Prototyping

SKU: PL-970 | Brand: Pololu

The 0.100″ (2.54 mm) Shorting Block is a removable jumper with a closed-top black housing, designed to bridge two adjacent pins on a standard 0.1″ pitch male header. Shorting blocks are essential for configuring hardw...

SKU: PL-968 | Brand: Pololu

The 0.100″ (2.54 mm) Shorting Block is a removable jumper with a closed-top blue housing, designed to bridge two adjacent pins on a standard 0.1″ pitch male header. Shorting blocks are essential for configuring hardwa...

SKU: TB-RC5335 | Brand: Little Bird

A pack of 2 general-purpose ceramic disc capacitors rated at 820 pF and 50VDC. Ceramic capacitors are non-polarised and suitable for a wide range of applications including decoupling, filtering, and timing circuits. ...

SKU: SF-BOB-10467 | Brand: SparkFun

This simple breakout board makes it easy to use our LED tactile switches in a breadboard, or your next project. Note: Populate the board according to the polarity of the LED on the switch. The markings for the swi...

SKU: SF-COM-10443 | Brand: SparkFun

This is a simple LED-illuminated tactile button with a clear cap. It’s just like a basic tactile button, but it lights up blue! So now you can get visual feedback, or light up your project. These have a 12mm body a...

SKU: SF-COM-10442 | Brand: SparkFun

A tactile push button with a built-in red LED, combining momentary switching with visual feedback in a single component. Press the button and it lights up red — ideal for control panels, interactive projects, and anyw...

SKU: SF-COM-10440 | Brand: SparkFun

This is a simple LED-illuminated tactile button with a green cap. It’s just like a basic tactile button, but it lights up green! So now you can get visual feedback, or light up your project. These have a 12mm body and...

SKU: SF-COM-10439 | Brand: SparkFun

This is a simple LED-illuminated tactile button with a clear cap. It’s just like a basic tactile button, but it lights up white! So now you can get visual feedback, or light up your project. These have a 12mm body and...

SKU: AF-3347 | Brand: Adafruit

A pack of 10 tactile push buttons with a polished metal ball actuator, giving them a distinctive industrial look. The rounded top also makes them forgiving when pressed at an angle — useful for mechanical actuator set...

SKU: AF-3307 | Brand: Adafruit

Fire up your engines because these are the hot-rods of toggle switches! Equipped with an aerodynamic green protective casing, and a green LED at the tip of the switch, this Green LED Toggle Switch is sure&nb...

SKU: DF-FIT0455-Y | Brand: DFRobot

INTRODUCTION Comes in your choice of red, green, blue, yellow or white. This button locks and lights up when pushed. It's perfect for DIY projects which require a button and it's easy to mou...

SKU: DF-FIT0455-R | Brand: DFRobot

INTRODUCTION Comes in your choice of red, green, blue, yellow or white. This button locks and lights up when pushed. It's perfect for DIY projects which require a button and it's easy to mou...

SKU: DF-FIT0455-W | Brand: DFRobot

A self-locking illuminated push button with a white LED indicator. When pressed, the button locks into position and the LED lights up; press again to release. The built-in LED includes a resistor for direct 5–12V oper...

SKU: DF-FIT0455-B | Brand: DFRobot

INTRODUCTION Comes in your choice of red, green, blue, yellow or white. This button locks and lights up when pushed. It's perfect for DIY projects which require a button and it's easy to mou...

SKU: SF-PRT-12748 | Brand: SparkFun

A standard SMD (surface-mount) DC barrel power jack for use with common DC wall adapters. This is the same connector size used on most Arduino boards and many other development platforms. Key Features Surface-Mount...

SKU: AF-1820 | Brand: Adafruit

This 1.2″ 8×8 LED Matrix features 64 pure green LEDs arranged in a square grid, perfect for building scrolling signs, simple animations, or small pixel displays. The compact package plugs directly into a breadboard wi...

SKU: AF-1784 | Brand: Adafruit

Turn any surface/wall/table etc into a speaker with a surface transducer. This type of speaker does not have a moving cone like most speakers you've seen. Instead, a metal rod is wrapped with the voice coil. When c...

SKU: AF-1929 | Brand: Adafruit

Build your own open-source 8×8 button grid controller with the Adafruit UNTZtrument kit. Designed by PaintYourDragon and based on the Adafruit Trellis platform, this DIY kit features 64 translucent silicone buttons wi...

SKU: SF-PRT-09922 | Brand: SparkFun

A six-wire cable assembly with a 6-pin Molex connector (0.1″ spacing) on one end and bare wires on the other. Includes the mating connector, making it easy to create board-to-board connections or custom wiring harness...

SKU: SF-PRT-09918 | Brand: SparkFun

A two-wire jumper cable with a 2-pin Molex connector (2.54 mm / 0.1" spacing) on one end and bare wire on the other. Includes the mating connector for the Molex header. Useful for board-to-board connections and genera...