Standoffs & Screws
Stock your project box with the right hardware — M2, M2.5, M3 standoffs, screws, nuts, and spacers in metal and nylon, all popular sizes. Whether you're mounting a PCB, building a Raspberry Pi enclosure, or assembling a STEM kit, you'll find the fasteners you need here.
Shipped Australia-wide, these kits suit hobbyists, educators, and engineers alike. Brass, steel, and nylon options let you match the fastener to the job — electrical isolation, weight savings, or structural rigidity.
Metal Flat Key Shaft Flange Plate, Suitable For Using with Serial Bus Servo
SKU: WS-24985 | Brand: Waveshare
Metal Flat Key Shaft Flange Plate, Suitable For Using with Serial Bus Servo, Compatible With Various Transmission Parts Metal Flat Key Shaft Flange Plate Using with serial bus servo for...
Delivered by Wed 1 Jul
Aluminum Extrusion Corner Brace Support (for 20x20)
SKU: AF-1155 | Brand: Adafruit
A sturdy cast aluminium corner brace for joining 20×20mm aluminium extrusion at 90° angles. Stronger than extruded corner supports, with two mounting holes for a secure connection between extrusion pieces. Key Featur...
Delivered by Tue 30 Jun
Screw Terminal 3.5mm Pitch(2-Pin)
SKU: DF-FIT0181 | Brand: DFRobot
This is a high quality 2-pin screw terminal. Very useful when you want to connect 24-18AWG wires to your circuits. SPECIFICATIONS Rated voltage: 300V Rated current: 10A Contact resistence: ...
Delivered by Fri 19 Jun
Hex Standoff Threaded - #4-40, Aluminum, 2.375in. (60.33mm)
SKU: SF-PRT-15432 | Brand: SparkFun
These aluminum hex standoffs are 2.375in. (60.33mm) long and tapped for a 4-40 screw. These are great for mounting your board in an enclosure, or just getting it up off the table.Sold individually.Features: Screw, Thr...
Delivered by Fri 19 Jun
Aluminum Extrusion Double Corner Brace Support (for 20x20)
SKU: AF-1259 | Brand: Adafruit
A heavy-duty cast aluminium double corner brace for joining 20×20mm aluminium extrusion at 90° angles. Stronger than extruded corner supports, with four mounting holes (two per side) for a more secure and rigid connec...
Delivered by Tue 30 Jun
Nut - Metal (2-56)
SKU: SF-PRT-08995 | Brand: SparkFun
Description: These are standard nuts with 2-56 thread. For use with 2-56 machine screws and five button pad set listed below. Sold in single units.
Delivered by Fri 19 Jun
Screw - Phillips Head (3/8, 2-56)
SKU: SF-PRT-08993 | Brand: SparkFun
A standard Phillips head machine screw with 2-56 thread and a length of 9.5 mm (3/8"). Compatible with 2-56 nuts for securing panels, button pads, and small electronic assemblies. Specifications Head Type – Phillip...
Delivered by Fri 19 Jun
