Sewable LEDs

SKU: KI-2726 | Brand: Kitronik

Ultra-slim sewable LED boards from Kitronik in sakura lilac, designed for e-textile and wearable electronics projects. Each LED board runs from a 3V coin cell battery and illuminates continuously when powered. The dou...

SKU: AF-1559 | Brand: Adafruit

So, you want lots and lots of NeoPixels? And you want them for less? Not a problem! Here's a sheet of Flora NeoPixels fresh from the (reflow) oven. Cut them off as you need 'em and save a pretty penny while you're ...

SKU: AF-1850 | Brand: Adafruit

Add a touch of sparkle to your wearables with the Adafruit Gemma Sequin Starter Pack. This beginner-friendly kit includes a GEMMA V2 sewable microcontroller, warm white LED sequins, conductive thread, needles, and a c...

SKU: AF-1126 | Brand: Adafruit

Tin-plated brass sewable snaps in a compact 5 mm diameter, ideal for wearable electronics. Solder one side to a PCB pad and sew the other to your project with conductive thread for a detachable electrical connection. ...

SKU: AF-1285 | Brand: Adafruit

The Adafruit Beginner LED Sewing Kit has everything you need to start stitching glowing circuits with conductive thread. No soldering or microcontroller required — the included candle-flicker LEDs twinkle automaticall...

SKU: SF-DEV-09267 | Brand: SparkFun

The LilyPad Accelerometer is a three-axis accelerometer based on the Analog Devices ADXL335, designed for the LilyPad wearable e-textile system. It detects joint movement, inclination, and vibration, outputting 0–3 V ...

SKU: AF-653 | Brand: Adafruit

This sewable CR2032 battery holder makes it easy to add power to wearable electronics projects. Two small 1mm holes in the metal connection tabs are perfectly sized for a #5 or smaller needle to pass through, so you c...

SKU: AF-5480 | Brand: Adafruit

Sure, we've got all sorts of diffused bare LEDs in all sorts of colors and sizes. But have you ever laid your peepers on this spooky set of skull-shaped LEDs? These look too cute and charming and w...

SKU: SF-DEV-13735 | Brand: SparkFun

Blink any color you need! Use the LilyPad RGB LED board as a simple indicator, or by pulsing the red, green, and blue channels, you can produce a broad variety of colors. Each of the colors in the RGB LED are connecte...

SKU: PI-TEK002 | Brand: Pimoroni

A tiny, vibrating motor, easily attachable to paper or fabric! Just connect 3-5V across it, polarity doesn't matter, and it'll BUUUUZZZZZZ!!! The voltage (and hence current) supplied from LIR2032 recharge...

SKU: AF-3781 | Brand: Adafruit

You're at New York's hottest cyberpunk club is Near Field Commune(ication), and it's got everything, Collin's wondrous, mind-blowing, heart-stirring Pulse Room, and more! And you are dressed to the cyber-...

SKU: SF-DEV-08463 | Brand: SparkFun

This is a small buzzer for the LilyPad system. Use 2 I/O pins on the LilyPad main board and create different noises based on the different frequency of I/O toggling. Loud enough to hear inside a pocket but not obtrusi...

SKU: SF-PRT-11214 | Brand: SparkFun

MOSFETs are awesome. They’re like a switch that you flip electronically! This SparkFun MOSFET Power Controller makes it easy to switch a battery supply on and off using your favorite microcontroller. The board also ha...

SKU: AF-6195 | Brand: Adafruit

A warm-white LED filament shaped as the letter "E", made from COB (chip on board) LEDs — the same technology found in Edison-style LED bulbs. Dozens of micro LED diodes are bonded onto a thin metal backing and coated ...

SKU: AF-6196 | Brand: Adafruit

A warm-white LED filament shaped as the letter "F", made from COB (chip on board) LEDs — the same technology found in Edison-style LED bulbs. Dozens of micro LED diodes are bonded onto a thin metal backing and coated ...

SKU: AF-6197 | Brand: Adafruit

A warm-white LED filament shaped as the letter "G", made from COB (chip on board) LEDs — the same technology found in Edison-style LED bulbs. Dozens of micro LED diodes are bonded onto a thin metal backing and coated ...

SKU: AF-6201 | Brand: Adafruit

A warm-white LED filament shaped as the letter "J", made from COB (chip on board) LEDs — the same technology found in Edison-style LED bulbs. Dozens of micro LED diodes are bonded onto a thin metal backing and coated ...

SKU: AF-6202 | Brand: Adafruit

A warm-white LED filament shaped as the letter "K", made from COB (chip on board) LEDs — the same technology found in Edison-style LED bulbs. Dozens of micro LED diodes are bonded onto a thin metal backing and coated ...

SKU: AF-6203 | Brand: Adafruit

A warm-white LED filament shaped as the letter "L", made from COB (chip on board) LEDs — the same technology found in Edison-style LED bulbs. Dozens of micro LED diodes are bonded onto a thin metal backing and coated ...

SKU: AF-6205 | Brand: Adafruit

A warm-white LED filament shaped as the letter "N", made from COB (chip on board) LEDs — the same technology found in Edison-style LED bulbs. Dozens of micro LED diodes are bonded onto a thin metal backing and coated ...