All Products
Showing 41-60 of 71 products
Adafruit 0.54 Quad Alphanumeric FeatherWing Display - Blue
·
The Adafruit 0.54" Quad Alphanumeric FeatherWing Display in blue adds a bright, 4-character 14-segment LED display to any Feather board. Each character can display letters, numbers, and symbols, making it ideal for clocks, status indicators, sensor readouts, and more. Driven by the HT16K33 I2C m...
Adafruit 0.54 Quad Alphanumeric FeatherWing Display - Green
·
The Adafruit 0.54" Quad Alphanumeric FeatherWing Display in green adds a bright, 4-character 14-segment LED display to any Feather board. Each character can display letters, numbers, and symbols, making it ideal for clocks, status indicators, sensor readouts, and more. Driven by the HT16K33 I2C ...
Adafruit 0.54 Quad Alphanumeric FeatherWing Display - Red
·
The Adafruit 0.54" Quad Alphanumeric FeatherWing Display in red adds a bright, 4-character 14-segment LED display to any Feather board. Each character can display letters, numbers, and symbols, making it ideal for clocks, status indicators, sensor readouts, and more. Driven by the HT16K33 I2C ma...
Adafruit 15x7 CharliePlex LED Matrix Display FeatherWing - Red
·
The Adafruit 15×7 CharliePlex LED Matrix FeatherWing in Red adds a bright, compact 105-LED grid to any Feather board. The onboard IS31FL3731 driver handles all the charlieplexing over I2C, with 8-bit (256-level) PWM dimming on every individual LED — no complex wiring needed. The driver chip incl...
Adafruit 15x7 CharliePlex LED Matrix Display FeatherWing - Yellow
·
The Adafruit 15×7 CharliePlex LED Matrix FeatherWing in Yellow adds a bright, compact 105-LED grid to any Feather board. The onboard IS31FL3731 driver handles all the charlieplexing over I2C, with 8-bit (256-level) PWM dimming on every individual LED — no complex wiring needed. The driver chip i...
Adafruit 15x7 CharliePlex LED Matrix Display FeatherWing - Green
·
The Adafruit 15×7 CharliePlex LED Matrix FeatherWing in Green adds a bright, compact 105-LED grid to any Feather board. The onboard IS31FL3731 driver handles all the charlieplexing over I2C, with 8-bit (256-level) PWM dimming on every individual LED — no complex wiring needed. The driver chip in...
Adafruit 15x7 CharliePlex LED Matrix Display FeatherWing - Blue
·
The Adafruit 15×7 CharliePlex LED Matrix FeatherWing in Blue adds a bright, compact 105-LED grid to any Feather board. The onboard IS31FL3731 driver handles all the charlieplexing over I2C, with 8-bit (256-level) PWM dimming on every individual LED — no complex wiring needed. The driver chip inc...
Adafruit Prop-Maker FeatherWing
·
The Adafruit Prop-Maker FeatherWing is an all-in-one add-on for building light sabers, cosplay props, interactive toys, and wearable effects. It combines NeoPixel LED driving, a 3W RGB LED driver, a motion-sensing accelerometer, and a Class D audio amplifier onto a single Feather-format board — e...
Assembled Adafruit Prop-Maker FeatherWing
The Adafruit Feather series gives you lots of options for a small, portable, rechargeable microcontroller board. Perfect for fitting into your next prop build! This FeatherWing will unlock the prop-maker inside all of us, with tons of stuff packed in to make sabers & swords, props, toys, cosplay ...
Adafruit AirLift FeatherWing – ESP32 WiFi Co-Processor
·
Give your Feather project WiFi connectivity with the Adafruit AirLift FeatherWing. This add-on uses an ESP32 as a WiFi co-processor, handling all the heavy lifting of network connections and TLS/SSL encryption so your main Feather can focus on your application logic. The ESP32 communicates over ...
Simple Spring Antenna - 915MHz
·
This simple spring antenna matches great with any of our 900MHz RFM and LoRa breakouts, bonnets and Feathers. They're made of copper-clad wire so you can solder them easily.They are compact, only 17.5mm/0.68" long, and have 2.15dBi of gain and 50Ω impedance, so it will work fantastically with jus...
Assembled DC Motor + Stepper FeatherWing Add-on
·
A Feather board without ambition is a Feather board without FeatherWings! This is the Fully assembled (with headers) DC Motor + Stepper FeatherWing which will let you use 2 x bi-polar stepper motors or 4 x brushed DC motors (or 1 stepper and 2 DC motors). Using our Feather Stacking Headers or Fea...
Assembled Adafruit Feather M0 WiFi - ATSAMD21 + ATWINC1500
·
The Adafruit Feather M0 WiFi combines an ATSAMD21G18 ARM Cortex M0+ processor with an ATWINC1500 WiFi module for an all-in-one Arduino-compatible development board with built-in USB, battery charging, and 802.11b/g/n connectivity. This version comes fully assembled with headers soldered. The FCC...
Micro SD Card PCB Extender
·
Stop fiddling with micro SD card sockets in the back of your latest gadget during development, and give yourself a little more elbow room with this Small Micro SD Card Extender. This is a great hack for length constraints with 3D printers, single-board computers, data-logging kits and more. Get t...
Adafruit MIDI FeatherWing Kit
·
The Adafruit MIDI FeatherWing Kit adds MIDI input and output to any compatible Feather board. Featuring both DIN-5 MIDI jacks, a 3.3V optical isolator for safe MIDI input, and indicator LEDs for transmit/receive activity, this FeatherWing makes it easy to build MIDI controllers, synthesisers, and...
Adafruit 2.9 Tri-Color eInk / ePaper Display FeatherWing - Red Black White
·
Add a vibrant tri-colour eInk display to your Feather project with this 2.9" FeatherWing. The panel displays red, black, and white pixels at 296×128 resolution that remain visible even with power completely disconnected — just like printed paper, but with the added impact of colour. The FeatherW...
Adafruit 2.13 HD Tri-Color eInk / ePaper Display FeatherWing - 250x122 RW Panel with SSD1680
·
The Adafruit 2.13" HD Tri-Colour eInk FeatherWing brings electronic paper technology directly to your Feather board. Featuring a 250×122 pixel display with black, red, and white ink, this FeatherWing delivers high-contrast, daylight-readable visuals that persist even when power is completely disc...
Simple Spring Antenna - 433MHz
·
This simple spring antenna matches great with any of our 433MHz RFM and LoRa breakouts, bonnets and Feathers. They're made of copper-clad wire so you can solder them easily.They are compact, only ~38mm / 1.5" long, and have 2.5dBi of gain and 50Ω impedance, so it will work fantasticall...
Pink and Purple Woven USB A to USB C Cable - 2 meters long
·
This cable is not only super-fashionable, with a woven pink and purple Blinka-like pattern, it's also made for USB C for our modernized breakout boards, Feathers and more. If you want something just like it but for Micro B, we have a B version here.First, let's talk about the cover and over...
Adafruit Feather RP2040 with DVI Output Port - Works with HDMI
The Feather RP2040 with DVI Output lets you drive an HDMI monitor or television directly from a microcontroller. The on-board HDMI connector outputs digital video (DVI) at 640×480 or 800×480 resolution using the RP2040's PIO peripherals, with an internal framebuffer of 320×240 or 400×240 pixels t...
