All Products
Showing 61-80 of 94 products
Mini Dual Button Unit
Description Dual Button, as its namesake, has two buttons with different color. If the Button unit is not enough, how about double it up to a pair. They share the exact same mechanism, button status can be detected by the input pin status,simply capture the high/low electrical level. This unit...
2.54mm Mini Proto Unit 70 Holes
The M5Stack Proto Unit is a compact universal prototyping board designed for the M5Stack ecosystem. It connects to an M5Stack Core via the Grove port, giving you the freedom to build custom circuits and add-ons for your projects on a standard 2.54mm pitch perfboard. Key Features 70 Through-Hol...
Mini 3A Relay Unit
Description RELAY, as its namesake, is a M5Unit that implenments a Relay functions. Relay can be used as an electrically operated switch, uses an electromagnet to mechanically operate a switch,to where it is necessary to control a large power load circuit by a separate low-power signal, like a...
16-Key Capacitive Touch Unit (MEGA328P)
The M5Stack 16-Key Capacitive Touch Unit is a Makey Makey-inspired input device built around an ATmega328P microcontroller. It detects capacitive touch across 16 key pads, allowing you to turn everyday objects — fruit, foil, water, or anything conductive — into touch-sensitive buttons. A built-in...
RBG LED is a extendable strip light with RGB LED 200cm
A 200 cm extendable RGB LED strip using digitally addressable WS2811 NeoPixel LEDs with a Grove connector. Each LED can display its own colour and brightness independently, and multiple strips can be daisy-chained together to create longer displays. Compatible with M5Stack units via the Grove A ...
Trace Unit (For Lidar Bot/Bala)
Description TRACE is mainly consist of 4 sets of IR, 1x infrared emitting and 1x infrared receiver for each set. The infrared LEDs should be placed towards and close to the ground where having black tracing lines and white background (or vice versa) layouts. The IR transmitter keep emitti...
Finger Print Unit (FPC1020A)
The FINGER Unit (FPC1020A) is an all-in-one capacitive fingerprint sensor with built-in fingerprint registration, verification, and management. It communicates via UART and connects to M5Stack devices through the Grove C port. Configurable security levels and fast matching make it suitable for bi...
Mini Heart Rate Unit (MAX30100)
Description HEART is build with MAX30100.. MAX30100 is a complete pulse oximetry and heartrate sensor system solution designed for the demanding requirements of wearable devices. The MAX30100 provides very small total solution size without sacrificing optical or electrical perform...
RBG LED is a extendable strip light - 50cm
A 50 cm addressable RGB LED strip unit with digitally controllable NeoPixel (WS2811) LEDs. Each LED can display any RGB colour and brightness individually via a single-bus protocol. The strip connects via a Grove cable and is extendable — multiple strips can be daisy-chained together for longer d...
Experimental Proto Board Set include DHT12 Bus Socket
Description In comparision,**PROTO function Module** includes more stuff than PROTO Board.Other than the PROTO board, it also comes with a DHT12(temperature and humility sensor), M-BUS Socket and more. PROTO Board is a pure universal prototype perboard. You can have the total free...
Adafruit MCP4728 Quad DAC with EEPROM - STEMMA QT / Qwiic
·
The Adafruit MCP4728 Quad DAC with EEPROM provides four independent 12-bit digital-to-analogue converters in a single I2C package. Set precise output voltages for your project, and save your settings to the built-in EEPROM so they're automatically restored on power-up. Each channel supports two ...
Devicter Relay 1 Node V1.0 (ATmega 328) – with support OTA update
The devDuino Relay 1 Node V1.0 is a compact Arduino-compatible microcontroller board with a built-in mains power supply (110–220 V AC), a 10 A relay, and an nRF24L01+ wireless transceiver. It is designed for building wireless home automation networks with support for over-the-air (OTA) firmware u...
Adafruit BrainCraft HAT - Machine Learning for Raspberry Pi 4
·
The Adafruit BrainCraft HAT is a Raspberry Pi 4 add-on board designed for machine learning and AI projects at the edge. It combines a display, stereo microphones, audio output, camera connector, user controls, and sensor ports into a single HAT, providing everything needed to build audio and vide...
Arduino Sensor Kit
Arduino Sensor Kit is made for Makers who have just started using Arduino to explore the vast space of electronics and programming. This kit teaches how to connect and program basic Grove modules that includes both sensors and actuators. Grove is an open-source, modulated, and ready-to-use toolse...
JST PH 4-pin Horizontal Connector (10-pack)
·
Designing boards with plug-n-play connectivity is a snap, with STEMMA connectors. Here's a pack of 10 of our favorite 2mm pitch connector - the JST PH 4 pin. These are the horizontal style. You can use these with any of our JST PH 4 / STEMMA cables. They're not STEMMA QT compatible (those...
Maker Pi Pico Base - Raspberry Pi Pico Not Included
·
Cytron's Maker Pi Pico Base incorporates the most wanted Reset button for your Raspberry Pi Pico and gives you access to all GPIO pins on two 20-pin headers, with clear labels. Each GPIO is paired with an LED indicator for convenient code testing and troubleshooting. The bottom of the board even ...
Maker Pi RP2040 - Motor and Robot Controller
Cytron's Maker Pi RP2040 features the new Raspberry Pi RP2040 chip embedded on a robot controller board. The board comes with a dual-channel DC motor driver, 4 servo motor ports, and 7 Grove I/O connectors. Now you can build your new robot friend while simultaneously trying out the new RP2040 chi...
JST PH 2mm 4-pin Vertical Connector (10-pack) - STEMMA
·
Designing boards with plug-n-play connectivity is a snap, with STEMMA connectors. Here's a pack of 10 of our favorite 2mm pitch connector - the JST PH 4 pin. These are the vertical style.You can use these with any of our JST PH 4 / STEMMA cables. They're not STEMMA QT compatible (those use the sm...
FeatherS2 Neo - Blingy RGB ESP32-S2 Feather Development Board
·
Introducing the FeatherS2 Neo - The full-featured ESP32-S2-based development board in a Feather format from Unexpected Maker. The FeatherS2 Neo is a powerhouse, fully souped up with 4 MB of Flash memory (for firmware and file storage) and 2 MB of QSPI-based external PSRAM so you can have massive ...
BeaglePlay
BeaglePlay is an open-source single board computer built around the Texas Instruments AM6254 processor (quad-core ARM Cortex-A53) with 2GB DDR4 RAM and 16GB eMMC storage. It is designed to simplify connecting sensors, actuators, and human interfaces to a reliable embedded Linux system. The board...
