All Products

SKU: TB-RR0606

A pack of eight 27kΩ metal film resistors rated at 0.5W. Same physical size as standard ¼W carbon film resistors, these metal film resistors offer tighter ±1% tolerance for applications requiring greater precision. Specifications Resistance: 27kΩ Tolerance: ±1% Power Rating: 0.5W Type: Meta...

SKU: SF-COM-25168 · MPN: COM-25168

This surface-mount resistor is a compact 2.7 kOhms part for electronics prototyping, repairs and small production runs.It is rated for 1/10W power dissipation with ±1% tolerance, making it suitable for circuits where a tighter resistance value is useful.Please note that this resistor is sold as a...

SKU: SF-COM-27915 · MPN: COM-27915

This is a compact surface-mount thick film resistor for PCB assembly and prototyping. It has a resistance of 27 Ohms, a 1/10W power rating, and ±5% tolerance.The part is supplied as a single SMD resistor, making it suitable for repairs, small builds, or adding a precise value to your parts drawer...

SKU: DF-FIT0328

A 2.7" white OLED display module with 128×64 pixel resolution, driven by the SSD1325 controller. The OLED technology delivers deep blacks, wide viewing angles, and a slim profile — with no backlight required, the display is thinner and lighter than comparable LCDs. Connects via hardware SPI for ...

SKU: DF-DFR0665

The 2.8" IPS TFT LCD Touchscreen is a full-colour display module with integrated resistive touch and a MicroSD card slot. Driven by the ILI9341 display controller and XPT2046 touch controller, it communicates over SPI and works with both 3.3V and 5V logic. The IPS panel provides wide viewing ang...

SKU: DF-DFR1199 · MPN: DFR1199

An all-in-one stepper motor module combining the 28BYJ-48 geared stepper with an A4988 driver on a single board. The simplified 4-pin interface (STEP, DIR, 5V, GND) connects directly to Arduino, Raspberry Pi, or ESP32 – no complex wiring required. Key Features Integrated Motor + Driver – Singl...

SKU: SF-COM-28379 · MPN: COM-28379

This colour TFT touchscreen is a compact display module for adding high-resolution graphics to compatible maker projects. It provides a 320x240 pixel display area in a 2.8 inch format, using the ILI9341 controller.The display is recommended for use with Teensy 3.2 through to Teensy 4.1, making it...

SKU: WS-19804

The 2.8" Touch Display Module is designed for the Raspberry Pi Pico, featuring a 320×240 IPS screen with 262K colours and a resistive touchscreen. It connects via the onboard female pin header for direct attachment to the Pico — no wiring required. Driven by the ST7789 display controller and XPT...

SKU: DF-FIT0881

A 28-piece universal DC adapter kit with 5.5 × 2.1mm female connectors converting to a variety of DC barrel jack sizes. Compatible with standard 2.5mm DC male plugs, this kit lets you power laptops, displays, stereos, and other devices when the original power connector doesn't match. Warning: T...

SKU: DF-FIT0218

A 28-pin Zero Insertion Force (ZIF) socket, 0.3" wide, with high-conductivity terminals for solid connections. The lever mechanism allows easy chip insertion and removal without bending pins, making it ideal for circuits where chips are frequently exchanged. Key Features Zero Insertion Force –...

SKU: AF-382

A Zero Insertion Force (ZIF) socket for DIP chips of up to 28 pins and 0.3" width. The lever mechanism allows you to insert and remove chips without applying force, preventing bent or damaged pins. Lift the lever to open, drop the chip in, and push the lever down to latch it securely. The socket...

SKU: AF-1774

The 2.8" TFT Display with Resistive Touchscreen is a bare LCD module featuring 320×240 resolution with individual RGB pixel control. Driven by the ILI9341 chipset, it supports SPI (3- or 4-wire), 8-bit parallel, and 16-bit parallel interfaces. The resistive touchscreen is an analogue type that r...

SKU: AF-2090

The 2.8" TFT LCD Breakout Board features a bright, full-colour display with a capacitive single-touch touchscreen and an onboard MicroSD card socket. With 240×320 resolution and individual RGB pixel control, it delivers vivid colour output for interactive projects. The breakout supports two inte...

SKU: AF-1770

The 2.8" TFT LCD Breakout Board features a bright, full-colour display with a resistive touchscreen and an onboard MicroSD card socket. With 240×320 resolution and individual RGB pixel control, it delivers vivid colour output for interactive projects. The breakout supports two interface modes: 8...

SKU: AF-1947

The 2.8" TFT Touch Shield with Capacitive Touch plugs directly into an Arduino and provides a bright, full-colour display with a smooth glass capacitive touchscreen and onboard MicroSD card socket. Fully assembled and ready to use — no wiring or soldering required. This shield uses SPI for the d...

SKU: AF-1651

The 2.8" TFT Touch Shield with Resistive Touch Screen plugs directly into any Arduino UNO or Mega-shaped board, providing a bright, full-colour display with touch input and an onboard MicroSD card socket. Fully assembled and ready to use — no wiring or soldering required. This shield uses SPI fo...

SKU: EC-AMS320240TFT

The 2.8" TFT Touch Shield V4.3 is an Arduino-compatible display shield featuring a 240×320 colour LCD with a resistive touchscreen and onboard SD card socket. It communicates over SPI, keeping pin usage low and leaving more pins available for other components. Driven by the ILI9341 controller, t...

SKU: PL-1094

A miniature low-power 6V brushed DC gearmotor with a 297.92:1 metal gearbox. With a 10 × 12mm cross section, this micro metal gearmotor delivers useful torque in an extremely compact form factor. The D-shaped output shaft is 3mm in diameter and extends 9mm from the gearbox. Key Features 297.92...

SKU: LB-LS5508

A 2×AA battery holder with a protective cover, built-in on/off switch, and large alligator clip leads. The alligator clips make it easy to connect to circuits, components, and conductive materials without soldering — ideal for quick prototyping and classroom projects. Key Features 2×AA Capacit...

SKU: AF-245

The 2-Axis Joystick provides analogue input for your projects using two independent 10K potentiometers — one per axis. It reports position as either voltage or resistance, making it compatible with a wide range of microcontrollers including Arduino and Raspberry Pi. The modular form factor plugs...