All Products

SKU: AF-2024

The Adafruit Capacitive Touch Shield brings 12 channels of capacitive touch sensing to any Arduino using the MPR121 chip. Each sensor has a "figure 8" pad with holes designed for quick alligator clip connections — attach one end to the shield and the other to any conductive object like metal, fru...

SKU: LB-LR0214-47

This is a touch sensor for Arduino.   This sensor is a toggle output type: touch-on then touch-off. Onboard TTP223 touch capacitive touch sensor IC.  With an on-board-level status indicator. Working voltage: 2.0V-5.5V PCB board size: 29 (mm) x16 (mm)

SKU: DF-DFR0129

A capacitive touch sensor kit for Arduino based on the MPR121 touch controller. Includes three interchangeable touch pads — a scroll wheel, a keypad with backlight support, and a grid pad for gesture and pattern recognition. The MPR121 provides sensitive capacitive detection over an I²C interface...

SKU: AF-1602

Add lots of touch sensors to your next microcontroller project with this easy-to-use 8-channel capacitive touch sensor breakout board, starring the CAP1188. This chip can handle up to 8 individual touch pads, and has a very nice feature that makes it stand out for us: it will light up the 8 onboa...

SKU: M5-A047

The PIANO is an acrylic piano keyboard base for M5Stack Core modules, designed for music and sound projects. It features two TS20 capacitive touch sensor ICs that communicate with the M5 Core via I2C, along with RGB LEDs for visual feedback as you play. Key Features Capacitive Touch Keys – Two...

SKU: AF-4600

The Adafruit QT Py SAMD21 is the original QT Py — a tiny development board built around the ATSAMD21E18 (ARM Cortex-M0+ at 48 MHz) with native USB, a STEMMA QT connector, and an RGB NeoPixel. It's the same chip found in the popular Trinket M0 and GEMMA M0, now in a Seeed Xiao-compatible form fact...

SKU: AF-1982

The Adafruit MPR121 Capacitive Touch Sensor Breakout provides 12 channels of capacitive touch sensing over I2C. The MPR121 handles all the capacitive filtering internally and can be configured for varying sensitivity levels, making it far easier to use than raw analog capacitive sensing. With fo...

SKU: AF-1947

The 2.8" TFT Touch Shield with Capacitive Touch plugs directly into an Arduino and provides a bright, full-colour display with a smooth glass capacitive touchscreen and onboard MicroSD card socket. Fully assembled and ready to use — no wiring or soldering required. This shield uses SPI for the d...

SKU: SF-WRL-19177

The SparkFun IoT RedBoard is an ESP32 Development Board that includes everything but the kitchen sink! Espressif's ESP32 WROOM is a powerful WiFi and Bluetooth® MCU module that targets a wide variety of applications. At the core of this module is the ESP32-D0WDQ6 chip which is designed to be b...

SKU: SF-WRL-24243 · MPN: WRL-24243

It's time to supercharge your next project with the SparkFun RA6M5 Thing Plus! Clocking in at 200MHz, the RA6M5 is a high-performance microcontroller from Renesas that is perfect for real-time applications. This translates to smooth responsiveness, lightning-fast data processing, and the ability ...

SKU: AF-5022

The Adafruit Proximity Trinkey is a tiny USB-A development board built around the APDS9960 multi-function sensor and an ATSAMD21 microcontroller. Plug it into any USB port and you instantly have proximity, colour, ambient light, and gesture sensing — plus two NeoPixel LEDs and two capacitive touc...

SKU: EF-EF04011

The Octopus Touch PAD Sensor is a capacitive touch module based on the TTP223-BA6 IC. It detects touch through dielectric materials such as glass, ceramic, and plastic, making it suitable for touch-through-panel applications. The module connects via a 3-pin Octopus connector for plug-and-play use...

SKU: WS-22059

An all-in-one capacitive fingerprint sensor module with a built-in Cortex processor and commercial-grade fingerprint algorithm. Simply send UART commands to enrol, match, and manage fingerprints — no knowledge of fingerprint algorithms required. The compact rectangle form factor integrates the pr...

SKU: DF-DFR0030

A digital capacitive touch sensor from DFRobot's Gravity series. It detects touch through the same capacitive sensing technology used in smartphones — even through thin cloth or paper. The sensor outputs a digital high/low signal, making it a simple drop-in replacement for mechanical buttons in A...

SKU: AF-1374

This breakout board is the simplest way to create a project with a single "momentary" capacitive touch sensor. No microcontroller is required here - just power with 1.8 to 5.5VDC and touch the pad to activate the sensor.When a capacitive load is detected (e.g. a person touches the sensor-pad area...

SKU: DF-KIT0011

INTRODUCTION If you want to start playing with sensors, this sensor kit for arduino will be the perfect choice for you to get started. It comes with bundle of the most popular DFRobot sensors such as light sensors, gas sensors, sound sensors, touch sensors, distance sens...

SKU: WS-31334 · MPN: 31334

Unleash Your Creativity with the ESP32-S3 3.5inch Capacitive Touch Display Development Board Type BExplore the endless possibilities of IoT development with the cutting-edge ESP32-S3 3.5inch Capacitive Touch Display Development Board Type B. Crafted by the innovators at Waveshare, this all-in-one...

SKU: AF-4116

The Adafruit PyPortal is an all-in-one IoT display that makes it easy to build connected projects — pull data from web APIs, display custom touch screen interfaces, show live weather, news, stock tickers, and more. Powered by CircuitPython and Wi-Fi, it shows up as a USB drive so you can edit Pyt...

SKU: SF-DEV-13298

The Touch Board from Bare Conductive is an easy-to-use Arduino@Heart board that gives you the ability to turn almost any material or surface into a sensor. Each Touch Board offers 12 electrodes for your a conductive ink or other type of connector that can be drawn or attached to create light s...

SKU: AF-3619

Aww yeah, it's the Feather you have been waiting for, and now with stacking headers! The HUZZAH32 is our ESP32-based Feather, made with the official WROOM32 module. We packed everything you love about Feathers: built in USB-to-Serial converter, automatic bootloader reset, Lithium Ion/Polymer c...