Wearable Tech & E-textiles

SKU: SF-DEV-11013 | Brand: SparkFun

The LilyPad MP3 Player is an all-in-one audio board combining an Arduino-compatible microcontroller, MP3 decoder, microSD card socket, and stereo amplifier. Part of the LilyPad e-textiles line, it's designed to add mu...

SKU: AF-623 | Brand: Adafruit

This electroluminescent (EL) panel produces a smooth, even glow across its entire 10 cm × 10 cm surface. The aqua (blue-green) colour is the natural EL colour and the brightest option available. The panel is flexible,...

SKU: AF-624 | Brand: Adafruit

EL panel is the big sister to EL wire - it has the same glow effect but with a flat shape instead of a round shape. This is a big sheet of flexible plastic coated with EL material so its like one big glowing square...

SKU: DF-FIT0743 | Brand: DFRobot

This smooth stainless steel fibre thread is made for sewing conductivity into fabric and wearable projects. It offers low resistance, good thermal conductivity, a high melting point, and high-temperature resistance.Ea...

SKU: DF-FIT0744 | Brand: DFRobot

This smooth stainless steel fibre thread lets you sew conductive paths into fabric for wearable electronics and soft-circuit projects. It offers low resistance, good thermal conductivity, a high melting point and high...

SKU: DF-FIT0745 | Brand: DFRobot

This smooth stainless steel fibre sewing thread is conductive, making it handy for wearable electronics, soft circuits and other low-current maker projects. Each roll includes 10m of thread with a resistance of about ...

SKU: DF-FIT0746 | Brand: DFRobot

This smooth stainless steel fibre sewing thread is conductive, making it handy for e-textiles, wearable electronics and other small-current projects. It has a resistance of about 9Ω per metre and comes as a 7 metre ro...

SKU: DF-FIT0747 | Brand: DFRobot

This smooth stainless steel fibre conductive sewing thread is handy for soft circuits, wearables and e-textile projects where you need to stitch an electrical connection into fabric.Each roll provides 5m of thread wit...

SKU: DF-FIT0748 | Brand: DFRobot

This smooth stainless steel fibre sewing thread is conductive, making it handy for wearable electronics, soft circuits and other small-current projects where ordinary wire is too stiff.Each roll includes 1 metre of th...

SKU: SF-DEV-14014 | Brand: SparkFun

This is a simple pack of five Yellow LilyPad LEDs that are still attached to one another, letting you snap the LEDs apart at your leisure to sew into clothing or whatever else you can dream up.LilyPad is a wearable e-...

SKU: AF-1167 | Brand: Adafruit

This silver-plated knit conductive fabric is a flexible, stretchable material for e-textile and soft circuit applications. With a resistance of less than 1 ohm per foot in any direction, it conducts electricity reliab...

SKU: LB-LR0347A | Brand: Little Bird

This E-Textiles  Coin Cell Battery Holder has a small slide switch installed on the board, in-line with the power so you can shut off your project and save batteries. This slide switch is the same as is found on ...

SKU: LW-TEK6 | Brand: Little Bird

Teknikio Blue star-shaped sewable LED board.  Product Details• Add light up LED Stars to your crafts• LED light is blue• Pack Includes 4x LED Stars• Recommended Age 8+

SKU: SF-KIT-13927 | Brand: SparkFun

The LilyPad Sewable Electronics Kit is an introduction to the world of e-textiles and electronic sewing. Through a series of guided projects, you'll learn to sew basic circuits, light up LEDs, control them with button...

SKU: SF-DEV-13902 | Brand: SparkFun

This is a simple pack of five White LilyPad LEDs that are still attached to one another, letting you snap the LEDs apart at your leisure to sew into clothing or whatever else you can dream up.LilyPad is a wearable e-t...

SKU: AF-653 | Brand: Adafruit

This sewable CR2032 battery holder makes it easy to add power to wearable electronics projects. Two small 1mm holes in the metal connection tabs are perfectly sized for a #5 or smaller needle to pass through, so you c...

SKU: AF-4429 | Brand: Adafruit

This 13.56 MHz RFID/NFC sewable button uses an NTAG213 chip in a compact 24 mm laundry-tag form factor. It can be sewn into garments, attached to equipment, or embedded in projects for contactless identification, data...

SKU: KI-2715 | Brand: Kitronik

A starter kit for e-textiles and wearable electronics from Kitronik's Electro-Fashion range. This Discovery Pack includes a curated selection of sewable components — LEDs, switches, coin cell holders, conductive threa...

SKU: PI-TEK004 | Brand: Pimoroni

A four pack of sewable, heart-shaped bright pink LEDs. The voltage (and hence current) supplied from LIR2032 rechargeable coin cell batteries may damage the Teknikio LED boards, so please ONLY USE CR...

SKU: LB-LR0309-45 | Brand: Little Bird

A 1-metre length of soft conductive sewing thread made from stainless steel, designed for wearable electronics projects. Use it to sew electrical connections between LilyPad components, sewable LEDs, and batteries — r...