All Products
Showing 21-40 of 41 products
2x3A DC Motor Driver Carrier Board for UNIHIKER M10
·
This DFRobot motor driver carrier board is purpose-built for the UNIHIKER M10, featuring a tilted edge connector slot that positions the screen at an optimal viewing angle. It integrates a dual 3 A DC motor driver with separate motor power, plus onboard RGB LEDs and infrared transmitter/receiver....
Raspberry Pi Pico Entry-Level Sensor Kit Board
Raspberry Pi Pico Entry-Level Sensor Kit Including 15 Common Modules Such As LED, Button, Buzzer, Etc.Out Of The Box As A Whole Kit, Or Can Be Separated To Use Independently Comes With Online Development Resources And Manual Features At A Glance Standard Raspberry Pi Pico header, supports Raspber...
Sparki Robot - the easy robot for everyone
Sparki is a fully assembled, Arduino-compatible robot designed for learning programming, electronics, and robotics. Based on the Arduino Leonardo, it comes packed with sensors, motors, a display, and wireless connectivity — ready to use out of the box with no assembly required. Key Features Ar...
IR Sensor Module
An infrared receiver module that can read signals from most standard IR remote controls. Useful for adding remote control functionality to Arduino and microcontroller projects. Pair with an IR transmitter module to build a universal remote control system. Key Features IR Signal Reception – Rea...
940nm IR Infrared and Receiver LED
A matched pair of 5mm infrared LEDs — one transmitter (clear) and one receiver (black) — operating at 940nm. Use them to build object sensors, colour sensors, line sensors, distance sensors, and custom wheel encoders. Specifications Size – 5mm Lead Length – 37mm Wavelength – 940nm (infrared)...
Vishay TSOP34156 IR Receiver Module, 56kHz
The Vishay TSOP34156 is a general-purpose modulated IR receiver for IR-based remote-control projects. It features a wide operating voltage range and allows for relatively high data rates; this particular unit is tuned for a 56 kHz carrier frequency. This is the IR receiver used in the Polo...
Trace Unit (For Lidar Bot/Bala)
Description TRACE is mainly consist of 4 sets of IR, 1x infrared emitting and 1x infrared receiver for each set. The infrared LEDs should be placed towards and close to the ground where having black tracing lines and white background (or vice versa) layouts. The IR transmitter keep emitti...
180° Infrared Refletive Unit (ITR9606)
The OP.180 is an infrared reflective limit switch unit built around the ITR9606 sensor, which pairs an infrared emitting diode with a silicon phototransistor in a 180° (straight-through) orientation. When an object passes between the emitter and receiver, the IR beam is broken, triggering a digit...
Yahboom Roboduino Uno R3 smart robot compatible with Arduino
The Yahboom Roboduino is a smart robot car kit built around a custom driver expansion board compatible with Arduino Uno R3. Packed with sensors and modules — including ultrasonic ranging, line tracking, IR control, and a Wi-Fi camera — it provides a hands-on introduction to electronics, programmi...
IR Break Beam Sensor (50cm)
An infrared break-beam sensor pair for simple, reliable motion detection. The emitter sends a beam of invisible IR light to the receiver — when an object passes between them and breaks the beam, the receiver outputs a signal. Works up to 50 cm at 5 V with a fast response time under 2 ms. The com...
5V IR Photoelectric Switch (4m)
This IR break-beam photoelectric switch detects objects by sending an invisible infrared beam from an emitter to a receiver. When a non-transparent object passes between the two and breaks the beam, the receiver outputs a signal. It works over distances up to 4 metres with a fast 0.5ms response t...
Photo Interrupter - GP1A57HRJ00F
The GP1A57HRJ00F is a slotted optical sensor (photo interrupter) with an infrared emitter on one upright and a shielded infrared detector on the other. When an object passes through the 10 mm gap between the uprights, it breaks the IR beam and the detector registers the interruption. Key Feature...
Vishay TSSP58P38 IR Detector Module, 38kHz, Automatic Gain (3-Pack)
The Vishay TSSP58P38 is a unique modulated IR receiver that is designed for IR brightness detection instead of data communication for remote control. This sensor can be used with a 38 kHz modulated IR emitter and the appropriate algorithms to form a distance sensor with a range of up to a f...
Gravity:Digital IR Receiver Module
Infrared devices are widely used, and often for remote controlled devices. With this IR receiver, your Arduino project is now able to receive command from any IR remote controller. Well, it will be also easy to make your own IR controller using IR transmitter. SPECIFICATIONS ...
IR Break Beam Sensor - 3mm LEDs
·
Infrared (IR) break-beam sensors are a simple way to detect motion. They work by having an emitter side that sends out a beam of human-invisible IR light, then a receiver across the way which is sensitive to that same light. When something passes between the two, and its not transparent to ...
IR Break Beam Sensor - 5mm LEDs
·
Infrared (IR) break-beam sensors are a simple way to detect motion. They work by having an emitter side that sends out a beam of human-invisible IR light, then a receiver across the way which is sensitive to that same light. When something passes between the two, and its not transparent to IR,...
Arduino Infrared Remote Control IOT Smart IR Module
The Smart IR Module is a compact infrared transceiver board designed for IoT remote control projects. With four IR transmitters arranged for 360° coverage and an integrated IR receiver, it allows you to learn remote control codes from existing devices and then retransmit them — turning your micro...
IRduino
An open source, programmable, Arduino-compatible USB infrared receiver that gives new life to old remote controls. IRduino is a peripheral device that allows almost any IR signal to be translated into commands. It works on many platforms, including PC, Mac, Raspberry Pi, and even some cell pho...
Gravity:DIGITAL IR Transmitter Module
An infrared transmitter is simply a Light Emitting Diode which generates IR light (invisible IR light)--light with a wavelength of between 1 mm and 750 nanometers, and some associated circuitry. In an infrared remote control, for example, pushing a button sends an electric signal to the LE...
IR Receiver Module for Arduino
This infra-red receiver module is perfect for Arduino projects. It has a wide range of applications, including remote control, wireless data transmission, etc.
