Prototyping

SKU: SF-PRT-10112 | Brand: SparkFun

This 2 mm pitch 10-pin header mates with 2 mm XBee sockets and is ideal for creating custom breakout boards, "dummy" XBee modules for testing, or any project requiring 2 mm pitch pin headers. Key Features 2 mm Pitc...

SKU: AF-735 | Brand: Adafruit

An 8-bit logic level shifter in a breadboard-friendly DIP package. The 74LVC245 converts between 3.3V and 5V logic levels, making it easy to interface modern 3.3V sensors and peripherals with 5V microcontrollers like ...

SKU: AF-1894 | Brand: Adafruit

A 6" × 6" (152 × 152 mm) sheet of DuPont Pyralux flexible PCB material — the same material used to make flexible circuits in smartphones and consumer electronics. One side is 1 oz (35 µm) copper, and the other is 25 µ...

SKU: AF-760 | Brand: Adafruit

A 40-piece set of premium male-to-male jumper wires in a rainbow ribbon cable format. Each wire is 12″ (300mm) long with 0.1″ (2.54mm) male header contacts on both ends, fitting cleanly on standard-pitch headers and b...

SKU: SF-PRT-09916 | Brand: SparkFun

This is a simple four wire cable. Great for jumping from board to board or just about anything else. There is a 4-pin JST connector on one end, bare cable on the opposite end. It also comes with the mating connector f...

SKU: SF-DEV-09911 | Brand: SparkFun

A bare OBD-II connector for building custom automotive diagnostic tools and vehicle data interfaces. OBD-II (On-Board Diagnostics II) is a standardised diagnostic port found on most cars, providing access to engine co...

SKU: AF-778 | Brand: Adafruit

A pack of 25 diffused white 3 mm LEDs — bright enough to be visible in daylight and with a wide viewing angle thanks to the diffused lens. They fit easily into breadboards and are perfect for indicators, status lights...

SKU: AF-793 | Brand: Adafruit

Handy for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are 12" (300mm) long and come in a 'strip' of 40 (4 pieces of each of ten rainbow colors). They have 0.1" female ...

SKU: SF-PRT-09750 | Brand: SparkFun

A 3-pin right-angle JST PH series through-hole connector with 2mm pin spacing. These compact connectors provide a solid locking connection and are rated for moderate current, making them a reliable choice for PCB-moun...

SKU: DF-DFR0019 | Brand: DFRobot

This is the very first prototyping shield for Arduino in the market since 2010. It comes with prototyping area that you can sold led , switch or other components, it also comes with a mini Arduino breadboard that can...

SKU: SF-COM-09650 | Brand: SparkFun

LEDs - those blinky things. A must have for power indication, pin status, opto-electronic sensors, and fun blinky displays. This is a very standard green LED. The lens is 3mm in diameter, and is diffused.

SKU: AF-1955 | Brand: Adafruit

These Male/Male Jumper Wires are handy for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are 12" (300mm) long and come in a 'strip' of 20 (2 pieces of each of ten rainbo...

SKU: SF-CAB-09556 | Brand: SparkFun

This is an interface cable for the Bus Pirate, designed to connect to its 2x5 I/O header. The cable’s connector is composed of two rows of five 0.1" spaced pins; it’s also polarized, as is the mating connector on-b...

SKU: AF-2017 | Brand: Adafruit

Add a micro-slice standard solderless breadboard to your Perma-Proto or other perf-board. This 2x4 point solder-less breadboard is a good way to add some solderless prototyping space if you just need to have...

SKU: SF-COM-09483 | Brand: SparkFun

A basic 4-digit 7-segment display in red. This common anode display features one decimal point per digit, plus individually controllable apostrophe and colon points — perfect for clocks, counters, and numeric readouts...

SKU: SF-PRT-09385 | Brand: SparkFun

A pack of 10 premium 12″ (30 cm) male-to-female jumper wires for breadboarding, prototyping, and connecting to 0.1″ pitch headers. Each wire has a male pin on one end and a female socket on the other, making them vers...

SKU: SF-COM-13326 | Brand: SparkFun

Sometimes when you have too many choices, it’s hard to make a good decision. In fact, there are times when you just want a bag of LEDs, just one of each, that’s all you want. Well here you go! The LED Mixed Bag con...

SKU: LB-WHITE-100 | Brand: Little Bird

A bulk pack of 100 white 5mm through-hole LEDs. These standard LEDs are ideal for power indicators, status lights, and general-purpose projects. Key Features 5mm Diameter – Standard size for breadboards and PCBs W...

SKU: LB-LR0231 | Brand: Little Bird

A 4×4 matrix membrane keypad with 16 tactile buttons, ideal for adding user input to microcontroller projects. The keypad uses a standard 8-pin matrix wiring scheme (4 rows × 4 columns), requiring only 8 GPIO pins to ...

SKU: LB-LS1177 | Brand: Little Bird

Laser Detector Module Want to set up your own laser tripwire? These little modules make it super simple. Just hook one up to your Arduino, line it up with a laser pointer, and you’ve got a working laser detection syst...