Wearable Tech & E-textiles

SKU: SF-DEV-18426 | Brand: SparkFun

The MyoWare® 2.0 Arduino Shield is designed to easily connect up to six MyoWare 2.0 Muscle Sensors and Link Shields using 3.5mm TRS-to-TRS audio cables. The board comes pre-populated with male headers so all you would...

SKU: AF-1849 | Brand: Adafruit

Get started with wearable electronics using the Adafruit Gemma Sensor Starter Pack. This all-in-one kit includes a GEMMA V2 board, sewable RGB NeoPixels, multiple sensors, a rechargeable battery with charger, and ever...

SKU: SF-DEV-08777 | Brand: SparkFun

Detecting temperature changes has never been easier. The MCP9700 is a small thermistor type temperature sensor. This sensor will output 0.5V at 0 degrees C, 0.75V at 25 C, and 10mV per degree C. Doing an analog to dig...

SKU: AF-182 | Brand: Adafruit

This sensor can detect flexing or bending in one direction. They were popularized by being used in the Nintendo PowerGlove as a gaming interface.These sensors are easy to use, they are basically resistors that change ...

SKU: PR-PIM402 | Brand: Little Bird

This handy little speaker with onboard analogue amplifier works great with micro:bit, and it's sewable and croc-clippable!We use this little speaker in our MINI.MU kits, and it's an ideal way to add some sound to your...

SKU: SF-DEV-14629 | Brand: SparkFun

The LilyPad Light Sensor is a sewable breakout board with an ALS-PT19 light sensor built in and ready to use right away. Each sensor outputs voltage between 0V and 3.3V depending on the level of ambient light shi...

SKU: AF-3900 | Brand: Adafruit

The Adafruit HalloWing M0 Express is a skull-shaped development board built around the ATSAMD21G18 processor. Featuring a 1.44" full-colour TFT display, a 3-axis accelerometer, a light sensor, a speaker driver, and Fe...

SKU: AF-3865 | Brand: Adafruit

Here at Adafruit we love discovering new and exotic glowing things. Like moths to the flame, we were intrigued by these fresh Flexible Silicone Neon-Like LED Strips! They look a lot like neon, but without the ...

SKU: AF-2273 | Brand: Adafruit

This soft potentiometer is an interesting way to add an adjustable resistor / slide potentiometer to your wearable. You can use it to adjust the brightness of an LED, or as a sensor input to your Flora or Gemma. When ...

SKU: SF-DEV-11013 | Brand: SparkFun

The LilyPad MP3 Player is an all-in-one audio board combining an Arduino-compatible microcontroller, MP3 decoder, microSD card socket, and stereo amplifier. Part of the LilyPad e-textiles line, it's designed to add mu...

SKU: SF-DEV-27924 | Brand: SparkFun

Control a project with muscle activity instead of buttons, levers or joysticks. The MyoWare® 2.0 Muscle Sensor is an all-in-one surface electromyography (sEMG) sensor that detects the electrical signals generated when...

SKU: SF-KIT-27921 | Brand: SparkFun

This all-in-one MyoWare 2 electromyography (EMG) kit gives you the essentials for measuring and visualising muscle activity. It is Arduino-compatible, but the included setup is designed to follow the standalone exampl...

SKU: AF-6379 | Brand: Adafruit

Measuring stretch and movement can be tricky, and this conductive rubber cord gives you a simple, hands-on way to do it. The cord is made from carbon-black impregnated rubber, with resistance that increases as it is p...

SKU: AF-4300 | Brand: Adafruit

The Adafruit HalloWing M4 Express is a skull-shaped development board powered by the ATSAMD51G18 — a 120 MHz Cortex M4 processor with 512 KB Flash and 192 KB RAM. Featuring a 1.54" IPS TFT display (240×240 pixels), a ...

SKU: PI-PSA001 | Brand: Pimoroni

The Pulse Sensor Amped is a plug-and-play heart-rate sensor for Arduino. It detects pulse by measuring changes in reflected light as blood pumps through your tissues, providing a real-time analogue signal that fluctua...

SKU: PL-1696 | Brand: Pololu

This force-sensing resistor (FSR) from Interlink Electronics is a passive component that exhibits a decrease in resistance when there is an increase in the force applied to the 0.58″-diameter (1.5 cm) active area...

SKU: AF-1093 | Brand: Adafruit

Pulse Sensor Amped is a greatly improved version of the original Pulse Sensor, a plug-and-play heart-rate sensor for Arduino and Arduino compatibles. It can be used by students, artists, athletes, makers, and game & m...

SKU: DF-SEN0086 | Brand: DFRobot

A simple flex sensor 2.2" in length. As the sensor is flexed, the resistance across the sensor increases. Patented technology by Spectra Symbol - they claim these sensors were used in the original Nintendo Power G...

SKU: SF-DEV-18425 | Brand: SparkFun

The MyoWare 2.0 Link Shield connects a MyoWare 2.0 Muscle Sensor to your Arduino microcontroller via a 3.5mm TRS cable. Simply snap the Link Shield onto your Muscle Sensor using the built-in snap connectors, connect a...

SKU: AF-4343 | Brand: Adafruit

The Adafruit MONSTER M4SK is a dual-display development board designed for creating animated electronic eyes for costumes, props, and interactive projects. Powered by a 120 MHz ATSAMD51 Cortex M4 processor, it drives ...