Store

Adafruit

$87.70 |
In stock at supplier
No reviews yet

Get started with wearable electronics using the Adafruit Gemma Sensor Starter Pack. This all-in-one kit includes a GEMMA V2 board, sewable RGB NeoPixels, mul...

Estimated Delivery
Arrives
Disclaimer
View Markdown
Secure checkout

Get started with wearable electronics using the Adafruit Gemma Sensor Starter Pack. This all-in-one kit includes a GEMMA V2 board, sewable RGB NeoPixels, multiple sensors, a rechargeable battery with charger, and everything you need to build interactive sewable projects — no soldering required.

Use conductive thread and alligator clips to connect sensors, lights, and sound to the tiny GEMMA board. Whether you're building a motion-reactive costume, a light-sensing wearable, or a buzzer alarm, this pack provides the components to bring your ideas to life.

Key Features

  • Complete Starter Kit – All components included to build sensing and interactive wearable projects
  • No Soldering Required – Connect everything with conductive thread and alligator clips
  • Rechargeable Battery – 3.7V 500 mAh LiPo battery with USB charger for portable projects
  • Sewable NeoPixels – Four Flora RGB NeoPixels for bright, programmable colour
  • Multiple Sensors – Light sensor, vibration sensor, and tactile switch for interactive input
  • Audio Output – Enclosed piezo buzzer for sound feedback

Ideal For

  • Wearable electronics and e-textile beginners
  • Interactive costume and fashion projects
  • STEM and maker education workshops
  • Sewable circuit experimentation

Package Contents

  • 1× Adafruit GEMMA V2 – Miniature wearable electronic platform
  • 1× Adafruit Micro Lipo – USB LiIon/LiPoly charger
  • 1× Lithium Ion Polymer Battery – 3.7V 500 mAh
  • 4× Flora RGB Smart NeoPixels V2
  • 1× Stainless Thin Conductive Thread – 2-ply, 25 metre
  • 1× Photo Cell (CdS Photoresistor)
  • 1× Small Alligator Clip Test Lead Set (12 pieces)
  • 1× USB Cable – A/Micro-B, 3 ft
  • 1× Tactile On/Off Switch with Leads
  • 1× Fast Vibration Sensor Switch
  • 1× Small Enclosed Piezo with Wires
Tip: Looking for more processing power? The Adafruit GEMMA M0 is a pin-compatible upgrade with CircuitPython support, 256 KB Flash, and native USB.

Resources

Jargon buster

Plain-language definitions for the technical terms used above.

alligator clip
An alligator clip is a spring-loaded metal clip used to make temporary electrical connections to wires, terminals or test points. It is useful for quick bench testing, but it is less secure than a screw terminal or locking connector.
CircuitPython
A beginner-friendly version of Python designed to run directly on microcontroller boards. If a product supports CircuitPython, you can often program it by copying code files onto the board rather than setting up a more complex toolchain.
conductive thread
Thread made with metal or other conductive fibres so it can carry electricity while being sewn into fabric. It matters for wearable and textile projects because it can replace wire, but it has more resistance than normal hookup wire.
LiPo
A lithium polymer rechargeable battery commonly used in portable electronics projects. It matters because LiPo batteries need correct charging circuitry and care, and this board includes hardware intended for that battery type.
native USB
Native USB means the microcontroller itself handles USB communication, rather than using a separate USB-to-serial chip. This matters for programming, debugging, and projects that need the board to act directly as a USB device.
photoresistor
A light-sensitive resistor whose resistance changes depending on how much light hits it. It matters for projects such as night-lights and light alarms because it gives a simple way for a microcontroller to sense brightness.
RGB
Short for red, green and blue, usually referring to an LED that can mix those three colours. It matters because controlling an RGB LED teaches how separate outputs combine to create different colours.
Thread
A low-power wireless mesh networking standard designed for smart home and IoT devices. It matters because Thread devices can relay messages through each other, helping build reliable networks for sensors and controllers.

Related Tutorials

Free guides on learn.littlebird.com.au

Stella
Stella Expert

Ask me anything about this product

Maddy, co-founder of Little Bird

Need help? We're here for you!

Hi, I'm Maddy. My team and I are ready to help with your order or any questions.