All Products
Showing 21-40 of 47 products
USB Li-Ion Power Bank with 2 x 5V Outputs @ 2.1A - 5000mAh
·
Here's a hand-held-size rechargeable battery pack for your Raspberry Pi (or Metro, or anything else that uses 5V!). This pack is intended for providing a lot of power to a smartphone, tablet, etc, but we found it does a really good job of powering other miniature computers and micro-controller...
Adafruit 16-Channel 12-bit PWM/Servo Shield - I2C interface
·
The Adafruit 16-Channel PWM/Servo Shield brings PCA9685-based servo and PWM control to any Arduino in a convenient shield format. Using only I2C (SCL and SDA), the shield provides 16 channels of 12-bit PWM output with a built-in clock — no continuous signal from your microcontroller needed. Up t...
Adafruit ItsyBitsy M4 Express featuring ATSAMD51
·
The Adafruit ItsyBitsy M4 Express is a high-performance microcontroller board powered by the ATSAMD51 Cortex M4 running at 120 MHz with hardware floating point and DSP support. Packed into a tiny 1.4" × 0.7" form factor, it delivers 512 KB Flash, 192 KB RAM, and 2 MB of SPI Flash for CircuitPytho...
Adafruit AirLift Shield - ESP32 WiFi Co-Processor
·
Give your Arduino project WiFi connectivity with the Adafruit AirLift Shield. This shield uses an ESP32 as a WiFi co-processor, handling all the heavy lifting of network connections and TLS/SSL encryption so your main microcontroller can focus on your application logic. The ESP32 communicates ov...
Monochrome 2.42 128x64 OLED Graphic Display Module Kit
·
If you've been diggin' our monochrome OLEDs but need something bigger, this display will delight you! These displays are 2.42" diagonal, and very readable due to the high contrast of an OLED display. This display is made of 128x64 individual white OLED pixels, each one turned on or off by the ...
Adafruit METRO M0 Express - designed for CircuitPython [ATSAMD21G18]
·
The Adafruit Metro M0 Express brings 32-bit ARM power to the familiar Metro/UNO shield-compatible form factor. Powered by the ATSAMD21G18 ARM Cortex M0+ processor at 48 MHz, it offers 256 KB flash and 32 KB RAM — a massive upgrade over the ATmega328-based Metro. Designed from the ground up for Ci...
Adafruit Metro M4 Express AirLift (WiFi) - Lite
·
The Adafruit Metro M4 Express AirLift combines the powerful ATSAMD51J19 ARM Cortex M4 processor with an on-board ESP32 WiFi co-processor — all in the standard Metro/UNO shield-compatible form factor. With 120 MHz clock speed, floating point support, and built-in TLS/SSL for secure connections, th...
Adafruit Metro ESP32-S2
·
The Adafruit Metro ESP32-S2 combines the popular Arduino UNO shield-compatible Metro form factor with the ESP32-S2 WiFi module. Featuring native USB, 4 MB flash, and 8 MB PSRAM, this board is ideal for WiFi-connected projects using CircuitPython or Arduino — and can even act as a USB keyboard, mo...
Adafruit Metro M7 with AirLift - Featuring NXP iMX RT1011
The Adafruit Metro M7 with AirLift is the fastest Metro board yet, powered by the NXP iMX RT1011 ARM Cortex M7 processor running at 500 MHz. Combined with an on-board ESP32 AirLift WiFi co-processor, 4 MB of QSPI flash, and the standard Metro/UNO shield-compatible form factor, this board delivers...
Adafruit Metro ESP32-S3 with 16 MB Flash 8 MB PSRAM
The Adafruit Metro ESP32-S3 brings the powerful dual-core ESP32-S3 to the familiar Metro/UNO shield-compatible form factor. With 16 MB flash, 8 MB PSRAM, and 512 KB SRAM, this board has the memory to handle demanding CircuitPython, Arduino, or ESP-IDF projects with WiFi and Bluetooth LE connectiv...
Adafruit Metro RP2040
The Adafruit Metro RP2040 brings the Raspberry Pi RP2040 dual-core processor to the standard Metro/UNO shield-compatible form factor. With 16 MB of QSPI flash, a microSD card slot, USB-C, and a rich set of debugging ports, this board is an excellent platform for CircuitPython, Arduino, MicroPytho...
Adafruit Metro M7 with microSD - Featuring NXP iMX RT1011
The Adafruit Metro M7 with microSD is powered by the NXP iMX RT1011 ARM Cortex M7 processor running at 500 MHz — the fastest Metro board available. With 8 MB of QSPI flash, 128 KB SRAM, a built-in microSD card slot, and the standard Metro/UNO shield-compatible form factor, this board delivers exc...
Adafruit Metro RP2350
·
The Adafruit Metro RP2350 brings the next-generation Raspberry Pi RP2350 dual-core processor to the standard Metro/UNO shield-compatible form factor. With dual ARM Cortex-M33 cores running at 150 MHz, 528 KB SRAM, 16 MB of QSPI flash, and a microSD card slot, this board is a powerful step up from...
Clear Enclosure for Arduino or Metro
·
This simple but effective enclosure will fit any 'classic Arduino' shaped development board - we've tested it for sure with the Arduino UNO R3, Adafruit Metro and Adafruit Metro Express. It's clear so you can see all your onboard LEDs and silkscreen labels. There are four small screws you ca...
DIN Rail Mount Bracket for Raspberry Pi / BeagleBone / Arduino
·
An aluminium mounting bracket for installing microcontrollers and single-board computers onto standard DIN rail. Ideal for simplifying wiring in control panels, enclosures, and industrial-style builds. No soldering required — simply mount your board using the included M2.5 standoffs. Compatibili...
Piunora Lite Carrier for Raspberry Pi 4 Module by Diodes Delight
·
Piunora by Diode Delights is a compact, easy-to-use development board for electronics prototyping with Linux. It has a familiar form factor, legible pin labels, and a design that’s well suited to space-constrained applications.As a carrier board for the Raspberry Pi Compute Module 4 (CM4), Piuno...
Adafruit ItsyBitsy M0 Express - for CircuitPython Arduino IDE
·
The Adafruit ItsyBitsy M0 Express is a compact yet powerful microcontroller board built on the ATSAMD21 Cortex M0+ running at 48 MHz. At just 1.4" × 0.7", it delivers the same capability as the Metro M0 or Feather M0 Express in a fraction of the size — perfect for shrinking prototypes into final ...
Adafruit NeoPXL8 Friend - 8 x Strands NeoPixel Level Shifter
·
Drive up to 8 strands of NeoPixels simultaneously with DMA — no more blocking your code to push pixel data. The NeoPXL8 Friend is a standalone level-shifting breakout board that converts 3.3 V logic to 5 V for 8 independent NeoPixel outputs, with a breadboard-friendly form factor that works with ...
Adafruit ST25DV16K I2C RFID EEPROM Breakout - STEMMA QT / Qwiic
·
The Adafruit ST25DV16K is a unique I2C-programmable RFID EEPROM breakout that works with mobile phones as an ISO/IEC 15693 (13.56 MHz) NFC tag, but can be dynamically rewritten over I2C by a microcontroller. This makes it ideal for projects where you need to change tag content on the fly — for ex...
Adafruit Qwiic / Stemma QT Breakout Board
·
The Adafruit Qwiic / STEMMA QT Breakout Board bridges the gap between the STEMMA QT / Qwiic connector world and standard 0.1" breadboard pins. One end has a JST SH-compatible connector for plug-and-play I2C, and the other has four 0.1" spaced pads for soldering headers or wires to a breadboard. ...