All Products
Showing 1-20 of 100 products
Adafruit 50 pin 0.5mm pitch FPC Adapter
·
Break out those tricky 0.5 mm pitch flex cable connections to breadboard-friendly 0.1" spaced headers with this FPC adapter board. The 50-pin connector on top accommodates most ZIF and snap-style FPC connectors, and each pin is broken out to a standard 0.1" × 0.1" header pad for easy prototyping....
Fermion: 1.8" 128x160 IPS TFT LCD Display with MicroSD Card Slot (Breakout)
A 1.8-inch IPS TFT LCD display module with 128×160 resolution and an integrated microSD card slot for reading full-colour bitmaps. Driven by the ST7735S chip over SPI (4-wire), the display offers a 120° viewing angle and low power consumption, making it suitable for sensor dashboards, status moni...
SparkFun GNSS Flex pHAT - LG290P - SparkFun Electronics
·
Achieve robust, centimetre-level RTK positioning in challenging RF environments with the SparkFun LG290P GNSS Flex pHAT. This all-in-one development board combines a versatile pHAT carrier with the powerful Quectel LG290P module, featuring advanced anti-jamming technology ideal for navigation in ...
50-pin 0.5mm FFC / FPC Extender
·
This 50-pin FFC/FPC extender lets you connect two 50-pin 0.5mm pitch flat cables end-to-end to extend their total length. Simply plug a cable into each side of the board and you have a longer cable run — useful when the stock cable isn't quite long enough to reach. The extender has two flip-lock...
Particle, VOC, Humidity, and Temperature Sensor - SEN54
The SEN54 sensor module from Sensirion combines the measurement of particulate matter, VOC, humidity, and temperature in a single package. The SEN54 sensors provide fully calibrated outputs with a digital interface, a strong lifetime under 24 h/day operation, and a compact form factor. The combin...
Fermion: MEMS Ethanol EtOH Gas Detection Sensor (Breakout, 1-500ppm)
The Fermion MEMS Ethanol (EtOH) Gas Detection Sensor uses micro-electromechanical system (MEMS) technology for compact, low-power ethanol gas detection. With a detection range of 1–500 ppm, it provides qualitative measurement of ethanol concentration via an analogue voltage output. The MEMS desi...
KnowFlow Basic Water Monitoring Kit
·
Build a DIY water quality monitor for field studies, teaching or environmental projects with the KnowFlow Basic Kit. This Arduino-based kit measures two key water parameters: pH and electrical conductivity (EC).Data can be recorded automatically to a micro-SD card for later analysis, and the Blun...
3 Pin 0.1 Header with Crimp Pins - 2.54 pitch
A 3-pin single-row crimp connector housing with 2.54 mm (0.1") pitch, designed for PCB-to-PCB or cable-to-PCB connections. The white nylon wafer housing features locking and polarising, with tin-plated brass pins that protrude 3.4 mm for PCB soldering. Housings can be butted end-to-end to form l...
16-Conductor Ribbon Cable with IDC Connectors 20"
A 20" (50 cm) 16-conductor ribbon cable with IDC connectors on both ends. Ideal for connecting to 16-pin character LCDs, shrouded box headers, and other 2×8 pin interfaces in electronics projects. Specifications Conductors – 16 Connector Type – IDC (both ends) Length – 20" (~50 cm) Pin Pitc...
Header - 2x5 Pin (Female, 1.27mm)
A compact 2×5 pin female through-hole header with 1.27 mm (50 mil) pitch. This is the standard configuration used for JTAG and SWD debugging connections on microcontroller boards. Specifications Configuration – 2×5 (10 pins total) Gender – Female Pitch – 1.27 mm (50 mil) Mounting – Through-...
Arduino Uno DIP Edition
This DIP-package edition of the classic Uno is built around the ATmega328 microcontroller and gives you a familiar Arduino platform for learning, prototyping and shield-based projects.It brings out 20 digital input/output lines, including PWM-capable pins and analogue inputs, with the essentials ...
Arduino Wi-Fi Shield
The Arduino WiFi Shield allows an Arduino board to connect to the internet using the 802.11 wireless specification (WiFi). It is based on the HDG204 Wireless LAN 802.11b/g System in-Package. An Atmega 32UC3 provides a network (IP) stack capable of both TCP and UDP. Use the WiFI library to write s...
IR Break Beam Sensor (50cm)
An infrared break-beam sensor pair for simple, reliable motion detection. The emitter sends a beam of invisible IR light to the receiver — when an object passes between them and breaks the beam, the receiver outputs a signal. Works up to 50 cm at 5 V with a fast response time under 2 ms. The com...
Jumper Wires Premium 6 F/F Pack of 50
Premium female-to-female jumper wires, 155mm (6″) long, for connecting between male headers on development boards, breakout boards, and breadboards. The 0.1″ pitch connectors fit standard pin headers and can be installed side by side. Specifications Connector Type – Female to Female (F/F) Len...
Crimp Pins for Female Housing Pins(PH2.54)
A pack of 50 crimp pins for 2.54 mm (0.1″) pitch female housing connectors. Use these pins with a crimping tool and compatible housings to create custom cables that mate with standard 2.54 mm male header pins. Specifications Pitch – 2.54 mm (0.1″) Type – Female crimp pin for DuPont-style hous...
DFRobot DFR1092 3.5-inch IPS Touch Screen for ESP32
·
This 3.5-inch display module combines a 480 × 320 IPS panel with capacitive touch for ESP32 and Arduino projects. Its optical bonding process laminates the touch panel and display together, improving clarity while helping reduce reflections and dust ingress.For wiring, the module offers both a st...
Board to Board Double Slot Male Connector - 50 pin, 0.5mm
This surface-mount 50-pin board-to-board connector with 0.5 mm pitch and double-slot male configuration is used on Alchitry FPGA boards. Soldered to the underside of a board, these connectors allow Alchitry FPGA boards to stack on one another for modular expansion. Sold as a single connector — f...
Pololu 5V, 300mA Step-Down Voltage Regulator D24V3F5
The Pololu D24V3F5 is a compact buck (step-down) switching voltage regulator that converts input voltages up to 42 V down to a fixed 5 V output. With a typical efficiency of 80–90%, it significantly outperforms linear regulators like the 7805, especially when there is a large difference between i...
Gravity: N20 Micro Metal Gear Motor with Integrated Drive (3V-6V, 1:150/133RPM)
·
The Gravity N20 is a compact all-metal gear motor with an integrated drive chip that simplifies motor control to a single PWM signal. Operating on 3–6 V, it uses a PPM servo-style control method — forward, stop, and reverse are set by pulse width — eliminating the need for a separate motor driver...
ECell: Breadboard-Plugin Capacitor
The ECell Breadboard-Plugin Capacitor pack provides common capacitor values in a breadboard-friendly module format. Each capacitor is mounted on a small PCB with gold-plated pins that plug directly into standard breadboard tie-points — no bent leads or jumper wires needed. Capacitance values, po...
