All Products

SKU: AF-1388

Make your own USB connections without slicing apart a USB cable and soldering those thin wires inside. These DIY "USB shells" are available in USB A plug, micro B, mini B and USB A socket.Each shell comes with a two-part snap plastic shell and a proper connector with easy-to-solder tabs.

SKU: AF-1389

Make your own USB connections without slicing apart a USB cable and soldering those thin wires inside. These DIY "USB shells" are available in USB A plug, micro B, mini B and USB A socket.Each shell comes with a two-part snap plastic shell and a proper connector with easy-to-solder tabs.

SKU: AF-1827

Make your own USB connections without slicing apart a USB cable and soldering those thin wires inside. This is the 'slim' version of the DIY USB-A Male connector. It's a little more elegant because instead of snapping two pieces together the connector press-fits into the overmolding for a mode...

SKU: AF-1826

Make your own USB connections without slicing apart a USB cable and soldering those thin wires inside. This is the 'slim' version of the DIY MicroB Male connector. It's a little more elegant because instead of snapping two pieces together the connector press-fits into the overmolding for a mod...

SKU: DF-TEL0145

Does it still bother you that you cannot access the Internet anytime anywhere? Here comes a convenient dual-band wireless network card, play-and-play. Bring you a very fast and stable wireless network!Based on IEEE 802.11n advanced wireless network protocol, this network card offers up to 400Mbps...

SKU: AF-993

This handy USB extension cable will make it easy for you to extend your USB cable when it won't reach. The connectors are gold plated for years of reliability. We use these handy cables all over our factory and homes. Cable is standard "Adafruit black".Cable length: 10 feet (3 meters)

SKU: AF-3438

Your cell phone charges off of USB, but can you really trust that charging station at the airport? Now you can control when to allow data in or out of your device with this little USB extension cable. You can plug it onto the end of any USB data/sync cable you have: mini-USB, micro-USB, Apple ...

SKU: SF-PRT-09011

USB Type ‘A’ Female SMD connector. For use with any PCB that will be used with a Type A to Type A USB cable. Designed to mount to the UBW32. Documents: Datasheet

SKU: SF-PRT-00139

A USB Type-B female connector with 0.1" pin spacing, suitable for use on development boards and perfboard. The four connection pins fit standard 2.54 mm pitch headers. The two support posts can be accommodated by drilling 80 mil holes, or trimmed off entirely for a flush fit. Specifications Co...

SKU: SF-COM-15111

USB-C is quickly becoming more and more prominent in the maker community because, let’s be honest, who likes trying three times to insert USB into a port? This is a 16-pin, female, USB Type C connector that is commonly found in smart phones, laptops, and other newer electronics. Each USB-C connec...

SKU: DF-TEL0137

This GPS receiver brings much more accurate and faster positioning performance with stronger signal compared with traditional GPS receivers. It is compact, lightweight and portable. Integrated with built-in receiving antenna, this product adopts a high-precision positioning chip and industrial-...

SKU: DF-TEL0138

This is an Ublox chip-based GPS receiver module of low power and high sensitivity that can receive 56 channels satellite signal. Compared with traditional GPS receivers, it brings much more accurate and faster-positioning performance with stronger signals. Integrated with a built-in receiving ant...

SKU: SF-CAB-28389 · MPN: CAB-28389

This adapter cable lets a Teensy 4.1 or Teensy 3.6 use its USB host capability by converting the dedicated 5-pin USB host header connection into a standard female USB Type-A port.Once fitted, your Teensy can act as a USB host for peripherals such as keyboards, mice, MIDI controllers and USB hubs,...

SKU: AF-5858 · MPN: ADA5858

Add USB host capability to a Feather-based project, so your microcontroller can talk to devices like keyboards, mice and USB mass storage drives. This board is built around the MAX3421E, a well-proven USB host controller that communicates with the main Feather over SPI plus an IRQ pin.It is a han...

SKU: EC-ARS3421U

A USB Host shield for Arduino that adds USB 2.0 full-speed and low-speed host functionality to your project. Allows your Arduino to communicate with USB devices such as keyboards, mice, game controllers, USB hubs, and more. Communicates via SPI and is compatible with Arduino Uno, Duemilanove, Meg...

SKU: AF-4844

This ordinary-looking USB cable actually has a surprise trick up its rubber sleeve. It's kinda like a 'miniature KVM' (minus the video part, and only one USB port). The mechanical switch connects to the D+ and D- pins on the two USB A host ports. So when you switch back and forth, the USB pe...

SKU: SS-103990003

A compact USB 2.0 hub with three USB-A ports and a built-in multi-format memory card reader. Bus-powered from a single USB port — no external power supply needed. Works with Raspberry Pi, laptops, desktops, and other USB hosts. Key Features 3× USB-A Ports – Expand your USB connectivity Built-...

SKU: LB-00067

A 4 port USB Hub

SKU: EC-CEF02096C

If you want to connect Raspberry Pi which has only one single micro port to various USB, the USB Hub for Raspberry Pi Zero is your right choice. Especially there is no soldering and wires reqiured. The USB Hub for RPI Zero has 4 USB extension interface and external battery, and the USB 2.0 has a ...

SKU: LB-LAMP-A

A pre-assembled USB-powered LED lamp kit — ready to use straight out of the box. This version comes fully soldered and tested, making it ideal for classroom activities where students design and build a lampshade without needing soldering skills. Key Features Fully Assembled – Soldered and test...