Adafruit
DIN Rail Mount Bracket for Raspberry Pi / BeagleBone / Arduino
·
All Products
BeagleBone
New Arrivals
Adafruit
Arduino
Enclosures & Hardware
Raspberry Pi
Raspberry Pi Accessories
Prototyping & Wiring
$50.75
|
Out of stock
An aluminium mounting bracket for installing microcontrollers and single-board computers onto standard DIN rail. Ideal for simplifying wiring in control pane...
Get notified when back in stock
Estimated Delivery
Arrives
Disclaimer
Secure checkout
An aluminium mounting bracket for installing microcontrollers and single-board computers onto standard DIN rail. Ideal for simplifying wiring in control panels, enclosures, and industrial-style builds. No soldering required — simply mount your board using the included M2.5 standoffs.
Compatibility
- Raspberry Pi (any model with 4 mounting holes — Zero, Pi 4, etc.)
- Arduino Uno and Arduino Mega
- Adafruit Metro and Grand Central Express
- BeagleBone
Key Features
- Aluminium Construction – Durable and lightweight
- Standard DIN Rail Compatible – Clip-on adapter legs included
- No Soldering Required – Mount boards with the included standoffs and screws
- Universal Fit – Supports a wide range of common development boards
Package Contents
- 1× Aluminium bracket
- 1× Pair of DIN rail adapter legs with mount screws
- 6× M2.5 × 10 mm standoffs
- 6× M2.5 × 6 mm flat-head screws
- 6× M2.5 × 6 mm pan-head screws
Note: This product is the mounting bracket only. DIN rail, terminal block breakouts, and microcontroller/Pi boards are not included.
Jargon buster
Plain-language definitions for the technical terms used above.
- DIN
- As a pin label, DIN stands for 'data in', the input through which a device receives serial data from a controller, as found on SPI displays, LED drivers and other serial modules. DIN can also refer to the German standards body of that name, as in a round multi-pin DIN connector or DIN-rail mounting.
- DIN rail
- DIN rail is a standard metal mounting rail used inside industrial electrical cabinets. When a product is DIN rail mountable, it can be clipped neatly alongside power supplies, relays and other automation hardware in a panel.
- M2.5
- A metric screw thread size with a 2.5 mm nominal diameter. It matters for mounting because screws, standoffs, and holes must use the same size to fit securely without damaging the board.
- microcontroller
- A microcontroller is a small computer on a single chip that runs a stored program and controls connected inputs and outputs such as buttons, sensors, displays and communication interfaces. In a device built around one, it is the part that executes the code and coordinates the device's behaviour.
- Terminal block
- A terminal block is a connector that joins wires together in a neat, removable, or serviceable way, usually clamping each wire under a screw or spring instead of soldering. It makes it easier to connect, change, or service wiring without permanent joints.
Find this product in
Related Tutorials
Free step-by-step guides
