All Products
Showing 681-700 of 8664 products · 2502 unavailable products hidden
40 Pin Break Away Male Header- Right Angle-10 Pcs
40 Pin Dual In-Line (DIL) / Jumpers
40-pin FPC Extension Board + 200mm Cable
40-pin FPC to Right Angle 2x20 IDC Female Socket Header
40-pin FPC to Right Angle 2x20 IDC Male Plug Header Adapter
40-pin FPC to Straight 2x20 IDC Female Socket Header
40-pin FPC to Straight 2x20 IDC Male Plug Header
40 Pin GPIO Extension Cable for any 2x20 Pin Raspberry Pi - 150mm / 6 long
40 Pin GPIO Male to Female Ribbon Cable - 150mm
40-pin TFT Friend - FPC Breakout with LED Backlight Driver
40-pin ZIF socket
40W Temperature Controlled Soldering Station
4-20SC-MaxSonar-WRMI(MB7789)
4.2" 400x300 Monochrome/4-Grey eInk Bare Display
MPN: ADA6381
433MHz RF Transceiver CC1101 Module
433Mhz RF Transmitting Receiver Module
4.3 40-pin TFT Display - 480x272 with Touchscreen
434Mhz Serial RF Module HC-11 (1-40M)
4.3inch QLED Display, DSI Interface, 800 × 480, Integrated Structure, Toughened Glass Panel
4.58-inch 320x960 RGB TTL TFT Display - No Touchscreen
MPN: ADA5805
40 Pin Break Away Male Header- Right Angle-10 Pcs
A pack of 10 right-angle male header strips, each with 40 breakable pins at 2.54mm pitch. The 90° bend allows horizontal connections from vertically mounted PCBs, ideal for compact enclosures and edge-mounted connectors. Snap or cut the strips to any size needed for custom PCBs or general protot...
40 Pin Dual In-Line (DIL) / Jumpers
A 40-pin (2×20) dual in-line (DIL) jumper strip rated at 3A. The snap-apart design lets you break the strip into individual 2-pin jumper shunts or smaller groups to suit your needs. Key Features Snap-Apart Design – Break to any size from the 2×20 strip 3A Current Rating – Suitable for power a...
40-pin FPC Extension Board + 200mm Cable
A 40-pin FPC extension board with an included 200mm flexible flat cable. Adds approximately 22cm of reach (20cm cable plus 2cm board) to devices using 40-pin, 0.5mm pitch FPC/FFC connections such as TFT displays. The board features two 40-pin flex connectors (both bottom-contact type), allowing ...
40-pin FPC to Right Angle 2x20 IDC Female Socket Header
A 40-pin FPC to right-angle 2×20 IDC female socket header adapter board. Converts a standard 40-pin 0.5mm pitch FPC/FFC cable connection into a Raspberry Pi-compatible GPIO socket, allowing you to extend or relocate your Pi's GPIO header using a slim, flexible cable. Plug the female socket direc...
40-pin FPC to Right Angle 2x20 IDC Male Plug Header Adapter
A 40-pin FPC to right-angle 2×20 IDC male plug header adapter board. Converts a standard 40-pin 0.5mm pitch FPC/FFC cable connection into a male GPIO plug, allowing you to connect HATs and Bonnets at a distance from your Raspberry Pi via a slim, flexible cable. Insert the male plug into your HAT...
40-pin FPC to Straight 2x20 IDC Female Socket Header
A 40-pin FPC to straight 2×20 IDC female socket header adapter board. Converts a standard 40-pin 0.5mm pitch FPC/FFC cable connection into a Raspberry Pi-compatible GPIO socket, allowing you to extend or relocate your Pi's GPIO header using a slim, flexible cable. Plug the female socket directly...
40-pin FPC to Straight 2x20 IDC Male Plug Header
A 40-pin FPC to straight 2×20 IDC male plug header adapter board. Converts a standard 40-pin 0.5mm pitch FPC/FFC cable connection into a male GPIO plug, allowing you to connect HATs and Bonnets at a distance from your Raspberry Pi via a slim, flexible cable. Insert the male plug into your HAT or...
40 Pin GPIO Extension Cable for any 2x20 Pin Raspberry Pi - 150mm / 6 long
A 150mm (6″) GPIO extension cable for Raspberry Pi models with a 2×20 pin header. Extends all 40 GPIO pins between your Pi and a HAT, Bonnet, pHAT, or other accessory, allowing you to mount add-ons away from the board. Plug the socket end onto the Raspberry Pi's GPIO header (white mark aligned w...
40 Pin GPIO Male to Female Ribbon Cable - 150mm
A 150mm GPIO ribbon cable for Raspberry Pi with a 2×20 male connector on one end and a 2×20 female connector on the other. Extends the full 40-pin GPIO header for use with HATs, Bonnets, and other accessories at a distance from the board. Works with any 40-pin Raspberry Pi, including the Pi 400 ...
40-pin TFT Friend - FPC Breakout with LED Backlight Driver
A labelled breakout board for 40-pin dot-clock TFT displays with an integrated LED backlight driver. Breaks out all 40 FPC pins to breadboard-friendly through-hole pads and includes a FAN5333-based boost converter for driving backlight LED strings up to 24V. The backlight driver defaults to 25mA...
40-pin ZIF socket
A 40-pin Zero Insertion Force (ZIF) socket for DIP chips up to 0.6″ wide. The lever-operated mechanism allows chips to be inserted and removed without bending pins, making it ideal for chip programmers, testing, and applications where ICs need to be swapped frequently. Lift the lever to open the...
40W Temperature Controlled Soldering Station
An entry-level temperature-controlled soldering station ideal for hobbyists and beginners. The lightweight iron features an anti-slip grip and comes with a tip-cleaning sponge, while the base unit provides analogue temperature control from 150°C to 450°C via a simple dial. A 4 mm banana socket c...
4-20SC-MaxSonar-WRMI(MB7789)
The MB7789 4-20SC-MaxSonar-WRMI is a rugged, weather-resistant ultrasonic distance sensor with self-cleaning capability, designed for outdoor applications in high-moisture or condensation-prone environments. It provides millimetre-resolution distance readings from 500mm to 5000mm using a 4–20mA a...
4.2" 400x300 Monochrome/4-Grey eInk Bare Display
· MPN: ADA6381
E-Ink and ePaper panels are ideal for low-power projects where the image needs to stay visible without continuous power. This bare 4.2 inch display has a paper-like, high-contrast look that remains readable in daylight and keeps its image even when power is disconnected.This is the display elemen...
433MHz RF Transceiver CC1101 Module
A low-cost sub-1 GHz RF transceiver module based on the Texas Instruments CC1101 IC, designed for low-power wireless communication. Pre-configured for 433 MHz operation, it is well suited for ISM and Short Range Device (SRD) applications with a transmission range of 300–500 metres depending on en...
433Mhz RF Transmitting Receiver Module
A simple 433 MHz RF link kit consisting of a transmitter and receiver pair, commonly used for basic wireless remote control and data transmission between microcontrollers. The ASK (Amplitude Shift Keying) modulation makes these modules easy to use with popular Arduino libraries such as VirtualWir...
4.3 40-pin TFT Display - 480x272 with Touchscreen
This 4.3" TFT display offers a 480×272 pixel resolution with 24-bit colour (8 red, 8 green, 8 blue parallel pins), an LED backlight, and a resistive touchscreen overlay. It's well-suited for projects that need a large display area for graphics or a user interface. This is a raw RGB TTL (pixel-do...
434Mhz Serial RF Module HC-11 (1-40M)
The HC-11 is a low-cost, high-performance FSK transceiver module operating at 434 MHz, designed for transparent wireless serial communication. With a UART/TTL interface, it handles all RF protocol processing internally — simply send serial data in and it appears wirelessly at the receiving module...
4.3inch QLED Display, DSI Interface, 800 × 480, Integrated Structure, Toughened Glass Panel
This 4.3" QLED display from Waveshare connects to Raspberry Pi via the DSI interface, providing a high-quality touchscreen with a single ribbon cable connection. The QLED (Quantum Dot LED) panel delivers a wider colour gamut (sRGB 92%, NTSC 78%) and more vivid colours compared to standard TFT dis...
4.58-inch 320x960 RGB TTL TFT Display - No Touchscreen
· MPN: ADA5805
This long rectangular TFT module is made for advanced display projects that need a wide bar-style screen with lots of pixels. The 4.58-inch IPS panel has a 320x960 resolution with 16-bit full-colour pixels, giving it a crisp, bright look for custom dashboards, status bars, instruments and other u...
