Sound & Audio
Browse our range of sound and audio gear, including speakers, audio plugs, jacks, connectors, and cables in common formats like 3.5mm, 6.35mm, and TRRS. Whether you're building a DIY synth, wiring up a classroom project, or prototyping an audio circuit, you'll find the parts you need.
Ideal for makers, STEM educators, and audio hobbyists across Australia. We stock terminal block adapters, in-line jacks, and stereo cables for quick prototyping and permanent installations alike, with fast shipping Australia-wide.
Electret Microphone Amplifier - MAX9814 with Auto Gain Control
SKU: AF-1713 | Brand: Adafruit
Add an ear to your project with this well-designed electret microphone amplifier with AGC. This fully assembled and tested board comes with a 20-20KHz electret microphone soldered on. For the amplification, we use th...
Delivered by Fri 12 Jun
Adafruit STEMMA Piezo Driver Amp - PAM8904
SKU: AF-5791 | Brand: Adafruit
The Adafruit STEMMA Piezo Driver Amp uses the PAM8904 switched-capacitor driver to amplify signals for piezo elements at up to 300 kHz. With bridge-tied load (BTL) output and up to 3× voltage multiplication, it can de...
Delivered by Thu 2 Jul
Stereo 3.7W Class D Audio Amplifier - MAX98306
SKU: AF-987 | Brand: Adafruit
This incredibly small stereo amplifier is surprisingly powerful - able to deliver 2 x 3.7W channels into 3 ohm impedance speakers. Inside the miniature chip is a class D controller, able to run from 2.7V-5.5VDC. Since...
Delivered by Thu 2 Jul
SparkFun Sound Detector (with Headers)
SKU: SF-SEN-14262 | Brand: SparkFun
The SparkFun Sound Detector is a small and very easy-to-use audio sensing board with three different outputs. The Sound Detector not only provides an audio output, but also a binary indication of the presence of sound...
Delivered by Tue 23 Jun
SparkFun Spectrum Shield
SKU: SF-DEV-13116 | Brand: SparkFun
The SparkFun Spectrum Shield splits a stereo audio input into 7 frequency bands per channel using two MSGEQ7 graphic equaliser ICs. Read the amplitude of each band via your Arduino's ADC to create sound-reactive proje...
Delivered by Fri 12 Jun
Gravity: Analog Sound Sensor For Arduino
SKU: DF-DFR0034 | Brand: DFRobot
This is a new Arduino compatible Analog Sound Sensor. Sound Sensor is typically used in detecting the loudness in ambient, the Arduino can collect its output signal and actuate accordingly. You may use it to make some...
Delivered by Fri 12 Jun
Wired Miniature Electret Microphone
SKU: AF-1935 | Brand: Adafruit
That's one tiny microphone! At about the size of a mature aphid, this wired Electret Microphone is perfect for your FONA. This microphone's very similar to our PCB-mount Elecret Microphone but is significantly sma...
Delivered by Fri 12 Jun
Gravity: Analog Sound Level Meter
SKU: DF-SEN0232 | Brand: DFRobot
The Gravity Analog Sound Level Meter is an Arduino-compatible decibel meter that accurately measures environmental noise levels. It uses an instrumentation-grade circuit with a low-noise microphone for high-precision ...
Delivered by Tue 23 Jun
SparkFun Sound Detector
SKU: SF-SEN-12642 | Brand: SparkFun
The SparkFun Sound Detector is a small and very easy to use audio sensing board with three different outputs. The Sound Detector not only provides an audio output, but also a binary indication of the presence of so...
Delivered by Tue 23 Jun
Stereo 2.1W Class D Audio Amplifier - TPA2012
SKU: AF-1552 | Brand: Adafruit
This incredibly small stereo amplifier is surprisingly powerful - able to deliver 2 x 2.1W channels into 4 ohm impedance speakers (@ 10% THD). Inside the miniature chip is a class D controller, able to run from 2.7V-5...
Delivered by Thu 2 Jul
