All Products
Showing 5581-5600 of 11178 products
Jumper Wire - 0.1, 2-pin, 12
Jumper Wire - 0.1, 2-pin, 4
Jumper Wire - 0.1, 2-pin, 6
Jumper Wire - 0.1, 3-pin, 12
Jumper Wire - 0.1, 3-pin, 4
Jumper Wire - 0.1, 3-pin, 6
Jumper Wire - 0.1, 3-pin, 6 (Black, Red, White)
Jumper Wire - 0.1, 4-pin, 12
Jumper Wire - 0.1, 4-pin, 4
Jumper Wire - 0.1, 4-pin, 6
Jumper Wire - 0.1, 5-pin, 12
Jumper Wire - 0.1, 5-pin, 4
Jumper Wire - 0.1, 5-pin, 6
Jumper Wire - 0.1, 6-pin, 12
Jumper Wire - 0.1, 6-pin, 4
Jumper Wire - 0.1, 6-pin, 6
Jumper Wire - 0.1(housing pin not included)
Jumper Wire - Female to Female Connector
Jumper Wire - JST Black Blue
Jumper Wire - JST Black Red
Jumper Wire - 0.1, 2-pin, 12
This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers. Dimensions: 12" length Documents: Drawing
Jumper Wire - 0.1, 2-pin, 4
This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers. Dimensions: 4" length Documents: Drawing
Jumper Wire - 0.1, 2-pin, 6
This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers. Dimensions: 6" length Documents: Drawing
Jumper Wire - 0.1, 3-pin, 12
This is a simple three wire cable. Great for jumping from board to board or just about anything else. There is a 3-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.
Jumper Wire - 0.1, 3-pin, 4
This is a simple three wire cable. Great for jumping from board to board or just about anything else. There is a 3-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers. Dimensions: 4" length Documents: Drawing
Jumper Wire - 0.1, 3-pin, 6
A simple 3-pin jumper wire with JST RE connectors on both ends, designed for standard 0.1" (2.54 mm) breakaway headers. Ideal for board-to-board connections, sensor hookups, and general prototyping. Specifications Pins – 3 Connector – JST RE on both ends Pitch – 0.1" (2.54 mm) Length – 6 in...
Jumper Wire - 0.1, 3-pin, 6 (Black, Red, White)
This is a simple three wire cable. Each cable is 6" long and is great for jumping from board to board or just about anything else. There is a 3-pin JST connector with 0.1" spacing on both ends. These jumper wires come with black, red, and white cables. Dimensions: 6" length
Jumper Wire - 0.1, 4-pin, 12
A simple 4-pin jumper wire cable with JST RE connectors on both ends. Great for jumping between boards or connecting to standard 0.1" (2.54 mm) breakaway headers. Specifications Pins – 4 Pitch – 0.1" (2.54 mm) Length – 12" (30 cm) Connectors – 4-pin JST RE on both ends Package Contents 1...
Jumper Wire - 0.1, 4-pin, 4
This is a simple four wire cable. Great for jumping from board to board or just about anything else. There is a 4-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers. Dimensions: 4" length Documents: Drawing
Jumper Wire - 0.1, 4-pin, 6
A 6" (15 cm) four-wire jumper cable with 4-pin JST RE connectors on both ends, designed for board-to-board connections on standard 0.1" (2.54 mm) pitch headers. Specifications Wires – 4 Connector – 4-pin JST RE on both ends Pitch – 0.1" (2.54 mm) Length – 6" (15 cm) Ideal For Board-to-bo...
Jumper Wire - 0.1, 5-pin, 12
This is a simple five wire cable. Great for jumping from board to board or just about anything else. There is a 5-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers. Dimensions: 12" length Documents: Drawing
Jumper Wire - 0.1, 5-pin, 4
This is a simple five wire cable. Great for jumping from board to board or just about anything else. There is a 5-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers. Dimensions: 4" length Documents: Drawing
Jumper Wire - 0.1, 5-pin, 6
This is a simple five wire cable. Great for jumping from board to board or just about anything else. There is a 5-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 6" lengthDocuments:Drawing
Jumper Wire - 0.1, 6-pin, 12
This is a simple six wire cable. Great for jumping from board to board or just about anything else. There is a 6-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers. Dimensions: 12" length Documents: Drawing
Jumper Wire - 0.1, 6-pin, 4
A simple 6-pin jumper wire cable with JST RE connectors on both ends. Perfect for board-to-board connections using standard 0.1" (2.54mm) breakaway headers. At 4" (100mm) long, it keeps wiring tidy in compact builds. Specifications Connector – 6-pin JST RE on both ends Pitch – 0.1" (2.54mm) ...
Jumper Wire - 0.1, 6-pin, 6
This is a simple six wire cable. Great for jumping from board to board or just about anything else. There is a 6-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers. Dimensions: 6" length Documents: Drawing
Jumper Wire - 0.1(housing pin not included)
A 300 mm (12") ribbon cable made of ten colour-coded jumper wires, each with female headers already attached at both ends. The wires can easily be pulled apart for individual use, making them versatile for breadboard and prototyping work. Key Features 10 Colour-Coded Wires – Easy identificatio...
Jumper Wire - Female to Female Connector
This is a simple two wire cable. Both ends have a 2-pin 0.1" pitch female connector. Dimensions: 130mm length
Jumper Wire - JST Black Blue
This is a simple two wire cable. Great for jumping from board to board. 2-pin JST connector on one end, bare cable on the opposite end. Dimensions: 100mm length Documents: JST connector
Jumper Wire - JST Black Red
This is a simple two wire cable. Great for jumping from board to board. 2-pin JST connector on one end, bare cable on the opposite end. Dimensions: 130mm length Documents: JST connector
