Sound & Audio
Browse our range of sound and audio gear, including speakers, audio plugs, jacks, connectors, and cables in common formats like 3.5mm, 6.35mm, and TRRS. Whether you're building a DIY synth, wiring up a classroom project, or prototyping an audio circuit, you'll find the parts you need.
Ideal for makers, STEM educators, and audio hobbyists across Australia. We stock terminal block adapters, in-line jacks, and stereo cables for quick prototyping and permanent installations alike, with fast shipping Australia-wide.
Stereo Bluetooth Amplifier Board
SKU: DF-DFR0675-EN | Brand: DFRobot
This is a small size and cost-effective Bluetooth 5.0 digital amplifier module with a volume adjustment function. It can connect to two speakers and match a wide variety of high-power speakers (40W-200W). This boar...
Delivered by Thu 13 Aug
Electret Microphone Amplifier - MAX9814 with Auto Gain Control
SKU: AF-1713 | Brand: Adafruit
Add an ear to your project with this well-designed electret microphone amplifier with AGC. This fully assembled and tested board comes with a 20-20KHz electret microphone soldered on. For the amplification, we use th...
Delivered by Thu 13 Aug
Electret Microphone Amplifier - MAX4466 with Adjustable Gain
SKU: AF-1063 | Brand: Adafruit
A well-designed electret microphone amplifier breakout built around the Maxim MAX4466 op-amp, specifically engineered for microphone amplification with excellent power supply noise rejection. The board comes fully ass...
Delivered by Thu 13 Aug
Sound Detection and Microphone Module
SKU: LB-LR0003 | Brand: Little Bird
This sound detection and microphone module provides both analogue and digital outputs for detecting sound with a microcontroller. The analogue output (AO) delivers a real-time voltage signal proportional to sound inte...
Delivered by Thu 13 Aug
Audio Stereo Decoder Module Board 3.3V - 5V
SKU: LB-LS1891 | Brand: Little Bird
HS1891 DAC Module CJMCU-1334 UDA1334A I2S DAC Audio Stereo Decoder Module Board 3.3V - 5V Feature: This fully-featured UDA1334A I2S Stereo DAC breakout is a perfect match for any I2S-output audio interface. ...
Delivered by Thu 13 Aug
Gravity: Analog Sound Sensor For Arduino
SKU: DF-DFR0034 | Brand: DFRobot
This is a new Arduino compatible Analog Sound Sensor. Sound Sensor is typically used in detecting the loudness in ambient, the Arduino can collect its output signal and actuate accordingly. You may use it to make some...
Delivered by Thu 13 Aug
Fermion: MEMS Microphone Module
SKU: DF-SEN0487 | Brand: DFRobot
This tiny MEMS microphone has an amplifier gain of 66. When there is no sound detected, it outputs voltage around 0.66*VCC. When speaking, you can easily get the acoustic waveform by ADC sampling. The module can be us...
Delivered by Thu 13 Aug
Adafruit Silicon MEMS Microphone Breakout - SPW2430
SKU: AF-2716 | Brand: Adafruit
The Adafruit SPW2430 Silicon MEMS Microphone Breakout is a compact, low-cost microphone module that detects sound and converts it to an analog voltage — no external bias resistor or amplifier needed. With a frequency ...
Delivered by Thu 13 Aug
SparkFun gator:microphone - micro:bit Accessory Board
SKU: SF-SEN-15289 | Brand: SparkFun
The SparkFun gator:microphone is a micro:bit Accessory Board that integrates an electret microphone into SparkFun's gator:bit series of gator-clippable accessories, enabling it to be easily interfaced with the micro:b...
Delivered by Thu 13 Aug
VS1053 Codec + MicroSD Breakout - MP3/WAV/MIDI/OGG Play + Record [v4]
SKU: AF-1381 | Brand: Adafruit
This breakout board is the ultimate companion for the VLSI VS1053B DSP codec chip. The VS1053 can decode a wide variety of audio formats such as MP3, AAC, Ogg Vorbis, WMA, MIDI, FLAC, WAV (PCM and ADPCM). It can al...
Delivered by Thu 13 Aug