Wearable Tech & E-textiles

SKU: SF-DEV-09350 | Brand: SparkFun

This is a simple slide switch for the LilyPad. Use it as a simple ON/OFF switch, or to control LEDs, buzzers, sensors, etc. The swtiches on each board are rated for 4 volts at 300mA, but will work at 5 volts with a re...

SKU: SF-DEV-08822 | Brand: SparkFun

A 20 mm coin cell battery holder designed for CR2032 batteries. The holder features a pop-in, pop-out mechanism for easy battery changes, and the mounting feet include small holes for sewing onto fabric — making it su...

SKU: SF-DEV-14010 | Brand: SparkFun

A pack of five pink LilyPad LEDs designed for wearable electronics and e-textile projects. The LEDs come attached to one another on a snap-apart strip, ready to be sewn into clothing, accessories, or fabric-based circ...

SKU: AF-659 | Brand: Adafruit

FLORA is Adafruit's fully-featured wearable electronics platform. It's a round, sewable, Arduino-compatible microcontroller designed to empower amazing wearables projects.FLORA comes with Adafruit's support, tut...

SKU: AF-603 | Brand: Adafruit

This 316L stainless steel conductive yarn sits between a thick thread and a thin yarn in weight. Its high conductivity and soft, flexible texture make it particularly well-suited for making touchscreen-compatible glov...

SKU: LB-EAGLED-LED-O | Brand: Little Bird

EagLED LEDs are purpose-built for e-textiles and wearable projects. This pack of 10 orange sewable LEDs come attached to each other on a snappable strip — simply break them apart as needed and sew them into clothing, ...

SKU: SF-DEV-08776 | Brand: SparkFun

We designed this board to give the user a low profile button without any sharp edges. Button closes when you push it and opens when you release (momentary push button).LilyPad is a wearable e-textile technology develo...

SKU: SF-DEV-10867 | Brand: SparkFun

This is 30 feet of conductive thread spun from stainless steel fiber and wound on a plastic bobbin. Use it to sew up all of your e-textile projects. This small bobbin is a great way to get into wearable electronics...

SKU: AF-3501 | Brand: Adafruit

The Adafruit GEMMA M0 is a tiny, coin-sized microcontroller board designed for wearable electronics and small projects. Despite its quarter-sized footprint, it packs serious power with an ATSAMD21E18 32-bit Cortex M0+...

SKU: LB-AAA-BATTERY | Brand: Little Bird

A small, but mighty power supply. This board was designed to be as small and inconspicuous as possible. Pop in a AAA battery, flip the power switch, and you will have a 5V supply to power your E-Textile circuit. ...

SKU: LB-ETEXTILELED-O | Brand: Little Bird

This is a simple single unit ORANGE E-Textile LEDEach unit can be sewn into fabric. Various input, output, power and sensor boards are available. They’re even washable (with special care)!These are a thicker PCB ...

SKU: LB-LR0281-5-LB | Brand: Little Bird

A 5-metre length of light blue electroluminescent (EL) wire with a battery-powered inverter included. EL wire is a flexible, phosphor-coated wire that emits a cool, even glow along its entire length — similar in appea...

SKU: LB-LR0335-B | Brand: Little Bird

This 5-metre length of EL wire (electroluminescent wire) glows a vibrant blue when powered by the included battery-operated inverter. EL wire is a flexible, phosphor-coated wire that produces a cool, even glow similar...

SKU: LB-LR0335-PI | Brand: Little Bird

This 5-metre length of EL wire (electroluminescent wire) glows a vibrant pink when powered by the included battery-operated inverter. EL wire is a flexible, phosphor-coated wire that produces a cool, even glow similar...

SKU: LB-ETEXTILEADXL335 | Brand: Little Bird

This three-axis accelerometer is designed for e-textiles projects and is based on the ADXL335 MEMS accelerometer from Analog Devices. It can be used to detect joint movement, inclination and vibration.The board provid...

SKU: AF-1222 | Brand: Adafruit

The Adafruit GEMMA V2 is a tiny, coin-sized wearable microcontroller board powered by an ATtiny85 processor. At just 28 mm in diameter, it's small enough to fit into any sewable or wearable project, and affordable eno...

SKU: AF-1168 | Brand: Adafruit

A silver-coloured woven conductive fabric made from copper and nickel-plated nylon. Highly conductive with a resistance of less than 1 Ω per 30 cm in any direction across the textile. Use it to create soft switches, p...

SKU: CB-11945692935 | Brand: Chibitronics

Color your world with Chibitronics MegaPack of 30 tropical LED circuit stickers.  This pack includes 10 pink, 10 orange, and 10 green LED circuit stickers.  Limited Edition, quantities limited.  

SKU: LB-LR0281-5-B | Brand: Little Bird

This 5m length of EL wire (electroluminescent wire) is a flexible wire coated with phosphor which glows blue when applied with the appropriate voltage. Whilst EL wire looks similar to a thin neon tube, the wire is in ...

SKU: LB-ETEXTILELED-YG | Brand: Little Bird

A single yellow-green LED module designed for e-textiles projects. Each unit features sewable tabs so it can be stitched directly into fabric using conductive thread. The thicker PCB design makes it more durable than ...