Tools & Equipment

SKU: DF-TEL0190 | Brand: DFRobot

RainbowLink V2 is a pocket-sized USB Type-C serial debugging workstation that combines four independent communication channels with useful field power outputs. It replaces multiple USB dongles for RS485, RS232 and TTL...

SKU: SF-TOL-19752 | Brand: SparkFun

BitRunner lets Carbide Motion control power to your CNC router, so you do not need to reach for the router’s power switch when a program ends or a tool change is required.This V2 Deluxe version adds a lockout pendant,...

SKU: SF-TOL-19753 | Brand: SparkFun

BitRunner lets Carbide Motion control power to your CNC router, so you do not need to reach for the router switch at the end of each program or whenever a tool change is required.This V2 Standard version includes a lo...

SKU: SF-TOL-27923 | Brand: SparkFun

This handy tool helps remove a standard 2-pin JST-PH connector with 2mm pitch, such as the female connector commonly found on single-cell LiPo batteries. It gives you something safer and easier to grip than the connec...

SKU: DF-FIT0960 | Brand: DFRobot

This cordless smart soldering setup uses a super-capacitor inside the soldering handle, giving you cable-free movement at the bench without relying on a conventional battery pack. The OLED display lets you keep an eye...

SKU: DF-FIT0847 | Brand: DFRobot

The DT71 is a compact set of digital measuring tweezers that combines multifunction component measurement, a miniature waveform signal generator and fully differential input measurement in one portable tool.Its three-...

SKU: SF-TOL-27147 | Brand: SparkFun

This portable soldering setup gives you benchtop-style soldering performance without keeping you tied to a wall outlet. It is designed for workshop repairs, field work and anywhere you need a reliable soldering statio...

SKU: SF-CAB-30612 | Brand: SparkFun

Make cleaner, more reliable test connections on the bench with this set of five hook test leads. They are handy for electrical testing and prototyping where a secure, hands-free contact point can make measurements muc...

SKU: SF-TOL-25563 | Brand: SparkFun

Keep screws and small parts under control while you take devices apart. This magnetic project mat catches and securely holds loose screws as you remove them, helping you stay organised through repairs and electronics ...

SKU: SF-TOL-25564 | Brand: SparkFun

Keep screws, tiny parts and tools under control during electronics builds and repairs. This handy organiser is useful on any workbench, helping you separate parts as you disassemble, service or assemble delicate devic...

SKU: SF-TOL-25568 | Brand: SparkFun

The Moray is a compact everyday repair toolkit designed for electronics, appliances and small household jobs. At just 0.9in. x 3.1in. x 4.9in., it is easy to keep in a drawer, tool bag or everyday carry kit.iFixit bui...

SKU: SF-TOL-25577 | Brand: SparkFun

Keep tiny screws, brackets and parts under control during repairs with this premium project mat from iFixit. It combines a magnetic, gridded dry-erase surface with easy-access sorting bins, giving you two practical wa...

SKU: SF-TOL-29534 | Brand: SparkFun

This desoldering braid is a pre-fluxed copper wick for removing solder from joints, pads and accidental solder bridges. Place the braid over the solder, apply your soldering iron, and the activated flux plus the braid...

SKU: SF-TOL-29533 | Brand: SparkFun

This desoldering wick is a pre-fluxed copper braid for removing solder from joints, fixing excess solder, and cleaning up solder bridges. It is a handy bench consumable for rework, repairs, and swapping components on ...

SKU: SF-TOL-23913 | Brand: SparkFun

Get soldering quickly at the bench or out in the field with this compact smart soldering iron. It reaches operating temperature in just six seconds and provides digital temperature control from 100°C to 400°C, making ...

SKU: SF-TOL-29532 | Brand: SparkFun

This pre-fluxed copper desoldering braid is made for removing solder from joints, pads and small mistakes like solder bridges. Place it over the solder, heat it with your soldering iron, and the activated flux plus th...

SKU: SF-TOL-25931 | Brand: SparkFun

These Pro clamps are made from 6061 aluminium as a tougher alternative to the glass-filled nylon Essential Crush It Clamps. The aluminium construction gives them improved thermal resilience, so they can handle heat ge...

SKU: SF-TOL-25930 | Brand: SparkFun

This clamp set is made for reliable workholding on compatible CNC and machining setups. The clamps are heavy-duty, moulded from glass-filled nylon, and designed to be quick to remove thanks to magnetic actuation.The C...

SKU: SF-TOL-25101 | Brand: SparkFun

This Chip Quik no-clean tack flux syringe is a handy bench essential for soldering, desoldering, rework and reflow jobs. Flux helps stop solder beading and encourages it to flow cleanly onto pads, pins and parts, maki...

SKU: SF-PGM-31107 | Brand: SparkFun

The SEGGER J-Link EDU Mini is a compact JTAG/SWD debug probe for students and hobbyists working with Arm® and RISC-V-based microcontrollers. It delivers core J-Link debugging and flash programming functions in a small...