SparkFun

SKU: SF-BOB-10496 | Brand: SparkFun

This is a breakout board to allow simple access to the tightly pitched pins on the GS406 and GS407 GPS units. This board breaks out all of the necessary pins to a row of standard 0.1" spaced header to allow for easy b...

SKU: SF-WRL-12861 | Brand: SparkFun

This is a basic SMA (Sub-Miniature A) male to female connector cable. Each cable is 25cm (9.8") long and has a 50Ω impedance that can handle frequencies up to 17 GHz. The SMA connectors at each end are small enough...

SKU: SF-WRL-12847 | Brand: SparkFun

XBee radios are an awesome way to add wireless capability to your Arduino project and now it’s even easier with the SparkFun XBee Shield. The shield form-factor mates directly with any dev board that has an Arduino...

SKU: SF-PRT-10462 | Brand: SparkFun

Nylon standoffs for mounting PCBs in enclosures or elevating boards off work surfaces. These ¾" (19mm) long standoffs are tapped for 4-40 screws and sold in a pack of 10. Key Features Nylon Construction – Non-condu...

SKU: SF-PRT-10463 | Brand: SparkFun

Metal Hex Male/Female standoffs. #4-40 thread with 3/8" shank and 3/16" thread length. Can be stacked to create any length. Pack of 10

SKU: SF-SEN-12829 | Brand: SparkFun

If you’ve had ideas for a project that depends on the ability to sense different spectrums of visible light and react based on those measurements, the ISL29125 breakout board may be just what you need. The ISL29125 br...

SKU: SF-WRL-12823 | Brand: SparkFun

This is the SparkFun RFM69 Breakout, a small piece of tech that breaks out all the pins available on the RFM69HCW module as well as making the transceiver easy to use. The RFM69HCW is an inexpensive and versatile r...

SKU: SF-DEV-10406 | Brand: SparkFun

This board is an evaluation platform for the SM130 RFID module. It includes an XBee header, PCB trace antenna, and has the layout to be used as a shield for an Arduino. There is a small prototyping area as wel...

SKU: SF-PRT-10401 | Brand: SparkFun

A simple single-cell LiPo/Li-Ion battery charger based on the MCP73831T charge controller IC. Connect a battery via the JST connector, plug in a Mini-USB cable for power, and the board handles charging automatically w...

SKU: SF-SEN-12784 | Brand: SparkFun

This is the SparkFun “Time-of-Flight” Range Finder, a breakout for the VL6180 distance sensor. Unlike most distance sensors that rely reflected light intensity or reflected angles to determine range, the VL6180 use...

SKU: SF-PRT-12791 | Brand: SparkFun

This is a 2x23 pin male PTH header. This piece is in the common configuration for Beaglebone Black headers that can be broken apart to form smaller header formations. Each pin has a spacing of 0.1" in between each oth...

SKU: SF-SEN-12785 | Brand: SparkFun

This is the SparkFun “Time-of-Flight” Range Finder, a sensor board for the VL6180 distance sensor. Unlike most distance sensors that rely on reflected light intensity or reflected angles to determine range, the VL6180...

SKU: SF-PRT-10370 | Brand: SparkFun

This is a simple five wire cable. Great for jumping from board to board or just about anything else. There is a 5-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway header...

SKU: SF-PRT-10364 | Brand: SparkFun

This is a simple four wire cable. Great for jumping from board to board or just about anything else. There is a 4-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway header...

SKU: SF-PRT-10369 | Brand: SparkFun

A 6" (15 cm) four-wire jumper cable with 4-pin JST RE connectors on both ends, designed for board-to-board connections on standard 0.1" (2.54 mm) pitch headers. Specifications Wires – 4 Connector – 4-pin JST RE on...

SKU: SF-PRT-10368 | Brand: SparkFun

A simple 3-pin jumper wire with JST RE connectors on both ends, designed for standard 0.1" (2.54 mm) breakaway headers. Ideal for board-to-board connections, sensor hookups, and general prototyping. Specifications ...

SKU: SF-PRT-10367 | Brand: SparkFun

This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers...

SKU: SF-PRT-10365 | Brand: SparkFun

This is a simple five wire cable. Great for jumping from board to board or just about anything else. There is a 5-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway hea...

SKU: SF-PRT-10366 | Brand: SparkFun

A simple 6-pin jumper wire cable with JST RE connectors on both ends. Perfect for board-to-board connections using standard 0.1" (2.54mm) breakaway headers. At 4" (100mm) long, it keeps wiring tidy in compact builds. ...

SKU: SF-DEV-12761 | Brand: SparkFun

The SparkFun microSD Shield gives your Arduino mass-storage capability via a microSD card slot, making it ideal for data-logging and projects that need to read or write files. Communication with the microSD card uses...