Tools & Equipment

SKU: SF-TOL-11784 | Brand: SparkFun

Are you frustrated with the lack of dexterity from most third hands? The SparkFun Third Hand gives you the ability to hold a board between two alligator clips on two flexible arms with multiple points of articulati...

SKU: SF-PRT-13827 | Brand: SparkFun

Copper tape has countless applications in electronics from creating low-profile traces for electrical components to RF-shielding and antenna-making. Copper tape is even used to join things together using solder, li...

SKU: AF-350 | Brand: Adafruit

The ENGINEER PA-09 is a precision micro crimping tool that makes clean, reliable crimps on the small contacts used in fine-pitch connectors — no more mangled contacts from generic pliers that crush instead of crimp. I...

SKU: AF-382 | Brand: Adafruit

A Zero Insertion Force (ZIF) socket for DIP chips of up to 28 pins and 0.3" width. The lever mechanism allows you to insert and remove chips without applying force, preventing bent or damaged pins. Lift the lever to o...

SKU: SF-TOL-13193 | Brand: SparkFun

A sturdy ratcheting crimping tool for making custom wiring harnesses with crimp pins and cable housings. The ratchet mechanism ensures consistent, reliable crimps every time — simply squeeze the handles until the plie...

SKU: SF-SWG-11046 | Brand: SparkFun

These were really nice safety glasses. Then we decided to completely ruin them and slap the geek logo on there. Don’t worry, it doesn’t impair your vision… dangerously. Here our photographer, Juan, is helping our...

SKU: DF-FIT0400 | Brand: DFRobot

A compact 30× magnification loupe with built-in LED illumination for inspecting circuit boards, solder joints, fine print, and small components. The fold-out design is pocket-friendly, making it a handy tool for the w...

SKU: AF-396 | Brand: Adafruit

If you've ever had to remove a stripped bolt or screw, you know how incredibly frustrating it can be. Normal pliers slip when trying to grip onto the screw head. Unless you're careful, you can easily make the problem ...

SKU: SF-TOL-13114 | Brand: SparkFun

A dual-sided resistor lead forming tool for bending component leads to precise through-hole spacing. One side handles 1/4W resistors with spacing from 0.4" to 1.5" (10–38mm), and the other handles 1/2W resistors with ...

SKU: SF-TOL-10719 | Brand: SparkFun

This is a replacement soldering tip for our Hakko FX-888 soldering iron. This is a bevel type of soldering tip. Replacing the tip is very easy - simply unscrew the shield, slip the replacement tip in, and screw the...

SKU: DF-DFR0359 | Brand: DFRobot

INTRODUCTION eClip is an innovative programming/testing tool specially designed for Makers. It solves the problem of prototyping wearable projects with ICSP and FTDI interfaces in limited spa...

SKU: AF-3284 | Brand: Adafruit

The Adafruit Pocket Screwdriver is a compact dual-ended tool that clips onto your shirt or pant pocket so you always have a screwdriver on hand. The Phillips head fits 3.5 mm terminal blocks commonly found on electron...

SKU: SF-TOL-10602 | Brand: SparkFun

Precision curved tweezers with an ESD-safe coating, ideal for handling surface-mount components and other small electronic parts. The fine curved tip provides excellent control when placing or removing tiny components...

SKU: AF-734 | Brand: Adafruit

A 100 g (1/4 lb) spool of SAC305 lead-free solder with no-clean rosin core flux. At 0.031" (0.8 mm) diameter, it's a versatile gauge suited to through-hole soldering and larger SMT work. The industry-standard SAC305 f...

SKU: TB-WH5683 | Brand: Little Bird

Jaycar 2:1 heatshrink tubing in a convenient 5-metre roll, ideal for insulating solder joints, bundling wires, and protecting cable terminations. The 5mm diameter shrinks down to 2.5mm, providing a snug, protective sl...

SKU: AF-1969 | Brand: Adafruit

The Pogo Pin Probe Clip is a great way to test and connect with pin-point accuracy without soldering! It's sort of like an alligator clip with a built in springy pogo pin - so you can connect to any PCB pad for 'sc...

SKU: AF-3539 | Brand: Adafruit

Hydro dipping is a fun, hands-on way of adding printed designs to any surface! This process can be done on any material that can hold the base coat and can be submerged into water. Works really well wit...

SKU: LB-LS7583 | Brand: Little Bird

A compact dual-fan cooling module for enclosures, 3D-printed builds, network gear, and DIY electronics. Two matched 70×70×15mm fans provide effective airflow and heat dissipation, powered via USB for simple plug-and-g...

SKU: AF-6308 | Brand: Adafruit

Perfect for a variety of small projects, these adhesive squares provide a strong bond to most surfaces and are an excellent way to attach heat sinks to a chip.Each tab is 0.5" (12.7mm) square and 1.25mm thick. You get...

SKU: AF-6272 | Brand: Adafruit

Here is a handy measurement data display to help you see in real time the load flowing into your devices as they charge via USB-C. You'll have immediate readings of voltages, amps, and watts along with their peaks.Thi...