SparkFun

SKU: SF-GPS-15136 | Brand: SparkFun

With GPS you are able to know where you are, where you’re going, and how to get there anywhere on Earth within 30 seconds. This means the higher the accuracy the better! GPS Real Time Kinematics (RTK) has mastered dia...

SKU: SF-SEN-15050 | Brand: SparkFun

The SparkFun Triad Spectroscopy Sensor combines three AS7265x spectral sensors with onboard UV, visible, and IR LEDs to measure light across 18 individual frequencies — from 410 nm (UV) to 940 nm (IR). It brings light...

SKU: SF-DEV-14285 | Brand: SparkFun

The SparkFun Wireless Motor Driver Shield is designed to make connecting motors, sensors and other components to your Arduino-based project as fast and easy as possible. The heart of the Wireless Motor Driver Shield i...

SKU: SF-SEN-11862 | Brand: SparkFun

RFID (radio-frequency identification) is the wireless non-contact use of radio-frequency electromagnetic fields, for the purposes of identifying and tracking tags attached to objects. This is the ID-3LA, a very simple...

SKU: SF-GPS-13670 | Brand: SparkFun

The GP-735 is a slim, ultra-high performance, easy to use GPS smart antenna receiver. With -162dBm tracking sensitivity and only 29 second cold start time, the GP735 is a tiny, yet powerful, piece of tech. The slim de...

SKU: SF-DEV-13664 | Brand: SparkFun

If you’re ready to step your Arduino game up from older 8-bit/16MHz microcontrollers, the SparkFun SAMD21 Mini Breakout is a great landing spot. The SAMD21 Mini Breakout is a Pro Mini-sized breakout for the Atmel ATSA...

SKU: SF-KIT-13198 | Brand: SparkFun

This it the SparkFun RFID Starter Kit, an all-in-one kit that offer everything you need to get your next RFID project off the ground. This kit includes our USB RFID Reader, ID-12LA RFID module, and two 125kHz RFID car...

SKU: SF-SEN-13162 | Brand: SparkFun

The ZX Distance and Gesture Sensor is a touchless sensor that is capable of looking for simple gestures. Developed in conjunction with XYZ Interactive, the sensor uses their GestureSense® technology to recognize the d...

SKU: SF-BOB-10496 | Brand: SparkFun

This is a breakout board to allow simple access to the tightly pitched pins on the GS406 and GS407 GPS units. This board breaks out all of the necessary pins to a row of standard 0.1" spaced header to allow for easy b...

SKU: SF-BOB-12731 | Brand: SparkFun

This is the SparkFun USB to Serial Breakout for the FT232RL, a small board with a built in USB to serial UART interface. This little breakout is built around the FT232RL IC from FTDI, with an internal oscillator, EEPR...

SKU: SF-WRL-12569 | Brand: SparkFun

This is the XBee WiFi Module with RP-SMA connector from Digi. XBee WiFi embedded RF modules provide simple serial to IEEE 802.11 connectivity. By bridging the low-power/low-cost requirements of wireless device network...

SKU: SF-DEV-09713 | Brand: SparkFun

The new version of the UBW32 now uses the PIC32MX795 IC. Based on the work of Brian Schmalz, the UBW32 is a small development board for the new PIC32MX795 32-bit CPU from Microchip. The UBW32 is breadboard frien...

SKU: SF-WIG-09555 | Brand: SparkFun

This board allows you to interface with your car’s OBD-II bus. It provides you a serial interface using the ELM327 command set and supports all major OBD-II standards such as CAN and JBUS. The board also provides a fo...

SKU: SF-GPS-15005 | Brand: SparkFun

Built around the u-blox NEO-M8P-2, this breakout brings high-accuracy GNSS and GPS positioning with RTK support to the Qwiic ecosystem. It’s designed for applications where standard GPS accuracy isn’t enough, with RTK...

SKU: SF-GPS-23288 | Brand: SparkFun

Bring high-precision GNSS positioning to your project with the u-blox NEO-F9P engine and dual-band L1/L5 reception. L5 signals sit in the protected ARNS band, helping reduce RF interference and improve reliability in ...

SKU: SF-GPS-28019 | Brand: SparkFun

This high-precision positioning breakout is built around the Quectel LG580P GNSS module, giving projects centimetre-level RTK positioning plus instantaneous heading when used with two GNSS antennas. Unlike systems tha...

SKU: SF-WRL-17743 | Brand: SparkFun

The SparkFun Thing Plus ESP32-S2 WROOM is a Feather form-factor development board built around Espressif's ESP32-S2 SoC with integrated 2.4 GHz Wi-Fi. It features enhanced security over the original ESP32, including t...

SKU: SF-SEN-15103 | Brand: SparkFun

The Sensirion SPS30 is a compact, high-quality optical particle sensor that uses laser scattering and Sensirion's innovative contamination-resistance technology for superior binning and particle measurement. It measur...

SKU: SF-BOB-09822 | Brand: SparkFun

This is the newest revision and fixes issues with the last board. This breakout board pairs an SP3485 RS-485 transceiver with an FT232RL USB UART IC to convert a USB stream to RS-485. The SP3485 is a half-duplex tr...

SKU: SF-SEN-14351 | Brand: SparkFun

The SparkFun AS7263 breakout brings near-infrared (NIR) spectroscopy to your microcontroller projects. The sensor measures six discrete NIR wavelengths, allowing you to characterise how different materials absorb and ...