Voltage Regulators & Converters

SKU: LB-LS6795 | Brand: Little Bird

8-90V to 5V 5A DC-DC Step-Down Converter (25W, USB-C)This compact and efficient DC-DC step-down converter is designed to take an input voltage from 8V to 90V and regulate it down to a stable 5V output at up to 5A (25W...

SKU: DF-DFR0831 | Brand: DFRobot

INTRODUCTIONThis is a 20W DC-DC buck converter power module with 7~24V input and 5V/4A output(Max). The high conversion efficiency and on-board 6 output ports make it suitable for connecting multiple devices like, lar...

SKU: LB-AAA-BATTERY | Brand: Little Bird

A small, but mighty power supply. This board was designed to be as small and inconspicuous as possible. Pop in a AAA battery, flip the power switch, and you will have a 5V supply to power your E-Textile circuit. ...

SKU: DF-DFR0884 | Brand: DFRobot

This dual-USB step-down buck converter accepts 8–32V DC input and delivers a regulated 5V output at up to 3A across two USB Type-A ports simultaneously. With over 85% conversion efficiency and built-in reverse-connect...

SKU: AF-6106 | Brand: Adafruit

The Adafruit bq25185 with 5V Boost is an all-in-one charging and power supply board that supports USB, DC, and solar charging with an integrated 5V boost converter. It is designed for projects that need a stable 5V su...

SKU: LB-LS5548 | Brand: Little Bird

Introducing our Compact DC-DC Voltage Converter Module, a powerful and efficient solution for boosting your power supply needs. This tiny powerhouse is designed to elevate a low 1-5V input to a stable 5V output, perfe...

SKU: DF-DFR1202 | Brand: DFRobot

A high-efficiency DC-DC step-down (buck) converter that accepts 6–24 V input and delivers a stable 5 V output at up to 16 A. With over 90% conversion efficiency at typical loads and output ripple below 20 mV, it provi...

SKU: SF-COM-21256 | Brand: SparkFun

The SparkFun BabyBuck Regulator Breakout delivers a regulated 5V output from a 6–32V input in an ultra-compact 0.63" × 0.52" form factor. Based on the AP63357 synchronous buck converter from Diodes Inc., it provides u...

SKU: SF-COM-21255 | Brand: SparkFun

The SparkFun 5V Buck Regulator Breakout features the AP63357 from Diodes Inc., a 3.5A synchronous buck converter with a wide input voltage range of 3.8V to 32V. The fully integrated 74mΩ high-side power MOSFET/40m...

SKU: DF-DFR1026 | Brand: DFRobot

This is a DC charging and discharging integrated module, with 5V normally open output, which is not affected by load access and has a maximum load current of 2A. It features 4 levels of charge/discharge electricity in...

SKU: AF-4654 | Brand: Adafruit

The Adafruit MiniBoost 5V @ 1A is a compact inductor-based boost converter that delivers up to 1 A of regulated 5 V output from a 2–5 V input. About the size of a linear regulator, it's perfect for powering microcontr...

SKU: SF-COM-18375 | Brand: SparkFun

This is a high grade DC Buck converter that inputs 6 to 12V and outputs 5V up to 3A or 15W. With good thermal performance and protection, this DC block is perfect for battery applications (such as SLAs or LFPs) that n...

SKU: DF-DFR0914 | Brand: DFRobot

This DFRobot 4-channel optocoupler-isolated level converter translates 12V signals down to 5V, making it easy to interface industrial sensors and PLC outputs with Arduino and other 5V microcontrollers. Each channel fe...

SKU: AF-4739 | Brand: Adafruit

This little buck converter based on the MPM3610 is a marvel, taking up to 21V input and providing a 5V output with up to 1.2A current. It's great for supplying power to popular 5V voltage circuits from a range of b...

SKU: AF-5649 | Brand: Adafruit

The Adafruit QT 3V to 5V Level Booster Breakout lets you connect 3.3 V STEMMA QT / Qwiic devices to sensors and peripherals that require 5 V power or logic. Most modern microcontrollers (ESP32, RP2040, SAMD, micro:bit...

SKU: SF-PRT-28203 | Brand: SparkFun

  The SparkFun Qwiic 5V Boost simplifies interfacing 5V I2C devices with the 3.3V Qwiic ecosystem. It takes the 3.3V I2C signals and power from its Qwiic connectors and boosts them to 5V, available on the PTH...

SKU: WS-29927 | Brand: Waveshare

Transform your D-Robotics RDK X5 development board into a powerhouse of connectivity and reliability with the latest Power Over Ethernet Expansion Board. Designed to seamlessly integrate with the RDK X5, this PoE modu...

SKU: AF-5882 | Brand: Adafruit

The Adafruit DC Power BFF Add-On lets you power your QT Py or Xiao development board from a DC source up to 20V. The on-board MPM3610 integrated buck converter steps down the input to 5V at up to 1A, with no heat sink...

SKU: DF-DFR0929 | Brand: DFRobot

This industrial-grade 50W high-power step-down module offers a voltage input range of 9-18V and a maximum output of 5V/10A. It has the characteristics of high isolation withstand voltage of 1500V DC or 800V AC, low ra...

SKU: DF-DFR0912 | Brand: DFRobot

The 2-Channel Level Converter translates 12V signals down to 5V using optocoupler isolation, making it easy to interface industrial sensors and PLC signals with 5V microcontrollers like Arduino. It supports common ano...