Sound & Audio
Browse our range of sound and audio gear, including speakers, audio plugs, jacks, connectors, and cables in common formats like 3.5mm, 6.35mm, and TRRS. Whether you're building a DIY synth, wiring up a classroom project, or prototyping an audio circuit, you'll find the parts you need.
Ideal for makers, STEM educators, and audio hobbyists across Australia. We stock terminal block adapters, in-line jacks, and stereo cables for quick prototyping and permanent installations alike, with fast shipping Australia-wide.
SparkFun Sound Detector (with Headers)
SKU: SF-SEN-14262 | Brand: SparkFun
The SparkFun Sound Detector is a small and very easy-to-use audio sensing board with three different outputs. The Sound Detector not only provides an audio output, but also a binary indication of the presence of sound...
Delivered by Tue 23 Jun
WAV Trigger
SKU: SF-WIG-13660 | Brand: SparkFun
The WAV Trigger is a unique high-fidelity polyphonic audio player with surprising capabilities. Supporting up to 2048 uncompressed 16-bit, 44.1kHz wav files – the same quality as an audio CD – the WAV Trigger can p...
Delivered by Fri 12 Jun
SparkFun Spectrum Shield
SKU: SF-DEV-13116 | Brand: SparkFun
The SparkFun Spectrum Shield splits a stereo audio input into 7 frequency bands per channel using two MSGEQ7 graphic equaliser ICs. Read the amplitude of each band via your Arduino's ADC to create sound-reactive proje...
Delivered by Fri 12 Jun
SparkFun Electret Microphone Breakout
SKU: SF-BOB-12758 | Brand: SparkFun
The SparkFun Electret Microphone Breakout pairs a small electret microphone capsule with a 60× OPA344 op-amp preamplifier, making it easy to detect sound with a microcontroller's analogue-to-digital converter. Pick up...
Delivered by Fri 12 Jun
Gravity: Analog Sound Sensor For Arduino
SKU: DF-DFR0034 | Brand: DFRobot
This is a new Arduino compatible Analog Sound Sensor. Sound Sensor is typically used in detecting the loudness in ambient, the Arduino can collect its output signal and actuate accordingly. You may use it to make some...
Delivered by Fri 12 Jun
2 x 45mm 4ohm 4Ω 3W Stereo Speaker with PH2.0 Plug
SKU: LB-LS6972x2 | Brand: Little Bird
A compact stereo speaker pair for small audio projects, handheld devices, and embedded builds. Each 45mm driver is rated at 4Ω and 3W, delivering clear, balanced sound in a slim form factor. Pre-wired with a PH2.0 plu...
Delivered by Fri 12 Jun
Adafruit PCM5100 I2S DAC with Line Level Output - 100dB SNR
SKU: AF-6251 | Brand: Adafruit
The Adafruit PCM5100 I2S DAC converts digital I2S audio into clean, high-quality stereo line-level output through a 3.5mm jack. With 100dB signal-to-noise ratio and no MCLK or I2C configuration required, simply pipe I...
Delivered by Thu 2 Jul
Adafruit STEMMA Audio Amp - Mono 2.5W Class D - PAM8302
SKU: AF-5647 | Brand: Adafruit
The Adafruit STEMMA Audio Amp is a compact mono Class D amplifier based on the PAM8302 chip, delivering up to 2.5W into 4 Ω speakers from a 2.0–5.5V DC supply. With over 90% efficiency at half a watt into 8 Ω, it's id...
Delivered by Thu 2 Jul
3.5mm (1/8) Stereo Audio Plug Terminal Block
SKU: AF-2790 | Brand: Adafruit
A 3.5 mm (1/8") stereo (TRS) audio plug with screw terminal connections — no soldering required. Use stranded or solid-core wire and a small screwdriver to create custom audio cables, breakouts, and test leads. This ...
Delivered by Fri 12 Jun
3.5mm (1/8) 4-Pole (TRRS) Audio Jack Terminal Block
SKU: AF-2915 | Brand: Adafruit
A 3.5 mm (1/8") 4-pole TRRS audio jack with screw terminal connections — no soldering required. Use stranded or solid-core wire and a small screwdriver to create custom audio wiring jigs, breakouts, and test setups. ...
Delivered by Fri 12 Jun
SparkFun MP3 Player Shield
SKU: SF-DEV-12660 | Brand: SparkFun
The SparkFun MP3 Player Shield is an awesome MP3 decoder with the capabilities of storing music files onto a run-of-the-mill microSD card, thus giving you the ability toadd music or sound effects to any project. Wi...
Delivered by Fri 12 Jun
386AMP Audio Amplifier Module (Arduino compatible)
SKU: DF-DFR0064 | Brand: DFRobot
The DFRobot 386AMP audio amplifier module is based on the LM386 low-voltage audio power amplifier IC. With a fixed voltage gain of 26 dB (20× amplification) and static power consumption of only 24 mW at 6V, it's well ...
Delivered by Fri 12 Jun
Fermion: MEMS Microphone Module
SKU: DF-SEN0487 | Brand: DFRobot
This tiny MEMS microphone has an amplifier gain of 66. When there is no sound detected, it outputs voltage around 0.66*VCC. When speaking, you can easily get the acoustic waveform by ADC sampling. The module can be us...
Delivered by Fri 12 Jun
DAC Audio Decoder Board for Raspberry Pi 3B+/ 4B
SKU: DF-DFR0941 | Brand: DFRobot
Related Product: Raspberry Pi Power Filter BoardThis Raspberry Pi DAC Audio Decoder Board supports I2S/DSD/coaxial input, analog/coaxial/optical/I2S output, 384K/32Bit decoding function and unique DSD clock de-jitter....
Delivered by Tue 23 Jun
Bass Treble Bluetooth Amplifier-50W*2
SKU: DF-DFR0806 | Brand: DFRobot
With bass and treble tone independent control, this powerful Bluetooth Amplifier has AM interference and filtering function that makes the board THD as low as 0.1% even when working for a long time at large power outp...
Delivered by Fri 12 Jun
High Power Bluetooth Power Amplifier Board
SKU: DF-DFR0777 | Brand: DFRobot
INTRODUCTIONStarting to build your dream Speakers with this Bluetooth Power Amplifier board! This cost-effective high power Bluetooth amplifier board features 100W output power, a volume control button, Bluetooth 5.0 ...
Delivered by Tue 23 Jun
Audio BLE/SPP Pass-through Module - Bluetooth 5.0
SKU: DF-DFR0781 | Brand: DFRobot
INTRODUCTIONThis Bluetooth module features Bluetooth/U-disk/TF-card playback, and Bluetooth call function, supporting simple and clear serial port control function, BLE pass-through, and SPP pass-through functions. Th...
Delivered by Tue 23 Jun
Gravity: UART MP3 Voice Module
SKU: DF-DFR0534 | Brand: DFRobot
Do you always feel like the DIY work is boring, not attractive or no vitality when you design it by yourself? This new Gravity MP3 voice module produced by DFRobot can solve these problems. This module can store 8MB...
Delivered by Tue 23 Jun
Rotary Potentiometer - 100k Ohm, Logarithmic (Panel Mount)
SKU: SF-COM-14624 | Brand: SparkFun
A panel-mount rotary potentiometer with a 100 kΩ logarithmic taper. Turn the knob and the resistance changes smoothly — ideal for volume controls and other audio applications where a logarithmic response matches human...
Delivered by Tue 23 Jun
Stereo 20W Class D Audio Amplifier - MAX9744
SKU: AF-1752 | Brand: Adafruit
A compact Class D stereo amplifier breakout based on the Maxim MAX9744. It drives two channels of 4–8 Ω speakers at up to 20 W each, powered from 4.5–14 V DC. With up to 93% efficiency, it runs cool without heatsinks ...
Delivered by Thu 2 Jul