All Products

SKU: AF-4213

If you need to add a panel-mount connection but don't have the time or ability to cut a custom oval or square hole, this Micro USB B Round Panel Mount Plug is the easiest and fastest way to panel-ify your project. It's about 30mm in diameter, so you can drill a hole in your wood, plastic or ...

SKU: DF-FIT0265

Micro USB 2.0 to USB type A cable, a standard USB connector for cellphones, Arduino Leonardo or other embeded boards to common computer connector. This is a consumer standard, smaller connector for USB devices. Micro USB connectors are about half the height of mini USB. Micro USB is found on n...

SKU: AF-2727

This adapter cable converts a 5.5mm/2.1mm DC barrel jack power supply to a Micro USB plug, allowing you to power Micro USB devices from a standard barrel jack power adapter. The barrel jack end is centre-positive polarity. It works great for powering Arduinos, BeagleBones, Raspberry Pis, Android...

SKU: AF-2789

The premise of this MicroUSB to 5.5/2.1mm DC Barrel Jack Adapter is simple. There's a MicroUSB plug on one end and a 5.5mm/2.1mm DC barrel jack with center positive polarity on the other. This allows you to connect one of our 5V 2 Amp, 5V 4A or 5V 10 Amp adapters ...

SKU: LB-LS7522

A 30cm breakout cable with a Micro-USB plug on one end and clearly labelled screw terminals on the other. Provides easy access to power and data lines for prototyping, enclosures, and custom installations without soldering. Key Features Micro-USB to Screw Terminal – Easy access to VBUS, GND, D...

SKU: AF-3610

This cable is a little unusual, rather than having a USB A plug on one end, it has two Micro B USB connections! What is this for? It's for when you have a "USB On-The-Go (OTG)" device, and you want to plug in another USB device. For example, a Pi Zero or Pi Zero W has a OTG port, as does the A...

SKU: EF-EF10131

An 80 cm white Micro-USB cable suitable for powering and programming the BBC micro:bit and other Micro-USB devices. The 4-core shielded cable supports both charging (up to 2A) and data transfer simultaneously. Key Features 80 cm Length – Convenient length for desk and classroom use USB-A to M...

SKU: SF-PRT-09536

Looking to add MIDI to your project? This is a female, 5-pin, right-angle DIN 5/180? connector which will interface with most standard MIDI cables. The pins are spaced by just about 0.1", making these connectors easy to prototype with. The contacts are rated to 2A @100VAC and 1A @ 24VDC. Keep...

SKU: DF-FIT0261

INTRODUCTION Shape Memory metals that were developed by NASA for the space industry, and have been used for increasing applications down on earth.For example,there have been limited studies on using these materials in robotics. They make it possible to create very lig...

SKU: DF-KIT0152-EN

MindPlus Coding Kit for Arduino is a set of tools for programming learning. As its compatibility for Mind+, a graphical coding software for starters, and Arduino IDE, this kit is well applicable to students from the lower grade to the higher grade. It comes with an Arduino Uno R3 mainboard and a ...

SKU: AF-2765

The Mini 2-Axis Analog Thumbstick is a compact, self-centring joystick with a black rocker cap, similar in style to PSP joysticks. It provides smooth directional analogue input using two 10 kΩ potentiometers — one for the X-axis and one for the Y-axis. The voltage output follows the motion of th...

SKU: AF-460

Put a voltage meter anywhere with this very handy display. These are often used by RC hobbyists for keeping track of batteries but we thought it would be great on a breadboard or enclosure. This is the 2-wire version of the volt meter, two wires are used to power it and measure at the same tim...

SKU: AF-3244

A compact three-layer round robot chassis kit with two DC drive motors, matching wheels, and a caster ball for balance. The high-strength anodised aluminium alloy frame provides a sturdy platform for building your own 2WD mobile robot, with three layers of mounting space for batteries, controller...

SKU: AF-705

A compact 3-wire voltage meter with a vivid green 3-digit 7-segment display. Reads 0–99.9VDC with 0.1V precision, making it perfect for monitoring battery levels, power supplies, and electronic projects. Mounting tabs allow easy attachment to enclosures or panels. The 3-wire design separates pow...

SKU: AF-3084

Looking for an ultra-thin heat sink for your Raspberry Pi 3? Check out this nice and slim 13x13x3mm Heat Sink! This heat sink is made from high quality aluminum and will work perfectly with any Raspberry Pi  but is best paired with a Raspberry Pi 3 since it can run a little hot....

SKU: AF-3102

A compact analogue joystick with two 10kΩ potentiometers and a spring-return mechanism. Unlike arcade-style joysticks that use clicking switches, this joystick provides smooth, proportional analogue output across a full 50° range in both X and Y axes. Connect each potentiometer between ground and...

SKU: TB-GT4294

Relive the golden age of arcade gaming with this compact console packing 256 classic games into one portable unit. The arcade-style joystick and responsive buttons deliver an authentic retro feel, while the built-in 2.8-inch colour display keeps everything crisp and vibrant — no TV required. Pow...

SKU: AF-1624

A compact 8×8 pure green LED matrix in a 20 × 20 mm (0.8″) package. With 64 LEDs, 16 pins (8 per side), and standard 2.54 mm (0.1″) pin spacing, it plugs directly into a breadboard with room to spare for wiring. This matrix uses pure green LEDs, which produce a deeper, richer green than standard...

SKU: AF-3368

Looking for another way to keep your Raspberry Pi cool? Hook up this 5V Mini Cooling Fan and prevent your hard-working Pi from overheating! Of course, it's also great for use with any small computer or FPGA or motor driver or anything that needs cooling. Plug the fan directly into yo...

SKU: AF-4468

This miniature 5 V cooling fan keeps small computers, FPGAs, motor drivers, and other heat-generating components cool. It features a Molex PicoBlade 1.25 mm pitch 2-pin connector for easy plug-in attachment to compatible board headers, or you can cut the connector off and solder or clamp the wire...