Prototyping

SKU: PR-PIM086 | Brand: Little Bird

A laser-cut acrylic base plate that replaces the bottom layer of a Pibow case, adding a secure mounting area for breadboard prototyping alongside your Raspberry Pi. Compatible with Raspberry Pi 3, A+, Zero, and Zero W...

SKU: AF-1378 | Brand: Adafruit

The WS2811 is the driver IC used in NeoPixel LED strips and pixels. In this SOIC-8 package, it lets you build your own addressable RGB LEDs by driving a single common-anode RGB LED or three individual single-colour LE...

SKU: PI-COM1304 | Brand: Pimoroni

A 4×AA battery holder with press-stud (snap) termination, providing a portable power source for wearable and on-the-go projects. With four alkaline AA batteries, it delivers approximately 6V with 7,000–10,000 mAh of c...

SKU: AF-1389 | Brand: Adafruit

Make your own USB connections without slicing apart a USB cable and soldering those thin wires inside. These DIY "USB shells" are available in USB A plug, micro B, mini B and USB A socket.Each shell comes with a tw...

SKU: AF-1451 | Brand: Adafruit

Diffused 5mm tri-colour LEDs with separate red, green, and blue chips inside a square "Piranha" (super-flux) package. With a 90° viewing angle and up to 3000mcd combined brightness, these LEDs are great for colour mix...

SKU: AF-1445 | Brand: Adafruit

A clean, rounded 16mm panel-mount momentary pushbutton in red. This normally-open micro-switch connects the contacts only while pressed, making it a straightforward input for any project enclosure or control panel. K...

SKU: AF-1518 | Brand: Adafruit

The Adafruit Flex Perma-Proto is a half-sized breadboard-layout prototyping board made from ultra-thin polyamide film. It bends, twists, and can even be cut to shape with scissors — perfect for wearables, curved enclo...

SKU: TB-SP0603 | Brand: Little Bird

A normally open SPST micro tactile switch in a compact 6×6mm package. This single-action momentary push button is designed for PCB mounting and is suitable for a wide range of electronics projects and prototyping appl...

SKU: TB-RR2846 | Brand: Little Bird

A pack of two 1 MΩ carbon film resistors rated at 1 W continuous power. These through-hole axial resistors feature colour-coded bands for easy identification and solder legs for breadboard or PCB mounting. Specificat...

SKU: AF-3691 | Brand: Adafruit

You've done such a great job making your own electronic control panel that the last thing you need are those wires to get pulled out and frizzy. These fancy Panel-Mount Banana Jacks look good and ...

SKU: AF-1494 | Brand: Adafruit

Kiss those days of heat-shrink, melted jacketing and clumsily-arranged third-hand tools goodbye! Go 'cold splice' with these snap-able plastic splices for fast connections. Use with any 22-26 AWG solid core wire and s...

SKU: SS-110990032 | Brand: Seeed Studio

A pack of 50 individual jumper wires, each 100 mm long with female connectors on both ends (female-to-female). These single-pin wires are ideal for making point-to-point connections on breadboards, between header pins...

SKU: AF-1612 | Brand: Adafruit

The NeoPixel Mini PCBs are among the smallest addressable RGB LED breakouts available. Each tiny board measures just 8 × 10 mm and features two sets of three solder pads on the back for easy wiring. The pixels are cha...

SKU: AF-1539 | Brand: Adafruit

Breakaway header is like the duct tape of electronics. Its great for connecting things together, soldering to perf-boards, fits into any breadboard, etc. We go through these guys real fast, and thought that given how ...

SKU: AF-1540 | Brand: Adafruit

Breakaway header is like the duct tape of electronics. Its great for connecting things together, soldering to perf-boards, fits into any breadboard, etc. We go through these guys real fast, and thought that given how ...

SKU: AF-1675 | Brand: Adafruit

A 150mm IDC ribbon cable with 10-pin 2×5 socket connectors at 1.27mm (0.05") pitch on both ends. Designed for SWD (Serial Wire Debug) programming and debugging connections commonly found on ARM Cortex development boar...

SKU: AF-1682 | Brand: Adafruit

This 50-pin FPC (Flexible Printed Circuit) cable is ultra-thin and flexible, ideal for tight spaces where a round cable would be too bulky. At 250mm (10″) long with 0.5mm pitch contacts, it's a common format used in d...

SKU: AF-2003 | Brand: Adafruit

Super-flexible, silicone-sheathed stranded-core wire in black. The silicone insulation is incredibly soft and supple, making this wire ideal for wearable electronics, robotics, and any project where the wiring needs t...

SKU: AF-1882 | Brand: Adafruit

Silicone-sheathing wire is super-flexible and soft, and its also strong! Able to handle up to 200°C and up to 600V, it will do when PVC covered wire wimps out. We like this wire for being extremely supple and flexible...

SKU: AF-1793 | Brand: Adafruit

Need some really bright LEDs? We are big fans of these 5mm clear UV / Purple LEDs. These emit UV 'blacklight' in the UVA spectrum so they are great for projects with fluorescent materials referred to as UV/blacklight-...