All Products

SKU: AF-642

This is a pre-wired and waterproofed version of the DS18B20 sensor made with a PTFE wire cable. Handy for when you need to measure something far away, or in wet conditions. This sensor is a little more expensive than the other waterproof version we have with a PVC cable because this one can be...

SKU: WS-31512 · MPN: 31512

Unleash unparalleled power and precision into your robotic and RC projects with our 20kg.cm / 35kg.cm Large Torque 180° Digital Servo. With options for both robust copper and steel gears, this servo is designed to meet the most demanding applications where traditional servos fall short. Whether y...

SKU: WS-31391 · MPN: 31391

Ensure that your mechanical projects are powered with precision and durability by integrating the WP5320/WP5335 Large Torque 180° Digital Servo. This robust and high-performance servo is designed to provide exceptional control and strength for your most demanding applications. Product Descri...

SKU: DF-SER0066 · MPN: SER0066

##Introduction This is an exceptional high-torque, waterproof digital servo with a magnetic encoder, boasting a maximum torque of 25kg. It features a 12-bit high-precision magnetic encoder sensor that allows for precise and absolute control of the servo's position within a 360-degree range, ensur...

SKU: DF-SER0067 · MPN: SER0067

This high-torque waterproof digital servo delivers up to 35 kg·cm of torque at 7.4V and features a 12-bit magnetic encoder for precise absolute position control across a full 360° range. Built for demanding robotics and automation applications, it combines reinforced steel gears, dual ball bearin...

SKU: DF-SER0065 · MPN: SER0065

##Introduction This is a high-torque waterproof coreless digital servo with a robust metal construction. It boasts an impressive torque of 35kg, allowing for precise control within a 180-degree range. With improved linear motion, it features an internal gear system made of reinforced steel gears ...

SKU: DF-SER0063 · MPN: SER0063

##Introduction This is an extraordinary water-resistant digital servo with formidable torque, possessing a torque capacity of 20kg and a controllable angle of 180 degrees. It exhibits enhanced linear motion and features an internal configuration of copper gears, with the gear axis thickened to an...

SKU: DF-SER0064 · MPN: SER0064

##Introduction This is an exceptional water-resistant digital servo with impressive torque. It boasts a torque capacity of 35kg and a controllable angle of 180 degrees. It exhibits superior linear motion and features an internal configuration of steel gears, with the gear axis thickened to an opt...

SKU: SF-SEN-15570

The HM01B0 from Himax Imaging is an ultra low power CMOS Image Sensor that enables the integration of an “Always On” camera for computer vision applications such as gestures, intelligent ambient light and proximity sensing, tracking and object identification. The sensor allows the sensor to co...

SKU: LB-FIL-0119

We've finally found the best HIPS filament in Australia! This is a 1Kg reel of dissolve-able 1.75mm colourless (no pigment) HIPS (High Impact Polystyrene) filament.Makers frequently use HIPS as support material because it is easily removed with Limonene solution (the main component in the oi...

SKU: SF-SEN-30183 · MPN: SEN-30183

This compact digital compass module is built around the HMC6343, a fully integrated electronic compass designed to deliver reliable heading data without making your main microcontroller do all the processing.Unlike basic magnetometers that need to be kept flat, the HMC6343 combines 3-axis magneto...

SKU: SF-ROB-21245

A compact hobby gearmotor from DAGU with a 48:1 gearbox ratio and 140 RPM unloaded speed. Features a 9mm output shaft on a straight axis with male connectors for easy wiring. A reliable, affordable option for small robotics and wheeled projects. Runs on 4.5VDC with a no-load current of 190mA — w...

SKU: SF-ROB-13302

These are a pair of hobby gearmotors from DAGU. These gearmotors are the same ones recommended for use in the Shadow Chassis and offer a cheap and easy-to-use setup to get your wheels turning. Each Hobby Gearmotor also possess a 9mm long output on a straight axis.These gearmotors require a voltag...

SKU: SF-ROB-13258

These are a pair of right angle, hobby gearmotors from DAGU. These gearmotors are the same ones utilized in the Magician Chassis and RedBot Kit and offer a cheap and easy to use setup to get your wheels turning. Due to these gear motors being at a right angle, you will also be able to track and c...

SKU: SF-TOL-09200

It’s like an Xacto knife, only better. We use these extensively when working with PCBs. These small knives work well for cutting traces, scraping ground pours, and guiding hair-like wires into their proper place. Excel knife comes with aluminum handle, one ultra-sharp blade, and safety cap.

SKU: LB-LS0845

You can never find a knife when you need one!    We use these when working with PCBs , cardboard and paper craft.These small knives work well for cutting traces, scraping ground pours, and guiding hair-like wires into their proper place. Excel knife comes with aluminum handle, three ult...

SKU: SF-ROB-11696

This is our new Hobby Motor now with a 6mm, 10 tooth, gear to make your basic projects a little simpler to manage. It works well for basic things like making a fan or spinning something pretty fast without much resistance. The motor has a normal operating voltage range of 1.0 to 3.0VDC but can...

SKU: SF-ROB-16413

The DG01D-E is a single hobby motor with a hall speed encoder. This motor requires a voltage between 3-9V, has a gearbox ratio of 1:48 and a speed of 90RPM at 4.5V. The voltage between positive and negative is determined according to the power supply voltage of the single chip microcomputer us...

SKU: SF-ROB-24053 · MPN: ROB-24053

These DG01D-E hobby motors come as a matched pair, each with a built-in hall effect speed encoder and a 1:48 plastic gearbox. The hall sensor detects the magnetic plate's polarity — south pole outputs high, north pole outputs low — giving you precise speed and position feedback for closed-loop mo...

SKU: SF-ROB-31141 · MPN: ROB-31141

Add motion and feedback to small robotics builds with this single DC gearmotor and integrated Hall effect speed encoder. Instead of simply driving a motor open-loop, your microcontroller can count encoder pulses to track wheel rotation and speed for more accurate navigation and speed control.The ...