SparkFun

SKU: SF-PRT-16538 | Brand: SparkFun

Poke Home Connectors have been featured on a number of our boards over the last few years by providing a simple screw-terminal-type connector for easy wire connection purposes. Similar to screw terminals, Poke Home Co...

SKU: SF-COM-16347 | Brand: SparkFun

The WS2812B (or "NeoPixel") may look like a common 5050-sized (5x5mm) SMD LED, but there’s actually an integrated control circuit embedded inside there too. Sometimes you don't need 10 or even 50, maybe you need a who...

SKU: SF-DEV-16260 | Brand: SparkFun

The Leopard Imaging Camera is a wide-angle camera module designed specifically for the NVIDIA Jetson Nano Developer Kit. With a 136° field of view, Sony IMX219 8.08 MP colour sensor, and CSI-2 MIPI 2-lane interface, i...

SKU: SF-PRT-15900 | Brand: SparkFun

You'll have no need for a screwdriver with this terminal! This is a 3-pin Latch Terminal with 5mm pitch pins. Each pin is rated up to 250V @ 11A and will line up well with the standard 0.1" spacing. Please note that t...

SKU: SF-PRT-15899 | Brand: SparkFun

You'll have no need for a screwdriver with this terminal! This is a 3-pin Latch Terminal with 5mm pitch pins. Each pin is rated up to 250V @ 11A and will line up well with the standard 0.1" spacing. Please note that t...

SKU: SF-PRT-15898 | Brand: SparkFun

You'll have no need for a screwdriver with this terminal! This is a 2-pin Latch Terminal with 5mm pitch pins. Each pin is rated up to 250V @ 11A and will line up well with the standard 0.1" spacing. Please note that t...

SKU: SF-DEV-15801 | Brand: SparkFun

The SparkFun Power Delivery Board uses the STMicroelectronics STUSB4500 controller to negotiate USB Power Delivery (PD) contracts with compatible chargers and adapters. Instead of being limited to 5 V from a standard ...

SKU: SF-BOB-15932 | Brand: SparkFun

The SparkFun Qwiic Button simplifies adding a tactile button to your I2C project. It handles debouncing, pull-up resistors, and polling internally, so you can focus on your application. A built-in red LED provides vis...

SKU: SF-PRT-15700 | Brand: SparkFun

A 4-pin right-angle ATX connector designed to mate with the standard 4-pin peripheral power connector commonly found on ATX power supplies. Through-hole (PTH) mounting for secure PCB attachment. Specifications Pins...

SKU: SF-DEV-15423 | Brand: SparkFun

Looking for a super small microcontroller to use with the Qwiic eco-system? The SparkFun Qwiic Micro is molded to fit our standard 1"x1" Qwiic standard size which makes it one of our smallest micro-controller offering...

SKU: SF-SEN-15776 | Brand: SparkFun

The LIDAR-Lite v4 LED sensor is the next step in the LIDAR-Lite line. A small, lightweight, low-power optical ranging sensor. It's the first to incorporate ANT profile wireless networking technology into an optical se...

SKU: SF-DEV-15573 | Brand: SparkFun

The SparkFun ATECC508A Cryptographic Co-processor Breakout allows you to easily add strong authentication security to your IoT node, edge device, or embedded system. It includes two Qwiic ports for plug and play funct...

SKU: SF-WRL-15574 | Brand: SparkFun

The SparkFun Thing Plus - Artemis combines the powerful Artemis module with the popular Thing Plus footprint and Feather-compatible pinout. With 1MB flash, 384KB RAM, Bluetooth, and a built-in digital MEMS microphone,...

SKU: SF-WRL-15454 | Brand: SparkFun

The XBee3 Thing Plus is an ultra-capable and easy way for getting into wireless device development. The combination of XBee and Qwiic in a space-conscious design represents a much-needed update to our XBee offering. W...

SKU: SF-WRL-15435 | Brand: SparkFun

The XBee3 Thing Plus is an ultra capable and easy way for getting into wireless device development. The combination of XBee and Qwiic in a space conscious design represents a much needed update to our XBee offering. W...

SKU: SF-DEV-15442 | Brand: SparkFun

The RedBoard Artemis ATP is affectionately called 'All the Pins!' at SparkFun. The Artemis module has 48 GPIO and this board breaks out absolutely every one of them in a familiar Mega like form factor. What's with the...

SKU: SF-DEV-15443 | Brand: SparkFun

The SparkFun RedBoard Artemis Nano packs the powerful Artemis module into a minimal, 0.8 mm thick PCB with USB-C programming, on-board LiPo battery charging, and a Qwiic connector. It's a compact, modern replacement f...

SKU: SF-WRL-15484 | Brand: SparkFun

The SparkFun Artemis Module is a compact 10 × 15 mm wireless module built around the Ambiq Apollo3 Cortex-M4F processor with BLE 5.0. Running at 48 MHz (with 96 MHz turbo mode), it draws as little as 6 µA per MHz — ma...

SKU: SF-DEV-15270 | Brand: SparkFun

The gator:log is the perfect data logging tool for your next experiment. With the automation of the data collection process, gone are the days of rushing around with a pen and composition notebook to simultaneously re...

SKU: SF-CAB-15428 | Brand: SparkFun

A USB 2.0 Type-A to Micro-B cable with reversible connectors on both ends. No more fumbling with orientation — both the USB-A and Micro-B plugs insert correctly either way up, bringing USB-C convenience to your Micro-...