All Products
Showing 41-60 of 100 products
Air Pump and Vacuum DC Motor - 4.5V and 1.8 LPM - ZR320-02PM
·
A compact DC-powered air pump for inflatables and air-powered projects. Power it with ~4.5V (5V works fine) and it draws about 600mA, making it easy to run from the same supply as your DC motors or servos. The pump sucks air in from the side of the casing and pushes it out the tubing port. Contr...
2x2A DC Motor Shield For Arduino
The DFRobot 2×2A DC Motor Shield uses the L298P dual full-bridge driver chip to control two DC motors at up to 2 A per channel. It stacks directly onto Arduino Uno and Arduino Mega boards, using PWM pins 5 and 6 for speed control and digital pins 4 and 7 for enable/disable. The shield can be pow...
Adafruit S-35710 Low-Power Wake Up Timer Breakout
·
The Adafruit S-35710 Wake Up Timer Breakout is an ultra-low-power watchdog timer that can be programmed to trigger an alarm from 1 second up to 194 days, using a 24-bit second counter. Drawing only 0.2 µA, it's an interesting alternative to a real-time clock for projects that need a separate, ind...
Adafruit bq25185 USB / DC / Solar Lithium Ion/Polymer charger
·
The Adafruit bq25185 Charger is a versatile LiPo/LiIon/LiFePO4 charging board that supports USB, DC, and solar power input. It is an excellent upgrade from MCP73833 or MCP73831-based chargers, offering multi-chemistry support, adjustable charge rates, smart power path management, and near-MPPT so...
ESP32-C6-DevKitM-1 Development Board (4 MB SPI Flash)
·
The ESP32-C6-DevKitM-1 is an entry-level development board built around the ESP32-C6-MINI-1 module, featuring a RISC-V 32-bit single-core processor running at up to 160 MHz. It integrates Wi-Fi 6 (2.4 GHz), Bluetooth 5 (LE), Zigbee 3.0, and Thread 1.3 — making it one of the most connectivity-rich...
APA102 5050 RGB LED w/ Integrated Driver Chip - 10 Pack [APA102C]
·
These APA102C (DotStar) RGB LEDs feature an integrated driver chip inside each 5050 SMD package, giving you individually addressable 24-bit colour control (8 bits each for red, green, and blue). The same smart LED used in DotStar LED strips, now available as individual components for custom desig...
APA102 5050 Warm White LED w/ Integrated Driver Chip - 10 Pack [~3000K]
·
These APA102 (DotStar) warm white LEDs feature an integrated driver chip inside each 5050 SMD package, giving you individually addressable brightness control over three warm white (~3000K) dies. The phosphor coating produces a consistent, diffused warm light that looks far better than mixing RGB ...
APA102 5050 Cool White LED w/ Integrated Driver Chip - 10 Pack [~6000K]
·
These APA102 (DotStar) cool white LEDs feature an integrated driver chip inside each 5050 SMD package, giving you individually addressable brightness control over three cool white (~6000K) dies. The phosphor coating produces a consistent, diffused white light that looks far better than mixing RGB...
NeoPixel RGBW LEDs w/ Integrated Driver Chip - Natural White [~4500K - Black Casing - 10 Pack]
·
What is better than smart RGB LEDs? Smart RGB+White LEDs! These NeoPixels now have 4 LEDs in them (red, green, blue and white) for excellent lighting effects. Make your own smart RGBW LED arrangement with the same integrated LED driver that is used in our NeoPixel LED strips. This is the RGB +...
NeoPixel RGBW LEDs w/ Integrated Driver Chip - Natural White [~4500K - White Casing - 10 Pack]
·
What is better than smart RGB LEDs? Smart RGB+White LEDs! These NeoPixels now have 4 LEDs in them (red, green, blue and white) for excellent lighting effects. Make your own smart RGBW LED arrangement with the same integrated LED driver that is used in our NeoPixel LED strips. This is the RGB +...
NeoPixel RGBW LEDs w/ Integrated Driver Chip - Warm White [~3000K - White Casing - 10 Pack]
·
What is better than smart RGB LEDs? Smart RGB+White LEDs! These NeoPixels now have 4 LEDs in them (red, green, blue and white) for excellent lighting effects. Make your own smart RGBW LED arrangement with the same integrated LED driver that is used in our NeoPixel LED strips. This is the RG...
NeoPixel RGBW LEDs w/ Integrated Driver Chip - Cool White [~6000K - White Casing - 10 Pack]
·
What is better than smart RGB LEDs? Smart RGB+White LEDs! These NeoPixels now have 4 LEDs in them (red, green, blue and white) for excellent lighting effects. Make your own smart RGBW LED arrangement with the same integrated LED driver that is used in our NeoPixel LED strips. This is the RGB +...
Re-programmable USB Type-C PD to 2.1/5.5mm Barrel Jack Cable
·
A re-programmable USB Type-C Power Delivery (PD) cable that converts any PD-capable USB-C power adapter into a configurable DC barrel jack output. Programme the built-in PD sink negotiation chip to request 5 V, 7 V, 9 V, 10 V, 12 V, 15 V, or 20 V at up to 2 A — replacing the need for multiple wal...
SPI Flash Breakout - W25Q16 16Mbit / 2MB
·
When an SD card is overkill, this small board gives your microcontroller project a handy chunk of non-volatile storage for files, images, fonts, audio clips and other data. It uses a W25Q16 flash chip, providing 16 Mbit / 2 MByte of external memory with lower cost and power usage than a full SD c...
SparkFun RFID USB Reader
The SparkFun RFID USB Reader is a simple to use, USB to serial base unit for the ID-3LA, ID-12LA, and ID-20LA readers. Simply plug a reader into the headers and attach a miniUSB cable. Open a terminal program of your choice at 9600bps 8N1, then scan your 125kHz ID tag and the unique 32-bit ID wil...
SparkFun RFID Starter Kit
This it the SparkFun RFID Starter Kit, an all-in-one kit that offer everything you need to get your next RFID project off the ground. This kit includes our USB RFID Reader, ID-12LA RFID module, and two 125kHz RFID cards. We’ve done away with the annoying clamshell and now offer this in the same t...
Adafruit NeoTrellis RGB Driver PCB for 4x4 Keypad
·
Upgrade your button-pad projects with full-colour NeoPixel backlighting. The NeoTrellis RGB Driver PCB is a 4×4 keypad controller with 16 NeoPixels and an onboard seesaw I2C chip that handles both button scanning and LED driving — all over plain I2C, no NeoPixel pin management required. The boar...
ESP32-C3-WROOM-02-N4 Module (PCB antenna)
ESP32-C3-WROOM-02 is a universal Wi-Fi and low-power Bluetooth LE module. The rich set of peripherals and small size make the two modules an ideal choice for smart homes, industrial automation, health care, consumer electronics, etc. ESP32-C3-WROOM-02-N4 is equipped with ESP32-C3* chip and equipp...
Indoor ENS160 Air Quality Sensor - I2C
The ENS160 Air Quality Sensor uses ScioSense's ENS160 chip with TrueVOC and metal oxide (MOX) technology to monitor indoor air quality. It outputs TVOC (total volatile organic compounds), eCO2 (equivalent CO2), and AQI (air quality index) readings via I2C, with intelligent on-chip algorithms that...
ESP32-C6-DevKitC-1-N8 - 8MB SPI Flash
The ESP32-C6-DevKitC-1-N8 is an entry-level development board equipped with ESP32-C6-WROOM-1, a general-purpose Wi-Fi + Bluetooth LE RISC-V MCU module that integrates complete Wi-Fi and Bluetooth LE functions. This board integrates complete Wi-Fi, Bluetooth LE, Zigbee, and Thread functions....