storage, a Mini NeoPixel, and a UF2 bootloader for drag-and-drop programming — no special tools or drive...

SKU: AF-3501

The Adafruit GEMMA M0 is a tiny, coin-sized microcontroller board designed for wearable electronics and small projects. Despite its quarter-sized footprint, it packs serious power with an ATSAMD21E18 32-bit Cortex M0+ processor, 256 KB of Flash, and 32 KB of RAM — a massive upgrade over the origi...

SKU: AF-3727

The Adafruit ItsyBitsy M0 Express is a compact yet powerful microcontroller board built on the ATSAMD21 Cortex M0+ running at 48 MHz. At just 1.4" × 0.7", it delivers the same capability as the Metro M0 or Feather M0 Express in a fraction of the size — perfect for shrinking prototypes into final ...

SKU: AF-3938

The NeoTrellis M4 Mainboard combines an ATSAMD51 Cortex M4 processor, a 4×8 grid of NeoPixel-lit elastomer button pads, stereo audio output, microphone input, and a triple-axis accelerometer into one compact, programmable board. Think of it as a button-mashing, light-flashing, tune-making powerho...

SKU: AF-4600

The Adafruit QT Py SAMD21 is the original QT Py — a tiny development board built around the ATSAMD21E18 (ARM Cortex-M0+ at 48 MHz) with native USB, a STEMMA QT connector, and an RGB NeoPixel. It's the same chip found in the popular Trinket M0 and GEMMA M0, now in a Seeed Xiao-compatible form fact...

SKU: AF-5128

The Adafruit MacroPad RP2040 Starter Kit is a complete programmable 3×4 macro keyboard powered by the Raspberry Pi RP2040 microcontroller. This all-in-one kit includes the MacroPad board, key switches, keycaps, enclosure, and hardware — ready to assemble with no soldering required. Program it wi...

SKU: AF-5056

The Adafruit Trinkey QT2040 is an RP2040-based microcontroller that plugs directly into any USB-A port on your computer or laptop. With a STEMMA QT / Qwiic connector on the end, it turns any I2C sensor or accessory into a plug-and-play USB device — no breadboard or soldering required. The board ...

SKU: PH-104040

The Commander is a multipurpose handheld button and LED board with accelerometer and microSD slot with CircuitPython support preloaded! It can be used as a USB keyboard, keystroke replay, gesture control device, serial communication and more! It's designed to be held in either hand and can be...

SKU: AF-4888

The Adafruit ItsyBitsy RP2040 brings the Raspberry Pi RP2040 to the compact ItsyBitsy form factor. Featuring a dual-core Cortex M0+ running at 125 MHz, 264 KB RAM, and 8 MB of SPI Flash, it packs serious power into a board just 1.4" × 0.7" — perfect for shrinking prototypes into tiny final builds...