Wearable Tech & E-textiles

SKU: SF-DEV-13735 | Brand: SparkFun

Blink any color you need! Use the LilyPad RGB LED board as a simple indicator, or by pulsing the red, green, and blue channels, you can produce a broad variety of colors. Each of the colors in the RGB LED are connecte...

SKU: AF-1324 | Brand: Adafruit

Conductive hook & loop tape is just like the stuff you've seen on jackets, clothes, shoes, and bags, but is coated with silver to make it fully conductive. Originally this was designed to the manufacture of static-...

SKU: AF-3670 | Brand: Adafruit

High-conductive heating fabrics are Literally! This non-woven fabric feels a little like felted paper but is filled with conductive material that can make the fabric emit heat when powered. Resistive heating fabrics s...

SKU: AF-1657 | Brand: Adafruit

Get started with Adafruit GEMMA with this lovely starter kit! Included is everything you need to make a basic project. There's a GEMMA board, four sewable bright RGB pixels, a battery holder and batteries, 2-p...

SKU: AF-1849 | Brand: Adafruit

Get started with wearable electronics using the Adafruit Gemma Sensor Starter Pack. This all-in-one kit includes a GEMMA V2 board, sewable RGB NeoPixels, multiple sensors, a rechargeable battery with charger, and ever...

SKU: AF-1870 | Brand: Adafruit

A simple sewable breakout board with a CR2032 coin cell battery holder pre-soldered on and 0.1" pitch breakout pins for easy connection. Ideal for powering very low-current projects or adding a battery backup circuit ...

SKU: SF-DEV-08777 | Brand: SparkFun

Detecting temperature changes has never been easier. The MCP9700 is a small thermistor type temperature sensor. This sensor will output 0.5V at 0 degrees C, 0.75V at 25 C, and 10mV per degree C. Doing an analog to dig...

SKU: SF-DEV-08463 | Brand: SparkFun

This is a small buzzer for the LilyPad system. Use 2 I/O pins on the LilyPad main board and create different noises based on the different frequency of I/O toggling. Loud enough to hear inside a pocket but not obtrusi...

SKU: SF-DEV-13343 | Brand: SparkFun

The LilyPad Reed Switch is a simple breakout for a reed switch that will make it easy to use in e-textiles circuits in exactly the same manner that you can currently use the LilyPad Button and Switch. In order to make...

SKU: AF-6201 | Brand: Adafruit

A warm-white LED filament shaped as the letter "J", made from COB (chip on board) LEDs — the same technology found in Edison-style LED bulbs. Dozens of micro LED diodes are bonded onto a thin metal backing and coated ...

SKU: AF-6210 | Brand: Adafruit

A warm-white LED filament shaped as the letter "S", made from COB (chip on board) LEDs — the same technology found in Edison-style LED bulbs. Dozens of micro LED diodes are bonded onto a thin metal backing and coated ...

SKU: AF-6217 | Brand: Adafruit

A warm-white LED filament shaped as the letter "Z", made from COB (chip on board) LEDs — the same technology found in Edison-style LED bulbs. Dozens of micro LED diodes are bonded onto a thin metal backing and coated ...

SKU: AF-6077 | Brand: Adafruit

If you’re looking to add a USB-C connector to your wearable tech project, check out our sewable connectors! This USB Type-C connector is mounted horizontally on a flexible, sewable base, with red and black power wires...

SKU: AF-6076 | Brand: Adafruit

If you want to add a Micro-B connector to your favorite garment for a wearable tech project, check out our sewable connectors! This Micro-B connector is mounted horizontally on a flexible, sewable base, with red and b...

SKU: AF-6075 | Brand: Adafruit

A 5.5/2.1mm DC barrel jack mounted on a flexible, sewable base for wearable tech and fabric-based projects. The jack sits horizontally with red (positive) and black (ground) wires extending from the bottom for easy po...

SKU: AF-5605 | Brand: Adafruit

These dLUX-dLITE succulent-shaped LEDs from Unexpected Labs are handcrafted decorative LEDs that look like tiny succulents when lit. Each LED is individually made, giving every piece a unique appearance — perfect for ...

SKU: AF-5491 | Brand: Adafruit

These ultra-fine wired LEDs are designed for model-makers and crafters but they could also come in handy for folks who want to add tiny points of light to a design without needing SMT-level soldering skills. Use ...

SKU: SF-DEV-14629 | Brand: SparkFun

The LilyPad Light Sensor is a sewable breakout board with an ALS-PT19 light sensor built in and ready to use right away. Each sensor outputs voltage between 0V and 3.3V depending on the level of ambient light shi...

SKU: AF-3673 | Brand: Adafruit

This kit is designed for use with the electronic textiles unit in the Exploring Computer Science (ECS, exploringcs.org) introductory computing curriculum for secondary students. It contains most of the materia...

SKU: AF-3672 | Brand: Adafruit

This kit is designed for use with the electronic textiles unit in the Exploring Computer Science (ECS, exploringcs.org) introductory computing curriculum for secondary students. It contains most of the materia...