Wearable Tech & E-textiles

SKU: AF-5983 | Brand: Adafruit

Add animated hearts of colour to costumes, props and wearable projects without trying to sharply bend a flexible LED strip. This strand uses individual heart-shaped NeoPixel pixels connected by cable, making it easier...

SKU: AF-6024 | Brand: Adafruit

Add tiny points of addressable colour to costumes, props, wearables and embedded builds without fighting a fragile flexible PCB. This NeoPixel strand uses solid plated wire cords that hold their shape, making it easie...

SKU: AF-6023 | Brand: Adafruit

For wearable builds and sculptural lighting, this NeoPixel strand gives you lots of tiny RGB points without a flexible PCB to crack. Each coated NeoPixel sits on soft plastic-coated plated wire, so the strand can be s...

SKU: AF-6025 | Brand: Adafruit

Add tiny dots of colour to costumes, props, wearables and embedded builds without the stiffness of a normal flexible PCB strip. This NeoPixel strand uses solid plated wire that holds its shape, making it easier to sew...

SKU: AF-6026 | Brand: Adafruit

This strand puts tiny NeoPixel “pebbles” or “seeds” along solid plated wires, making it easier to add dots of colour to costumes, props, wearables and embedded structures than a flexible PCB strip that can crack when ...

SKU: SF-KIT-27921 | Brand: SparkFun

This all-in-one MyoWare 2 electromyography (EMG) kit gives you the essentials for measuring and visualising muscle activity. It is Arduino-compatible, but the included setup is designed to follow the standalone exampl...

SKU: AF-6379 | Brand: Adafruit

Measuring stretch and movement can be tricky, and this conductive rubber cord gives you a simple, hands-on way to do it. The cord is made from carbon-black impregnated rubber, with resistance that increases as it is p...

SKU: AF-4810 | Brand: Adafruit

Add a bit of blinky wearable-tech flair to your next party, workshop or classroom activity. This DIY paper bow tie kit combines simple electronics with craft, letting makers connect a coin cell battery and LED to crea...

SKU: LB-LR0281-5-I | Brand: Little Bird

This 5m length of EL wire (electroluminescent wire) is a flexible wire coated with phosphor which glows blue when applied with the appropriate voltage. Whilst EL wire looks similar to a thin neon tube, the wire is in ...

SKU: LB-FABRIC | Brand: Little Bird

A 20-metre roll of self-adhesive conductive fabric tape with copper and nickel coating on a high-strength polyester substrate. This flexible shielding tape is designed for EMI/RFI suppression in electronics, providing...

SKU: LB-LR0281-5-P | Brand: Little Bird

This 5m length of EL wire (electroluminescent wire) is a flexible wire coated with phosphor which glows blue when applied with the appropriate voltage. Whilst EL wire looks similar to a thin neon tube, the wire is in ...

SKU: M5-U029 | Brand: Little Bird

Description HEART is build with MAX30100.. MAX30100 is a complete pulse oximetry and heartrate sensor system solution designed for the demanding requirements of wearable devices. The MAX30100 provides ...

SKU: AF-1167 | Brand: Adafruit

This silver-plated knit conductive fabric is a flexible, stretchable material for e-textile and soft circuit applications. With a resistance of less than 1 ohm per foot in any direction, it conducts electricity reliab...

SKU: AF-4300 | Brand: Adafruit

The Adafruit HalloWing M4 Express is a skull-shaped development board powered by the ATSAMD51G18 — a 120 MHz Cortex M4 processor with 512 KB Flash and 192 KB RAM. Featuring a 1.54" IPS TFT display (240×240 pixels), a ...

SKU: AF-4182 | Brand: Adafruit

A 3.5 mm mono audio jack cable with alligator clips on the other end, making it easy to clip onto development boards like the BBC micro:bit or Adafruit Circuit Playground. Also compatible with AT (accessibility techno...

SKU: LB-LR0347A | Brand: Little Bird

This E-Textiles  Coin Cell Battery Holder has a small slide switch installed on the board, in-line with the power so you can shut off your project and save batteries. This slide switch is the same as is found on ...

SKU: PI-PSA001 | Brand: Pimoroni

The Pulse Sensor Amped is a plug-and-play heart-rate sensor for Arduino. It detects pulse by measuring changes in reflected light as blood pumps through your tissues, providing a real-time analogue signal that fluctua...

SKU: PL-1696 | Brand: Pololu

This force-sensing resistor (FSR) from Interlink Electronics is a passive component that exhibits a decrease in resistance when there is an increase in the force applied to the 0.58″-diameter (1.5 cm) active area...

SKU: AF-615 | Brand: Adafruit

This gold-eye sharps needle set is perfect for hand-sewing with conductive thread and wearable electronics parts. The pack includes 20 needles in sizes #3 to #9, giving you the right needle for any e-textiles or gener...

SKU: AF-2328 | Brand: Adafruit

Adafruit DotStar LED strips use 2-wire SPI instead of the single-wire protocol used by NeoPixels, allowing much faster data rates (up to 32 MHz) and a 20 KHz PWM refresh rate. This makes DotStars ideal for persistence...