Easy A
Connected to Proxmox. Passed into OPNSense GPS Time for the network. Easy.
Steven Holloway
DFRobot
USB GPS Receiver (2m Extension Cable)
All Products
GPS & Location Sensors
New Arrivals
Brands and Manufacturers
DFRobot
Sensors & Input
Prototyping & Wiring
$22.65
|
In stock at supplier
Based on a UBX-G7020-KT positioning chip, this USB GPS receiver is designed for low-power, high-sensitivity satellite positioning. It can receive 56-channel ...
Get notified when back in stock
Estimated Delivery
Arrives
Disclaimer
Secure checkout
Based on a UBX-G7020-KT positioning chip, this USB GPS receiver is designed for low-power, high-sensitivity satellite positioning. It can receive 56-channel satellite signals and is built for faster positioning and stronger reception than traditional GPS receivers.
The receiver includes a built-in antenna and an internal battery for storing satellite data such as signal status, final position and time, helping improve positioning speed on the next boot. Its USB interface makes it straightforward to use with controllers and computers such as Raspberry Pi, NVIDIA platforms and LattePanda.
A 2 metre USB cable is included, and the magnetic base lets the receiver attach easily to metal surfaces. It suits vehicle navigation, handheld positioning, wearable projects and other GPS-enabled applications.
Specifications:
- Chip: UBX-G7020-KT
- Frequency: L1, 1575.42MHz
- Frequency: L2,1561.10MHZ
- Frequency: L3,1602.00MHZ
- Baud Rate: 4800,9600,19200,38400,57600,115200bps
- Receiving Channel: 56CH
- Sensitivity tracking: -162dBm
- Sensitivity Acquisition: 160dBm
- Sensitivity cold start: -148dBm
- Cold Start: 29s average
- Warm Start: 3s average
- Hot Start: 1s average
- Accuracy: horizontal position accuracy<2.5M
- Accuracy: SBAS<2.0M
- Timing accuracy: 30ns
- Update Rate: 1Hz
- Outline Dimension: 38×49×16mm
- USB Length: 2m
- Operating Temperature: -40℃~85℃
- Storage Temperature: -40℃~85℃
Jargon buster
Plain-language definitions for the technical terms used above.
- baud
- Baud is the signalling rate of a serial connection, often used as the speed setting for UART communication. Matching the baud rate matters because both connected devices must use the same setting for readable data.
- GPS
- The US satellite navigation system used by GNSS receivers to calculate position and time. Support for GPS is important because it is widely available and often used together with other constellations for more reliable positioning.
- SBAS
- Satellite-Based Augmentation System, a set of regional services that broadcast correction information for GNSS receivers. SBAS can improve ordinary GPS-style positioning, although it is not the same as centimetre-level RTK correction.
Find this product in
Brands
UBX-G7020 Datasheet
Datasheet · 131.8 KB · Click any page to view full size
Supplier Webpage
Supplier Description · 646.3 KB · Click any page to view full size
