All Products

SKU: AF-3366

Stacking headers combine a female socket on top with extended male pins on the bottom, allowing you to stack multiple PCBs on top of each other. Solder the long pins through a board, then plug another board's female headers onto the pins below while connecting yet another board into the sockets a...

SKU: AF-3646

Precision-machined Swiss-pin female socket headers for a tight, reliable fit. Unlike standard stamped-metal headers, Swiss-pin sockets use machined round contacts that grip the matching Swiss-pin male plugs securely — standard square-pin male headers will not fit these sockets. Each header strip...

SKU: AF-3647

Precision-machined Swiss-pin male plug headers for a tight, reliable fit. Unlike standard stamped square-pin male headers, these use machined round pins that pair exclusively with Swiss-pin female sockets — they are not compatible with standard female headers. Each header strip is 36 pins long w...

SKU: DF-FIT0801

A compact DC-powered vacuum pump ideal for beginners building inflatable or pneumatic projects. With a power consumption of just 2.5W at 5V, it can share the same power supply as DC motors or servo systems in your project. When powered on, the pump draws air from the side port and expels it from...

SKU: PL-1590

This Pololu 25D metal gearmotor combines a low-power 6V brushed DC motor with a 377.93:1 metal spur gearbox. The high gear ratio delivers substantial torque at low speed, making it well suited for applications that need strong, controlled movement rather than high RPM. The gearmotor uses the sta...

SKU: LB-LR07

A comprehensive collection of 37 different sensors and modules for Arduino, covering a wide range of inputs and outputs for electronics projects. Everything comes neatly organised in a clear plastic storage case. From environmental sensing (temperature, humidity, light) to user input (joystick, ...

SKU: LB-00253

A compact 3.7 V lithium-ion polymer (LiPo) battery with a 180 mAh capacity (~0.6 Wh). Thin, lightweight, and fitted with a genuine 2-pin JST-PH connector for reliable, snag-free connections to compatible chargers and development boards. Includes built-in protection circuitry to guard against ove...

SKU: LB-LS7935

Power your projects reliably with this 3.7V 18650 Lithium Battery 2-pack, featuring a convenient tip head design for easy integration into battery holders and devices. With a 2600mAh capacity, these cells are ideal for portable electronics, DIY builds, and power applications requiring stable, rec...

SKU: LB-00254

A 3.7 V lithium-ion polymer (LiPo) battery with a generous 2500 mAh capacity (~10 Wh). Thin, lightweight, and fitted with a 2-pin JST-XH connector for reliable connections to compatible chargers and development boards. Includes built-in protection circuitry to guard against overcharging, over-di...

SKU: DF-DFR0064

The DFRobot 386AMP audio amplifier module is based on the LM386 low-voltage audio power amplifier IC. With a fixed voltage gain of 26 dB (20× amplification) and static power consumption of only 24 mW at 6V, it's well suited for battery-powered applications. Connect a microphone, MP3 module, or o...

SKU: AF-822

A compact 38-piece precision screwdriver set designed for disassembling and working with small electronics — phones, cameras, game consoles, and other portable devices. The large rubber-grip handle provides comfortable, non-slip control, and the magnetic bit holder keeps bits securely in place. ...

SKU: DF-FIT0168

A waterproof DC-DC step-down converter that takes 11–35V DC input (compatible with 12V and 24V systems) and outputs a regulated 7.5V at up to 5A (38W). The sealed, shockproof enclosure and 96% efficiency make it well suited for robotics and outdoor applications. Key Features Wide Input Range –...

SKU: LB-1147

An enclosed battery holder for three AAA cells with a built-in on/off switch. The snap-on lid keeps batteries secure during use, and the integrated switch lets you toggle power without disconnecting leads. Provides approximately 4.5 V with three alkaline AAA batteries (3 × 1.5 V) or 3.6 V with t...

SKU: PL-1152

An enclosed battery holder for three AA cells with a built-in on/off switch. The snap-on lid slides over the batteries to fully enclose them, keeping the cells secure during use. Provides approximately 4.5 V with three alkaline AA batteries (3 × 1.5 V) or 3.6 V with three NiMH rechargeable cells...

SKU: DF-FIT0619

This battery holder connects 3× AA batteries in series, providing approximately 4.5V from alkaline cells. It features a PH2.0-2P connector with a 15cm wire lead, making it compatible with DFRobot boards and other devices that use the PH2.0 power interface. Key Features 3× AA Series Configurati...

SKU: TB-XC4478

A compact 3-axis accelerometer module based on the ADXL335 sensor IC. Measures acceleration along the X, Y, and Z axes with a range of ±3g, providing one analogue output channel per axis. Useful for detecting motion, impacts, tilt, and orientation. Operates on 3.3–5 V and outputs analogue voltag...

SKU: SF-COM-10953

The MMA8452Q is a low-power, 3-axis capacitive MEMS accelerometer with 12-bit resolution. Packed with embedded motion-detection functions and configurable interrupt outputs, it can monitor events autonomously while staying in a low-power state — reducing the need for the host processor to continu...

SKU: AF-3896

A 3-bladed trifoil propeller designed to snap onto standard DC hobby motors. Great for making simple fans, wind-powered experiments, bubble machines, or lightweight propulsion projects. Key Features Snap-On Fit – Press-fits onto standard DC hobby motor shafts 3-Blade Trifoil Design – Lightwei...

SKU: PI-KEY0105

A straightforward 3-button USB optical mouse with a scroll wheel, suitable for use with Raspberry Pi, desktop computers, and any device with a USB port. The ambidextrous design works for both left- and right-handed users. Key Features 1000 DPI Optical Sensor – Precise tracking with no mouse ba...

SKU: LB-PT-JUMPER-KIT

A pack of 30 male-to-male jumper wires in three colours — 10 red (power), 10 black (ground), and 10 yellow (signal). The colour coding makes it easy to keep breadboard and prototype circuits organised and readable at a glance. Key Features Colour-Coded – Red, black, and yellow for power, groun...