Adafruit
Adafruit 12V Bias Voltage Boost Converter - TPS61040
· MPN: ADA5644
The Adafruit 12V Bias Voltage Boost Converter uses the TI TPS61040 to generate 12V DC from as little as 3V input. This compact breakout is ideal for generati...
The Adafruit 12V Bias Voltage Boost Converter uses the TI TPS61040 to generate 12V DC from as little as 3V input. This compact breakout is ideal for generating the bias voltage needed by OLED displays, LED string backlights, and FLASH/EEPROM reprogramming — without requiring a separate 12V supply.
With a maximum output of approximately 40mA, this board is designed for low-current applications where a small amount of 12V is needed alongside an existing 3.3V or 5V supply. An Enable pin allows you to disable the output when not in use.
Key Features
- TPS61040 Boost Converter – Generates 12V DC from 2–6V input
- ~40mA Max Output – Suitable for bias voltage and low-current 12V applications
- Enable Pin – Pull low to disable the 12V output
- Compact Breakout – Pre-assembled with all required passive components
Ideal For
- OLED display bias voltage generation
- LED string backlight driving
- FLASH/EEPROM reprogramming voltage
- Projects needing a small 12V supply from a 3.3V or 5V source
Package Contents
- 1× Adafruit 12V Bias Voltage Boost Converter breakout (assembled)
- 1× Header strip
Specifications
- Boost Converter – TI TPS61040
- Input Voltage – 2–6V DC
- Output Voltage – 12V DC
- Max Output Current – ~40mA
Resources
Jargon buster
Plain-language definitions for the technical terms used above.
- boost converter
- A boost converter is a power circuit that raises a lower input voltage to a higher output voltage. It matters here because the board can power a sensor that needs a higher supply voltage while still using a single connector for power and data.
- breakout
- A breakout is a small circuit board that makes a tiny or hard-to-solder component easier to connect to with standard pins. It matters because this OLED module can be wired into a microcontroller project without needing to solder directly to the display’s fine contacts.
- EEPROM
- A type of non-volatile memory that keeps stored data even when power is turned off. In a sensor module, it can be used to store settings or calibration data so they do not need to be re-entered every time.
- LED
- A light-emitting diode is a small electronic component that lights up when current flows through it in the correct direction. In this kit, LEDs create the flashing effect, so polarity and correct soldering matter for the project to work.
- OLED
- OLED stands for organic light-emitting diode, a display type where each pixel produces its own light. It matters because OLED screens are thin, high-contrast and easy to read for small status displays, but they can be more sensitive to image burn-in than some other display types.
Find this product in
Brands
Power & Batteries
Related Tutorials
Free guides on learn.littlebird.com.au
