Prototyping

SKU: PL-1906 | Brand: Pololu

These 1×7-pin crimp connector housings let you quickly build custom cables that mate with standard 0.1" (2.54mm) spaced connectors. Pair them with pre-crimped terminal wires to create reliable, removable seven-wire co...

SKU: SF-PRT-12791 | Brand: SparkFun

This is a 2x23 pin male PTH header. This piece is in the common configuration for Beaglebone Black headers that can be broken apart to form smaller header formations. Each pin has a spacing of 0.1" in between each oth...

SKU: AF-1816 | Brand: Adafruit

A 10-segment LED bar graph display in white. At just 1" (25mm) long, it's compact enough to plug directly into a breadboard while remaining clearly visible. The diffused rectangular lenses give a clean, even glow acro...

SKU: SF-PRT-10359 | Brand: SparkFun

This is a simple four wire cable. Great for jumping from board to board or just about anything else. These cables mate with the connectors listed below. They have bare wires on one end and a 4-pin JST SH connector on ...

SKU: SF-PRT-12753 | Brand: SparkFun

A 6-pin analog (RH) British Telecom connector in the BTA female format, commonly used for Vernier analog sensor interfaces. Similar to RJ11 connectors but with a side-mounted lock instead of a bottom hook, the BTA is ...

SKU: SF-PRT-12718 | Brand: SparkFun

PCB mount clip to hold a AAA battery. Sold in single units, you’ll need two for each battery. These work great for small, low power applications that need a battery to run. Low cost and easy to use!Documents:Datasheet

SKU: SF-BOB-12708 | Brand: SparkFun

This is the SparkFun Real Time Clock (RTC) Module, this little breakout that uses the DS1307 to keep track of the current year, month, day as well as the current time. The module comes fully assembled and includes a s...

SKU: SF-PRT-10030 | Brand: SparkFun

This 2 mm pitch 10-pin SMD socket mates with XBee radio modules from Digi. The surface-mount design is ideal for custom PCBs and production boards where through-hole mounting isn't suitable. You'll need two of these ...

SKU: DF-FIT0475 | Brand: DFRobot

This plywood case is a solid enclosure for your LattePanda Windows 10 SBC. The case protects the board from ESD damage while letting you see status LEDs and providing access to USB, HDMI, SD card, GPIO and anten...

SKU: SF-COM-09855 | Brand: SparkFun

A bulk pack of 25 standard green 5 mm through-hole LEDs, supplied in a reusable ESD-safe bag. These are basic, reliable LEDs suitable for indicators, prototyping, and any project that needs visible green light. Speci...

SKU: SF-COM-09852 | Brand: SparkFun

We all know that you can never get too many LEDs. Don’t worry, we’ve got you covered. This is a pack of 25 LEDs all conveniently packaged in a nice reusable ESD safe bag. Make that next project shine!

SKU: PL-1801 | Brand: Pololu

These premium wires are stranded 26 AWG wires with female terminals on one end and male terminals on the other end. Together with our 0.1″ crimp connector housings, these wires can be used to make custom cables with 0...

SKU: AF-845 | Brand: Adafruit

Need some big indicators? We are big fans of these huge diffused red LEDs. They are fairly bright so they can be seen in daytime, and from any angle. They go easily into a breadboard and will add that extra zing to yo...

SKU: AF-844 | Brand: Adafruit

These large 10mm diffused green LEDs provide bright, wide-angle visibility that's easy to see even in daylight. The diffused lens spreads light evenly for a clean glow from any viewing angle, making them ideal as stat...

SKU: AF-847 | Brand: Adafruit

Need some big indicators? We are big fans of these huge diffused blue LEDs. They are really bright so they can be seen in daytime, and from any angle. They go easily into a breadboard and will add that extra zing to y...

SKU: TB-PS0376 | Brand: Little Bird

A 4-pin mini DIN panel-mount socket (S-Video / S-VHS type) with nickel-plated copper construction. The socket requires a 10mm panel cutout and uses solder tag termination for secure, permanent connections. Specificat...

SKU: PL-1756 | Brand: Pololu

These premium jumper wires are stranded 26 AWG wires with female terminations on one end and male terminations on the other end, for use with 0.1″ (2.54 mm) headers, connectors, and solderless breadboards. ...

SKU: SF-PRT-09387 | Brand: SparkFun

A pack of 10 premium male-to-male jumper wires, 12" (30cm) long. Compatible with breadboards, Arduino headers, and any 0.1" (2.54mm) pitch prototyping board. Assorted colours for easy circuit identification. Specific...

SKU: SF-PRT-09388 | Brand: SparkFun

This is a SparkFun exclusive! These are 12" long jumper wires terminated as male to male. Use these to jumper from any female header on any board. Multiple jumpers can be connected next to one another on a 0.1...

SKU: AF-2120 | Brand: Adafruit

If you've started designing your own PCBs in Eagle or KiCad and want to make your PCB a reality, you may start out with an etching system to pattern out traces. But that's only half the job! You'll also need a way ...