All Products

SKU: AF-3786

These 2-Pin Wire Joints provide a quick, solder-free way to connect two wires together. Simply press the curved arm to open the aperture, insert the wire, and release — the spring mechanism holds the wire securely in place. Compatible with a wide range of wire gauges (16–30 AWG) in both solid an...

SKU: LB-00183

A 10-wire splittable ribbon jumper cable with male (pin) connectors on both ends. Each wire is colour-coded and can be peeled apart individually or in groups to suit your wiring needs. At 300mm (30cm) long, they're a good length for breadboard and prototyping work. Key Features Male-to-Male (M...

SKU: AF-3893

The JST PH 3-Pin to Male Header Cable converts a JST PH 3-pin connector into three individual colour-coded wires, each terminated with a 0.1" (2.54 mm) male header pin. It's ideal for extending sensor or LED connections to a breadboard or development board. At 200 mm long, this cable provides en...

SKU: AF-5297

The Adafruit Monochrome 1.12" OLED Display packs a 128×128 pixel resolution into a compact screen with the high contrast and crisp readability that OLED technology is known for. Each of the 16,384 white pixels is individually addressable, producing sharp text and graphics with no backlight requir...

SKU: SF-WIG-21277 · MPN: WIG-21277

Need more Qwiic ports without forcing every board into a single daisy chain? This star-shaped Qwiic MultiStar acts as a hub for the I2C bus, adding four extra usable Qwiic ports to a board that only has one.The board has five Qwiic connectors in total. One connects back to your main board, leavin...

SKU: AF-801

The Adafruit Prototyping Pi Plate Kit snaps onto your Raspberry Pi and provides a generous prototyping area with all GPIO, I2C, SPI, and power pins broken out to labelled 0.1" strips and 3.5 mm screw-terminal blocks. It's designed for the original Pi Model A/B but also works with any 40-pin Pi (A...

SKU: LB-LS5179-5

A pack of ten 5-pin PCB screw terminal blocks with a 2.54mm (0.1") pitch — the same spacing as standard breadboard headers. Strip a wire, insert it into the terminal, and tighten the screw for a secure, solderless electrical connection that can be disconnected and reconnected as needed. The 2.54...

SKU: TB-HM3173

A 3-way PCB-mount screw terminal block with 5 mm pitch. Solder it to a PCB and connect wires using the screw terminals — ideal for any situation where wires need to leave a circuit board. The interlocking design allows multiple blocks to be combined for larger configurations. Key Features 5 mm...

SKU: AF-371

A 150mm (6″) IDC ribbon cable with 6-pin (2×3) socket connectors on both ends at 0.1″ × 0.1″ (2.54mm) spacing. Commonly used for AVR ISP programming connections and other 2×3 header interfaces. Key Features Socket-to-Socket – 2×3 IDC connectors on both ends Standard 0.1″ Pitch – Compatible wi...

SKU: SF-PRT-11367

A convenient assortment of solid-core hook-up wire in six colours, packaged in a handy cardboard dispenser box. Perfect for breadboarding, prototyping, and general electronics wiring. Each colour comes on its own 25 ft (7.6 m) spool, making it easy to keep your wiring organised and colour-coded ...

SKU: AF-2915

A 3.5 mm (1/8") 4-pole TRRS audio jack with screw terminal connections — no soldering required. Use stranded or solid-core wire and a small screwdriver to create custom audio wiring jigs, breakouts, and test setups. TRRS stands for Tip, Ring, Ring, Sleeve, providing four contacts: three signal l...

SKU: AF-2791

A 3.5 mm (1/8") stereo (TRS) audio jack with screw terminal connections — no soldering required. Use stranded or solid-core wire and a small screwdriver to create custom audio wiring jigs, breakouts, and test setups. This is the most common size and style of audio connector, used in headphones, ...

SKU: AF-2136

A compact 3-pin screw terminal block with 2.54mm (0.1") pitch, designed to fit directly into perfboard and protoboards. Terminal blocks provide reliable, tool-adjustable PCB-to-wire connections that are easy to maintain and reconfigure. The screw terminals accept a range of wire gauges and are t...

SKU: AF-2135

A compact 6-pin screw terminal block with 2.54mm (0.1") pitch, designed to fit directly into perfboard and protoboards. Terminal blocks provide reliable, tool-adjustable PCB-to-wire connections that are easy to maintain and reconfigure. The screw terminals accept a range of wire gauges and are t...

SKU: AF-2137

A compact 4-pin screw terminal block with 2.54mm (0.1") pitch, designed to fit directly into perfboard and protoboards. Terminal blocks provide reliable, tool-adjustable PCB-to-wire connections that are easy to maintain and reconfigure. The screw terminals accept a range of wire gauges and are t...

SKU: AF-2134

A compact 9-pin screw terminal block with 2.54mm (0.1") pitch, designed to fit directly into perfboard and protoboards. Terminal blocks provide reliable, tool-adjustable PCB-to-wire connections that are easy to maintain and reconfigure. The screw terminals accept a range of wire gauges and are t...

SKU: AF-2138

A compact 2-pin screw terminal block with 2.54mm (0.1") pitch, designed to fit directly into perfboard and protoboards. Terminal blocks provide reliable, tool-adjustable PCB-to-wire connections that are easy to maintain and reconfigure. The screw terminals accept a range of wire gauges and are t...

SKU: AF-1411

The Adafruit 16-Channel PWM/Servo Shield brings PCA9685-based servo and PWM control to any Arduino in a convenient shield format. Using only I2C (SCL and SDA), the shield provides 16 channels of 12-bit PWM output with a built-in clock — no continuous signal from your microcontroller needed. Up t...

SKU: LB-00051

This single-pin crimp connector housing lets you quickly build custom cables that mate with standard 0.1" (2.54mm) spaced connectors. Pair it with pre-crimped terminal wires or crimp pins to create reliable, removable connections. Compatible with male and female headers, solderless breadboards, ...

SKU: AF-2139

A compact 5-pin screw terminal block with 2.54mm (0.1") pitch, designed to fit directly into perfboard and protoboards. Terminal blocks provide reliable, tool-adjustable PCB-to-wire connections that are easy to maintain and reconfigure. The screw terminals accept a range of wire gauges and are t...