Prototyping

SKU: SF-PRT-27908 | Brand: SparkFun

This is a straightforward 3-pin male through-hole header for adding standard pin connections to a PCB, breakout board or prototype.The pins use the common 0.1" spacing, making the header suitable for breadboard-friend...

SKU: SF-PRT-27907 | Brand: SparkFun

A compact straight pin header for adding a simple 3-position male connection to a through-hole PCB or prototyping layout. The pins use the common 0.1" spacing, making it easy to match with many standard electronics pr...

SKU: SF-PRT-27906 | Brand: SparkFun

This single-row female header provides 20 straight receptacles on standard 0.1 inch (2.54 mm) spacing, making it useful for prototyping, repairs and custom board connections.The strip can be cut down to the length you...

SKU: SF-PRT-28382 | Brand: SparkFun

This is a single-row strip of straight male breakaway header pins, useful for adding standard through-hole connections to development boards and maker projects.The header uses standard 0.1" (2.54mm) spacing and comes ...

SKU: SF-PRT-28381 | Brand: SparkFun

This is a single-row straight male header with 14 breakaway pins on standard 0.1 inch (2.54mm) spacing. It is suited to through-hole prototyping, module headers and breadboard-friendly maker projects.The 14x1 format i...

SKU: SF-PRT-28872 | Brand: SparkFun

This male header strip gives you 14 gold-plated pins for making custom connections on PCBs, prototypes and general electronics projects.The double insulated header is designed as a break-to-fit strip, so you can cut i...

SKU: SF-PRT-29760 | Brand: SparkFun

This is a single row of 20 male header pins for prototyping, board-to-board connections, and adding plug-in pins to PCBs or maker projects.The pins use standard 0.1" (2.54mm) spacing, making them suitable for common b...

SKU: SF-PRT-30218 | Brand: SparkFun

This 6-pin male header is a simple, reliable connector for linking components, boards or cables in electronics projects.The right-angle layout routes the pins parallel to your PCB, making it useful for low-profile bui...

SKU: SF-PRT-21505 | Brand: SparkFun

This 12-position screw terminal block is a simple way to make secure wire connections on a PCB or prototyping board. Each position uses a screw clamp, making it handy for bringing external wiring into a circuit withou...

SKU: SF-PRT-28385 | Brand: SparkFun

This is a simple single-row female header socket with 14 holes, suitable for standard 0.1 inch prototyping layouts.Use it for removable connections on perfboard, custom PCBs, breakout boards, shields or other maker pr...

SKU: LB-LS3507 | Brand: Little Bird

This 2×20 pin tall female header extends the reach of any board with a standard 40-pin GPIO layout, including the Raspberry Pi, Google Coral, and NVIDIA Jetson. At 16 mm tall with standard 0.1″ (2.54 mm) spacing, it p...

SKU: AF-562 | Brand: Adafruit

This potentiometer is a two-in-one, good in a breadboard or with a panel. It's a fairly standard linear taper 10K ohm potentiometer, with a grippy shaft. It's smooth and easy to turn, but not so loose that it will ...

SKU: EC-SMI3231DS | Brand: Elecrow

DS3231 is a low-cost, extremely accurate I2C real-time clock (RTC), with an integrated temperature-compensated crystal oscillator (TCXO) and crystal. Compared to the DS1302 solution, the DS3231 has many advantages, it...

SKU: TB-ZT2298 | Brand: Little Bird

The 2N2222A is a widely used general-purpose NPN bipolar junction transistor (BJT) in a TO-92 package. With a maximum collector current of 800 mA and a collector-emitter voltage of 75 V, it's suitable for switching an...

SKU: LB-LS3808 | Brand: Little Bird

A pack of 10 large alligator clip test leads with 45 mm spring-loaded clips — bigger than standard clips for easier handling and a more secure grip. Each lead is 50 cm long with a rubber-shrouded alligator clip on eac...

SKU: SF-PRT-12899 | Brand: SparkFun

A single-cell 18650 battery holder with wire leads for easy integration into projects. Drop in an 18650 lithium-ion cell and connect the bare wire leads to your circuit — no soldering to the battery required. Two 6" ...

SKU: LB-SOLAR-M | Brand: Little Bird

A compact micro solar panel rated at 1.5 V and 400 mA (0.65 W peak), fitted with pre-soldered male jumper wires for direct breadboard use. Its small 80×60 mm form factor makes it easy to integrate into DIY solar proje...

SKU: TB-PB8820 | Brand: Little Bird

A mid-sized solderless breadboard with 400 tie points for prototyping electronic circuits. Features 300 tie points in the centre section and 100 tie points across two power rails, providing a solid platform for Arduin...

SKU: PR-PIM247 | Brand: Little Bird

If you're going to be adding and removing wires to a project, these 2.54 pitch headers are an ideal way to make it easy and reliable. This box has a useful selection. Maker Essentials are components and useful bits...

SKU: TB-PH9234 | Brand: Little Bird

We call these safety clips because the side of the clip totally covers the battery terminals and sits flush on the top of the battery. Supplied with high quality AWG24 connection cable. Cable exits the clip at the si...