Speakers

SKU: EC-RAP89814C | Brand: Elecrow

Raspberry Pi can not be used directly with the speaker, so this speaker is a built-in power amplifier dual-channel speaker, driver-free, USB power supply. Come with a volume decoder, it can adjust the volume. Note...

SKU: LB-LR0288 | Brand: Little Bird

A simple 5V active buzzer that generates a tone using its built-in oscillator. Just apply a DC voltage and it sounds — no additional signal generation or driver circuit required. Ideal for adding audible alerts, alarm...

SKU: LB-PT-SPEAKER | Brand: Little Bird

A compact, ultra-thin speaker ideal for portable electronics, embedded projects, and audio prototyping. Features a PH2.54 terminal connector with a 20 cm wire lead for easy integration. Specifications Power – 3 W ...

SKU: AF-3351 | Brand: Adafruit

Listen up! This 2.8" x 1.2" speaker is a great addition to any audio project where you need 4 ohm impedance and 3W or less of power. We particularly like this speaker as it is small...

SKU: LB-LS2202 | Brand: Little Bird

This compact Bluetooth amplifier board provides wireless audio playback with 5W per channel (10W total) output via dual PAM8403 amplifier chips. Stream music wirelessly from any Bluetooth 5.0 compatible device directl...

SKU: DF-FIT0502 | Brand: DFRobot

INTRODUCTION FIT0502(Stereo Enclosed Speaker) is a new passive speaker with JST PH2.0 interface. It is a perfect option for any DIY audio project which requires an 8 ohm impedance and 3W power. The suitable size ...

SKU: LB-SPEAKER | Brand: Little Bird

This breadboard-compatible speaker is a Little Bird exclusive, pre-wired with jumper wires and standard header pins so it plugs directly into a solderless breadboard. It's a quick, no-solder way to add audio output to...

SKU: SF-COM-21311 | Brand: SparkFun

A compact, thin speaker ideal for projects where space is tight. At just 28 mm in diameter and approximately 4 mm thick, it fits into enclosures and wearables where standard speakers won't. The pre-wired 180 mm cable ...

SKU: AF-1739 | Brand: Adafruit

This large enclosed piezo element (30 mm diameter) converts vibration to voltage and voltage to vibration, making it useful both as a buzzer for generating tones and as a sensor for detecting knocks and impacts. The e...

SKU: AF-1314 | Brand: Adafruit

A 3-inch (76.2 mm) speaker cone with 4 Ω impedance and 3 W power handling. Four mounting tabs spaced 60 mm apart make it easy to secure in enclosures or project housings. Pairs well with Class D amplifier boards for c...

SKU: LB-BK-SPEAKER | Brand: Little Bird

This bulk pack gives you 20 compact speakers ready for breadboard-based audio experiments, classroom kits and workshops. It is a Little Bird exclusive designed to make simple sound output quick to set up.Each speaker ...

SKU: AF-3923 | Brand: Adafruit

Hear the good news! This wee speaker is a great addition to any audio project where you need 8 ohm impedance and 1W or less of power. We particularly like this speaker as it is small and comes with nice skinny wires w...

SKU: AF-1785 | Brand: Adafruit

A medium surface transducer that turns any flat surface — tables, walls, panels — into a speaker. Unlike traditional cone speakers, a voice coil wrapped around a metal rod causes vibration that transfers directly to t...

SKU: AF-3346 | Brand: Adafruit

The Adafruit I2S 3W Stereo Speaker Bonnet adds high-quality digital audio output to any Raspberry Pi with a 2×20 GPIO header. Using the I2S digital sound standard, audio data goes directly to the onboard Class D ampli...

SKU: DF-FIT0449 | Brand: DFRobot

INTRODUCTION This speaker module is based on the 8002 speaker amplifier IC. It can be used as a buzzer and also play high quality audio. Volume output is controlled via the potentiomet...

SKU: LB-SPEAKER-WHITE | Brand: Little Bird

The speaker itself is 3.81m (1.5") in diameter and is perfect for any project where you need an 8Ω impedance, and are using 0.25W of power. The speakers are rated at 0.25W, with a maximum input of 0.5W (printed wat...

SKU: AF-1891 | Brand: Adafruit

Listen up! This 1.5" diameter speaker cone is the perfect addition to any audio project where you need an 8Ω impedance and are using 0.25W of power. The speakers are rated at 0.25W, with a maximum input of 0.5W (pr...

SKU: DF-DFR1173 | Brand: DFRobot

This compact voice prompt module integrates an intelligent MP3 playback chip with a 1 W speaker in a tiny 30 × 11 mm package. It supports MP3, WAV, and WMA hardware decoding with 16 MB of on-board storage that retains...

SKU: LB-BUZZER | Brand: Little Bird

This is a small buzzer for use with E-Textiles. Use 2 I/O pins on the Buzzer main board and create different noises based on the different frequency of I/O toggling. Loud enough to hear inside a pocket but not obtrusi...

SKU: SF-COM-09151 | Brand: SparkFun

A compact 0.5W speaker with 8 ohm impedance, small enough to fit inside robot builds, enclosures, and portable electronics projects. Suitable for audio output from amplifier boards, microcontrollers with DAC/PWM audio...