Intel® Edison

$103.38

Part Number:  SS-102990161
Brand:  Seeed Studio Australia

Brief Introduction:   The Intel® Edison development platform is bringing down barriers in the world of wearables and IoT technology. Dimensions:32.5 x 25.0 x 3.9 mm             Main Features: Uses a 22nm Intel® SoC that includes a dual core, dual threaded Intel® Atom™ CPU at 500MHz and a 32-bit Intel® Quark™ microcontroller at 100 MHz.  It supports 40 GPIOs and...
We can dispatch today: - units (delivered by -)
We can dispatch in - days: - units (delivered by -)

Brief Introduction:

 

The Intel® Edison development platform is bringing down barriers in the world of wearables and IoT technology.

Dimensions:32.5 x 25.0 x 3.9 mm

 

 

 

 

 

 

Main Features:

  • Uses a 22nm Intel® SoC that includes a dual core, dual threaded Intel® Atom™ CPU at 500MHz and a 32-bit Intel® Quark™ microcontroller at 100 MHz.  It supports 40 GPIOs and includes 1GB LPDDR3, 4 GB EMMC, and dual-band WiFi and BTLE on a module slightly larger than a postage stamp.

  • The Intel Edison module will initially support development with Arduino* and C/C++, followed by Node.JS, Python, RTOS, and Visual Programming support in the near future.

  • It includes a device-to-device and device-to-cloud connectivity framework to enable cross-device communication and a cloud-based, multi-tenant, time-series analytics service.

Specification:

Physica                                                                                                                                               
Form factor Board with 70-pin connector
Dimensions 32.5 x 25.0 x 3.9 mm
Operating temperature 0 to 40 degC
Connector Hirose DF40 Series
(1.5mm, 2.0mm, or  3.0mm stack height)

Memory                                                                                                                                               

Max Memory size 4GB
Memory type DDR3, Nand Flash
Physical add. Ext. 32-bit
# of  DIMMs 0
ECC Memory supported:  NO
External Interfaces                                                                                                                              
Total of 40 GPIOs which can be configured as:
SD Card 1 Interface
UART 2 Controllers
I2C 2 Controllers
SPI 1 Controller with 2 chip selects
I2S 1 Controller
GPIO Additional 12 (with 4 capable of PWM)
USB 2.0 1 OTG Controller
Clock Output 32 KHz, 19.2 MHz
Major Edison Components                                                                                                                  
SoC 22nm Intel SoC includes: a dual core, dual threaded Intel Atom CPU at 500MHz, and a 32-bit Intel Quark microcontroller at 100 MHz
RAM 1 GB LPDDR3 POP memory
Flash Storage 4 GB eMMC
WiFi Broadcom 43340 802.11 a/b/g/n
Dual-band (2.4 and 5 GHz)
On board antenna or external antenna SKU configurations
Bluetooth BT 4.0
Power                                                                                                                                                  
Input 3.3V – 4.5V
Output 100ma @3.3V and 100ma @ 1.8V
Power Standby (No radios): 13mW
Standby (BT 4.0): 21.5mW
Standby (WiFi): 35 mW
Firmware + Software                                                                                                                           
CPU OS Yocto Linux v1.6
Development Environments Arduino IDE
Eclipse supporting: C, C++ & Python
Intel XDK supporting: Node.JS & HTML5
MCU OS RTOS
Development Environments MCU SDK and IDE


Tech. Documents:

Intel Edison Product Page

Intel Edison Product Brief

Getting Start

Software Download

Forum

Support

 

Related Products:

 

Intel® Edison Breakout Kit

Intel®  Edison Kit for Arduino

Intel®  Gelileo

Intel®  Gelieo Gen 2

USB Console Adapter for Intel Galileo

Grove starter kit plus – Intel IoT Edition for Intel Galileo Gen

Grove starter kit plus – Intel IoT Edition for Intel Galileo Gen 1

Galileo Case