All Products

SKU: AF-5743

The Adafruit Mini I2C Gamepad is a compact controller breakout with a 2-axis thumb joystick and 6 momentary buttons (4 large, 2 small), all communicating over I2C via the seesaw co-processor. It doesn't use any of your GPIO or analogue pins — just connect via STEMMA QT / Qwiic and start reading i...

SKU: AF-3632

The Adafruit Joy FeatherWing adds a 2-axis joystick and five buttons to any Feather board over I2C — no GPIO or analogue pins consumed. Using Adafruit's Seesaw technology, an onboard helper microcontroller reads the joystick and button inputs and presents them as a clean I2C interface, compatible...

SKU: DF-DFR0061

The Gravity Joystick Module V2 provides two-axis analogue control (X and Y) plus a digital push-button switch. Connect the two analogue outputs and one digital output to your Arduino or other microcontroller for intuitive directional input — ideal for robot control, menu navigation, and game proj...

SKU: AF-245

The 2-Axis Joystick provides analogue input for your projects using two independent 10K potentiometers — one per axis. It reports position as either voltage or resistance, making it compatible with a wide range of microcontrollers including Arduino and Raspberry Pi. The modular form factor plugs...

SKU: PR-PIM034

An analogue joystick module for the Pimoroni Flotilla ecosystem, featuring a two-axis thumbstick with a built-in click button. Use it as a game controller, to steer a robot, or as a general-purpose input device. Key Features Analogue Joystick – Two-axis control with centre return Click Button...

SKU: EC-ACS77312JS

Turn your Arduino into a simple game controller with this plug-and-play joystick shield. It features a two-axis thumb joystick with a select button plus four additional momentary push buttons — giving you retro game-pad style input for navigation, gaming, and menu control. The shield sits direct...

SKU: AF-512

A PSP/Xbox-style analog thumb joystick with a built-in press-to-select button, mounted on a breakout board designed for easy panel mounting. Unlike simple directional joysticks, this analog stick provides precise, proportional X and Y readings for accurate positional control. The breakout board ...

SKU: AF-2765

The Mini 2-Axis Analog Thumbstick is a compact, self-centring joystick with a black rocker cap, similar in style to PSP joysticks. It provides smooth directional analogue input using two 10 kΩ potentiometers — one for the X-axis and one for the Y-axis. The voltage output follows the motion of th...

SKU: AF-3103

Sometimes a simple analog control device can be the perfect tactile solution for your project, but they can be surprisingly hard to come by. Luckily we've found a low cost, quality PSP 3000 2-Axis Analog Thumb Joystick to fulfill your directional analog input needs! This is a replacement ...

SKU: AF-5753

Bring your classic PC joystick back to life. This adapter board takes any legacy DE-15 game port joystick and converts its analogue X/Y axes and two buttons to I2C via an onboard ATtiny816 running the Adafruit seesaw firmware. No analogue inputs needed on your microcontroller — just plug in a STE...

SKU: DF-DFR0008

The upgraded Arduino Input Shield includes a two axis mini joystick (with moment switch) as well as four colored push buttons(Red,Yellow,Blue,Green). The reserved APC220 Radio Data Module(SKU:TEL0005) interface and the Xbee interface is deisgned to facilitate the realization of wireless ro...

SKU: EF-EF03417

Joystick:bit V2 is a JoyStick based on micro:bit. It contains a 4-direction joystick and 4 undefined buttons as as classic JoyStick. At the same time, with the board buzzer and vibration motor, it also enhance game experience. Joystick:bit V2 can be remote control handle for micro:bit which on...

SKU: AF-5628

A compact, self-centering analogue thumbstick with a feel and size similar to Nintendo Joy-Con joysticks. It uses two 10kΩ potentiometers (one for each axis) to provide proportional X/Y analogue output, plus a centre-press tactile button for selection — ideal for directional control in robotics, ...

SKU: AF-3102

A compact analogue joystick with two 10kΩ potentiometers and a spring-return mechanism. Unlike arcade-style joysticks that use clicking switches, this joystick provides smooth, proportional analogue output across a full 50° range in both X and Y axes. Connect each potentiometer between ground and...

SKU: SF-COM-16273

A 16 mm deluxe thumb joystick similar to the analogue sticks found in PlayStation controllers. Two 10K potentiometers provide analogue position data for the full range of motion on both axes, and a built-in select button activates when the joystick is pressed down. The mechanical parts are mostl...

SKU: SF-KIT-14051

The SparkFun Wireless Joystick Kit gives you a customisable wireless controller for XBee-based projects. Built around the SAMD21 microcontroller, it provides a flexible alternative to hobby RC transmitters — configure it your way at a fraction of the cost. The kit can be assembled in two configu...

SKU: SF-DEV-14008 · MPN: DEV-14008

This breakout board makes it easier to build a custom wireless controller for XBee-based projects, without relying on a standard hobby RC transmitter. It is designed for makers who want to choose their own control layout for robots, vehicles and other radio-controlled builds.The board includes an...

SKU: PI-JOYSTICK-ZIPPYY

This joystick is the ideal controller for your mini arcade project!With a harder spring for a more satisfying response the Zippyy joystick can be set to either 2-way, 4-way or 8-way using the attached restrictor plate.The ball handle makes for a comfortable grip for players of all ages and the sh...

SKU: LB-LR0001

This convenient little module allows you to control both the X-axis and Y-axis using two 10k potentiometers.  Also featured is an additional pushbutton switch providing another optional input for your project.  Compatible with Arduino, Raspberry Pi, Micro:bit and other microcontrolle...

SKU: LB-LS1025

The 2-Player DIY Arcade Joystick Kit includes everything you need to build your own retro arcade controls. With 20 LED arcade buttons, two joysticks (red and blue), two USB encoders, and all necessary cabling, this kit is ready to connect to a Raspberry Pi, PC, or Mac. The USB encoders present a...