All Products

SKU: AF-4302

The official Raspberry Pi Micro HDMI to Standard HDMI cable features quality overmoulding with the Pi logo and moulded grips for easy installation. At 1 metre long, it's the perfect length for desktop setups with the Raspberry Pi 4, Pi 5, and other boards with Micro HDMI output. Use two cables (...

SKU: PI-RPI-020

The Official Raspberry Pi Zero Case is designed to fit both the Pi Zero and Pi Zero W. It ships with three interchangeable lids so you can configure it for different use cases: a plain lid for a clean finish, a GPIO lid for header access from above, and a camera lid with a short ribbon cable for ...

SKU: AF-684

We love our black and white monochrome displays but we also like to dabble with some color now and then. Our new 0.96" color OLED displays are perfect when you need an ultra-small display with vivid, high-contrast 16-bit color. The visible portion of the OLED measures 0.96" diagonal and contains ...

SKU: AF-1673

We love our black and white monochrome displays but we also like to dabble with some color now and then. Our 1.27" color OLED displays are perfect when you need a small display with vivid, high-contrast 16-bit color. The visible portion of the OLED measures 1.27" diagonal and contains 128x96 RGB ...

SKU: FT-OLSH

Connect the 128x128 pixel OLED module to your Arduino-compatible board for a tiny, handy display with a joystick input and piezo sound output! The module can be plugged in directly on top of the shield, or connected via the supplied cable for remote mounting. The top of the shield features an ...

SKU: SF-SEN-00245

The DS18B20 is a digital temperature sensor from Maxim (now Analog Devices) that communicates over a 1-Wire bus. It reports temperature in degrees Celsius with 9 to 12-bit configurable resolution. Each sensor has a unique 64-bit serial number, allowing multiple sensors to share a single data line...

SKU: AF-3807

Ever wanted your own Linux-based IoT computer? A small one, that can be battery powered? The Onion Omega2 is sort of in-between a microcontroller (like an Arduino/CircuitPython/MakeCode running chip) and a full-fledged microcomputer (like Raspbery Pi). What you get is a bite-sized development ...

SKU: AF-5926 · MPN: ADA5926

MAJOR KEY ALERT 🔑🔑🔑 we now stock 'Key Lock Switches'! These are mechanical switches that don't use a button or a lever or a magnet to open and close the contacts. Instead, a literal key is used. This is a low cost but effective key lock switch that's nice and compact: you only need to drill a 12...

SKU: AF-1684

Push once to turn one side on, push again to turn off, push again to turn the other side on, one last push and its off again! It's basically a push-button toggle switch that connects and disconnects the middle pin from either of the two side switches with every click. This clicky switch makes a g...

SKU: AF-1683

This latching pushbutton toggle switch provides a simple push on / push off action — press once to turn on, press again to turn off. It delivers a satisfying tactile click and can reliably handle up to 500 mA at up to 50 V, making it well suited as a power switch or mode toggle for electronics pr...

SKU: AF-5927 · MPN: ADA5927

MAJOR KEY ALERT 🔑🔑🔑 we now stock 'Key Lock Switches'! These mechanical switches don't use a button, lever, or magnet to open and close the contacts. Instead, a literal key is used. This low-cost but effective key lock switch is nice and compact: you only need to drill a 12mm / 0.5" diameter hole...

SKU: PR-PIM269

Add a tiny yet convenient power switch to your Pi with OnOff SHIM! Our SHIMs (Shove Hardware in the Middle) are a new range of boards designed to be small, affordable, and handy. They're just 0.8mm thick (the bare board, not including mounted components) and designed to be soldered straight on...

SKU: PI-COM0202

A handy little pack of 5 operational amplifiers! Part no: LM224N LF347N Amplifier Type General Purpose J-FET Case or Package Type DIP14 DIP14 Gain Bandwidth Product 1.3 MHz 4 MHz Input Bias Current 20 nA 20 pA Input Offset Voltage 2000 uV 3000 uV Mounting Type Through Hole Through H...

SKU: DF-DFR0833

The OpenMV Cam is a small, low power, microcontroller board which allows you to easily implement applications using machine vision in the real-world. You program the OpenMV Cam in high level Python scripts(courtesy of the MicroPython Operating System) instead of C/C++. This makes it easier to dea...

SKU: DF-DFR0834

The OpenMV Cam LCD Shield adds a 1.8" colour TFT display to your OpenMV Cam, letting you see what the camera sees in real time without connecting to a computer. Simply plug the shield onto your OpenMV Cam and view the live camera feed on the go — perfect for field testing, demos, and standalone m...

SKU: DF-DFR1082 · MPN: DFR1082

##Introduction OpenMV Cam RT1060 is a compact, low-power microcontroller board with camera, facilitates the seamless implementation of real-world applications using machine vision. Programming of the OpenMV Cam is accomplished through high-level Python scripts, courtesy of the MicroPython Operati...

SKU: SF-SEN-30282 · MPN: SEN-30282

Build a connected weighing system without starting from low-level load cell code. OpenScale IoT is a wireless scale controller built around the ESP32-PICO-MINI, designed to turn a standard load cell setup into a configurable, connected weigh scale.Attach a four or five-wire load cell, or use four...

SKU: AF-477

Show your support for the open-source hardware movement with this embroidered iron-on patch featuring the Open Source Hardware (OSHW) logo. Originally created for the 2011 Open Hardware Summit, this badge is a great way to display your commitment to open design on bags, jackets, lab coats, or hat...

SKU: AF-693

Show your support for the open-source hardware movement with this glossy vinyl sticker featuring the Open Source Hardware logo. Originally designed for the 2011 Open Hardware Summit, this iconic gear-shaped logo represents the community of makers, engineers, and designers who share their hardware...

SKU: SF-SEN-00246

This sensor uses an infrared emitted diode combined with an infrared phototransistor to detect the reflected infrared signal. Ideal for sensing black-to-white transitions or can be used to detect nearby objects (.5-1cm).