Store

Waveshare

· MPN: 31159

$18.00 |
In stock
No reviews yet

This compact development board from Waveshare combines the Raspberry Pi RP2350A microcontroller with a built-in 1.47″ LCD display, TF card slot, and RGB LED ...

Estimated Delivery
Arrives
Disclaimer
View Markdown
Secure checkout

This compact development board from Waveshare combines the Raspberry Pi RP2350A microcontroller with a built-in 1.47″ LCD display, TF card slot, and RGB LED — all in a tiny form factor with pre-soldered headers and USB-C connectivity.

The RP2350A features a unique dual-core, dual-architecture design with both Arm Cortex-M33 and Hazard3 RISC-V processor cores running at up to 150 MHz. With 520 KB SRAM and 16 MB onboard flash, it provides ample resources for display-driven applications and data logging projects.

Key Features

  • RP2350A Microcontroller – Dual-core Arm Cortex-M33 + dual-core Hazard3 RISC-V, up to 150 MHz
  • 1.47″ LCD Display – 172×320 resolution, 262K colours
  • Built-in RGB LED – With clear acrylic sandwich panel for lighting effects
  • TF Card Slot – For data storage and logging
  • USB-C Connector – Modern connector with USB 1.1 device and host support
  • Drag-and-Drop Programming – Flash firmware via USB mass storage
  • Low Power Modes – Sleep and dormant modes for battery-powered applications
  • Pre-Soldered Headers – Ready for breadboard use

Specifications

  • MCU – RP2350A (Raspberry Pi)
  • Cores – Dual Arm Cortex-M33 + dual Hazard3 RISC-V
  • Clock Speed – Up to 150 MHz
  • SRAM – 520 KB
  • Flash – 16 MB onboard
  • Display – 1.47″ IPS LCD, 172×320, 262K colours
  • USB – USB-C, USB 1.1 device/host
  • Onboard Sensors – Temperature sensor

Ideal For

  • Compact display-driven IoT projects
  • Data logging with visual feedback
  • MicroPython and C/C++ development
  • Wearable and portable electronics prototyping

Jargon buster

Plain-language definitions for the technical terms used above.

Arm Cortex-M33
A low-power Arm microcontroller core designed for real-time control tasks. It matters because it can handle timing-sensitive jobs such as reading sensors or driving motors while the main processor runs Linux.
Headers
Rows of metal pins used to plug a module into a breadboard or connect it with jumper wires. Pre-soldered headers make the module easier to use straight away without needing to solder the pins yourself.
IoT
Short for Internet of Things, meaning physical devices that connect to networks or the internet to send data or be controlled remotely. It matters if you want projects such as connected sensors, remote controls or classroom data-logging activities.
IPS
IPS is a type of LCD panel that keeps colours and contrast more consistent when viewed from an angle. This matters for small displays that may be mounted in a dashboard, handheld project, or enclosure where the viewer is not always looking straight on.
LCD
LCD stands for liquid crystal display, a screen technology that uses a backlight and liquid crystals to show images or text. It matters because LCD modules usually need a display driver and enough controller pins or a bus interface to send image data.
LED
A light-emitting diode is a small electronic component that lights up when current flows through it in the correct direction. In this kit, LEDs create the flashing effect, so polarity and correct soldering matter for the project to work.
microcontroller
A microcontroller is a small computer on a chip that runs your program and controls connected inputs and outputs. For this product, it is the part that reads buttons and sensors, drives the display and speaker, and communicates over Bluetooth.
MicroPython
A version of the Python programming language made to run on microcontrollers. It matters because it lets beginners write readable code to control LEDs, sensors, motors and displays without needing to start with lower-level languages.
RGB
Short for red, green and blue, usually referring to an LED that can mix those three colours. It matters because controlling an RGB LED teaches how separate outputs combine to create different colours.
RISC-V
An open processor architecture used inside some modern microcontroller chips. It matters because it affects the software tools, performance, and low-power features available for developing projects on the board.
SRAM
Fast temporary memory used by a processor while a program is running. More SRAM helps with projects that handle larger data buffers, networking, displays, or more complex code.
USB mass storage
USB mass storage is the standard USB device class used by many flash drives and external storage devices. If a board supports it, your project may be able to read and write files on compatible USB storage, provided the software library also supports the device.
USB-C
A modern reversible USB connector used for power and data connections. On this product it matters because it can connect directly to a computer as well as to a microcontroller project.

Related Tutorials

Free guides on learn.littlebird.com.au

Stella
Stella Expert

Ask me anything about this product

Maddy, co-founder of Little Bird

Need help? We're here for you!

Hi, I'm Maddy. My team and I are ready to help with your order or any questions.